-10%
Close
Amprobe 4 Earth Roads With Leads
- 4 Earth Roads with Leads
- For use with the Amprobe DM-III Multitest and DM-III Multitest Flex Power Quality Recorders
Amprobe AC50A AC Leakage Clamp Meter
Product Features:
- AC current measurement to 60A
- Leakage current measurement with resolution of 0.01mA
- AC voltage to 400V
- Resistance measurement and continuity beeper
- Min/max control to see largest or smallest values in series of measurements
- Relative value measurement to determine differentials
- Data hold to freeze measurement value on display
- Digital display with analog bargraph
- Jaw opening: 30 mm (1.2 in)
- Auto-power off to save battery life
- Minimum resolution 0.01mA
Amprobe ACD-10 TRMS-PLUS 600 A Clamp Multimeter
- AC/DC Voltage to 600 V
- AC Current to 600 A
- Thin jaws, only 0.4″ (10 mm) thick
- Resistance to 40 MΩ
- Continuity buzzer
- Capacitance to 3000 uF
- Frequency measurement
- In rush current
- Hold maximum reading functions
- Accommodates conductors up to 1.02″ (26 mm) in diameter
- Auto ranging
- Auto power off
- Rubber over-molded case
- Overload protected
- True-rms measurement
Amprobe ACD-53NAV CAT IV 1000 A AC True-rms Navigator Clamp Meter
- True RMS technology improves accuracy in noisy environments
- Measures AC/DC voltage to 1000 V, AC/DC current to 600 A, plus resistance, frequency, capacitance, power and power factor, total harmonics distortion (THD) and individual harmonics from 1 to 25
- Includes inrush current measurement and phase rotation indication for 3-phase motors
- Non-contact voltage detection enhances safety
- Low pass filter enables measuring voltage and frequency on variable frequency drives
- Continuity beeper quickly identifies shorts and opens
- Large backlit digital display with analog bar graph presents the full picture
- Min, max and smart data hold
- Peak hold identifies spikes and transients
- In-jaw flashlight automatically lights when jaws open to illuminate dark panels and junction boxes
- Auto power off conserves battery life
- Maximum jaw opening accommodates large conductors up to 1.45″ (37 mm)
- Rubber overmold body absorbs shocks—drop proof to 4 feet (1.2 m)
- CAT IV-rated AC/DC current clamp meter
Close
Amprobe AF-600 A-Frame Cable Ground Fault Locator
- Optional accessory for Amprobe UAT-600 Underground Utilities Locator Series
- Works in conjunction with the UAT-600-T Transmitter
- Locate cable and wires ground faults, sheath faults or pipeline coating defects (direct contact of the utility with the ground is required to pinpoint a fault)
- Used to find the point where metal is touching the ground (shield is rusted/rubber buffer is broken) and power is leaking, creating noise on a cable
- Find the point of leakage around a cable (ground faults are common problems with electric cables) – saves money by pinpointing leakage point
- Adjustable volume control
- Advanced technology and digital signal processing makes pinpointing process fast, accurate and unambiguous:
- Compass guidance with numeric fault field strength indicates direction to the place of the fault
- Distance sensitive left/right guidance guides the user to precisely follow the path of the buried utility
- Automatic gain control quickly detects tracing signal and precisely adjust A-Frame sensitivity
Amprobe ALC-110 Leakage Current Clamp
Product Features:
- Measures:
- Earth and differential leakage currents
- Leakage currents through the earth (PE) conductor
- Appliance current consumption without interruptions to the circuit
- Low influence of external low frequency magnetic fields: @ IN: 3.500 mA – 600.0 mA ≤ 30 A/m, operating class 2
- True-RMS measurements for accuracy when measuring complex, non-sinusoidal waveforms
- Mechanical jaw lock with 1.2 in. (30 mm) opening assures accuracy of low current measurements
- Highest resolution of 0.001 mA while measuring up to 60 A
- Broad frequency range 15 Hz to 1 kHz
- Selectable filters:
- Low Pass 50/60Hz filter to perform measurements on equipment driven by Variable Frequency Drives (VFDs) or affected by high frequency noise
- Appliance Filter to conduct leakage current measurements on appliances
- No filter
- Selectable limits: 0.25 mA, 0.5 mA, 3.5 mA, 10 mA, 12 mA
- Max readings and hold function
- High safety rating: CAT III 600 V
- Battery-saving design with an auto backlight off and auto power off
Applications
- Trace the source of earth leakage current
- Identify intermittent GFCI trips without switching equipment off
- Check a system for an electrical break of insulation where current is flowing to the ground
- Where industrial leakage current testing is required
- Measures:
Amprobe AM-560 Advanced HVAC Multimeter
Product Features:
- Measures AC/DC voltage up to 1000V, AC/DC current, resistance, frequency, capacitance, temperature, and duty cycle
- Dual thermocouple takes simultaneous temperature readings on low and high side of an HVAC system
- Low pass filter accurately measures voltage on variable frequency drives
- Non-contact voltage detection enhances safety
- Audible continuity quickly identifies shorts and opens
- Diode test to verify diode polarity
- Data hold freezes the reading on the display for further analysis
- Peak hold (crest) captures and holds the peak value of a voltage or current surge
- MIN/MAX recording records min/max measurements over time to show voltage fluctuations
- Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range
- CAT IV 600V/CAT III 1000V safety rated for high voltage environments
Amprobe AMB-45 Insulation Resistance Tester
- Features
- Tests insulation of wires, cables, transformers and electrical motors
- Comes as a complete kit including test leads and PC software
- Selectable test voltages 250V, 500V and 1000V
- Programmable timer to perform the Dielectric Absorption Ratio Test
- Sensitive Ohmmeter for checking resistance of motor windings
- Built in voltmeter
- Fast and easy to use, rugged durable design
- Internal memory to store measurements for future reference
- Data download to PC
-10%
Close
Amprobe AT-3500 Underground Cable Locator
- Locates underground energized and de-energized wires, cables and pipes
- Three testing modes for best accuracy
- Passive power (50/60 Hz)
- Passive radio (RF)
- Active T-3500 signal generator with induction mode directly connected to the cable with test leads or optional clamp
- Active mode depth measurement up to 16’ (4.9 m)
- Semi-automatic gain control – fast signal location and control
- 33 kHz active frequency – best frequency for general locating
- Precise pinpointing of buried services and exceptionally fast sound and meter response with backlight multiple-segment bar-graph digital display and audible indicators
Amprobe AT-6010 Advanced Wire Tracer Kit
Amprobe AT-6010 Offers
With the AT-6010 advanced wire tracer kit, it is easier and safer to locate energized and de-energized wires, breakers and fuses. When the transmitter is connected to the circuit, the receiver easily detects the signal in the wires or cables behind walls, ceilings and floors. The transmitter works on energized and de-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments, allowing for work directly on an energized circuit without the need to take equipment offline. The transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage.
Features
- Receiver:
- Tip sensor – to trace wires in tight spaces
- Large black and white LCD screen
- Energized/De-energized indicator
- Signal strength bar graph
- Sensitivity adjustment
- Transmitter:
- Compatible with standard test leads
- Voltage warning indicator
- HI mode for general wire tracing
- Loop mode for finding shorts
- Simple one button operation
- Large LCD Receiver screen with two digit readout, bar graph and sound to easily determine wire location
- Compatible with the CT-400 Signal Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
Applications
- Trace energized and de-energized wires
- Identify breakers and fuses
- Connect to GFCI protected circuits
- Find breaks and opens
- Find shorts
- Trace wires in metal conduit
- Trace non-metallic pipes and conduit
- Trace shielded wires
- Trace underground wires
- Trace low voltage wires and data cables
- Sort bundled wires
- Map a circuit with test leads
- Trace breakers on system with light dimmers
- Receiver:
Amprobe AT-6020 Advanced Wire Tracer Kit
Product Features:
- Traces wires in walls, ceilings, floors and corners
- Locates breakers and fuses
- Pinpoints shorts and opens
- High resolution 2.5″ TFT LCD color display
- Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits
- Comes with custom Amprobe hard carrying case, test leads, and accessories
- Compatible with optional Signal Clamp (CT-400) clamp-on attachment and TIC 410A Hot Stick attachment to extend your reach
Three Transmitter signal modes:
- “High Signal” mode for normal circuits
- “Low Signal” mode for precision tracing in difficult areas
- “Loop” mode for closed loop de-energized circuits
Four Receiver tracing modes:
- “Quick Scan” mode allows for quick wire detection at a longer distance
- “Precision” mode precisely pinpoints wires or faults located behind walls, floors, or ceilings
- “Breaker Identification” mode facilitates quick and easy breaker locating
- “Non-Contact Voltage Detection” mode utilizes passive tracing without the Transmitter to verify if a wire is energized
Amprobe AT-8020 Advanced Industrial Wire Tracer Kit
Product Features:
- Trace energized and de-energized wires in walls, ceilings, floors and tight spaces
- Identify breakers and fuses
- Pinpoints shorts and opens
- Non-contact voltage mode and passive tracing
- High resolution 3.5 in (89 mm)
- TFT LCD color display
- Three power modes
- “High” power mode for normal circuits
- “Low” power mode for precision tracing in difficult areas
- “Loop” power mode provides a boosted signal using the signal clamp
- Two automatically selected frequency modes for optimal tracing on energized and de-energized circuits
- Embedded help screens for easy, error free set-up
Amprobe CT-400 Signal Clamp
Product Features:
- Used to induce a signal into wires without access to bare conductors
- For use with wire tracers and kits
- Operating voltage: 0 to 1000 V AC
- Operating frequency: Wire tracing: 32.768 kHz / AC current measurement: 45 Hz to 400 Hz
- Use the CT-400 Signal Clamp with the AT-6000-T to induce signal into wires when there is no access to bare conductors
- CAT IV 600 V, CAT III 1000 V
-10%
Close
Amprobe Download Module For Amprobe Clamps
Amprobe Download Module For Amprobe Clamps Features
- Software for Transferring Data to PC
- Accessory for Amprobe ACD-45PQ Power Clamp Meter
-10%
Close
Amprobe Download Module For Amprobe Precision Multimeters
Amprobe Download Module For Amprobe Precision Multimeters Features
- Comes with cables for connecting a compatible Amprobe meter to a computer to transfer data to the computer.
- Includes software that provides a graphical user interface for working with transferred data
- Includes one USB cable and one RS-232 cable for connecting to any of several compatible devices
- Comes with a USB-to-RS-232 adapter for converting an RS-232 connection to a USB connection, and the other way around
- Can be used with computers running the Windows 95, 98, NT, ME, 2000, XP, or 7 (32-bit and 64-bit) operating system
Amprobe IR-720 Infrared Thermometer
Product Features:
- 20:1 Distance to Spot Ratio
- Temperature Range of -26°F to 1922°F or -32°C to 1050°C
- Precision accuracy and rapid response time
- Laser pointer, backlit dual LCD Display
- Auto display hold and MAX/MIN memory
- Adjustable emissivity for measuring a variety of materials
- Supplied with: Carrying bag, Battery and Instruction Manual
Amprobe IR-730 Infrared Thermometer
- Check AC units, ventilation, bearings, motors and transformers for overheating, bad electrical connections and fuses
- 30:1 Distance to Spot Ratio
- Temp Range of -26 °F to 2282 °F
- Precision accuracy and rapid response time
- Laser pointer, backlit dual LCD Display
- Auto display hold and MAX/MIN memory
- Adjustable emissivity for measuring a variety of materials
Amprobe IR-750 Infrared Thermometer
- Check AC units, ventilation, bearings, motors and transformers for overheating, bad electrical connections and fuses
- 50:1 Distance to Spot Ratio
- Temp Range of -58 °F to 2822 °F
- Precision accuracy and rapid response time
- Laser pointer, backlit dual LCD Display
- Auto display hold and MAX/MIN memory
- Adjustable emissivity for measuring a variety of materials
- 99 memory locations and PC download cable included
Amprobe MAN15 Differential Pressure Manometer up to 15 psi
- Measuring range up to 15 PSI (103.5 kPA)
- Necessary tool for gauge and differential pressure measurement
- Perfect for applications such as: valves, control sensors in a pneumatic control environment, HVAC/R pressure levels and medical pressure systems
- 11 selectable units of measure: bar, mmHg, ozin2, kgcm2, psi, inH2O, kpa, ftH2O, inHg, cmH2O, mba
- Maximum and minimum value recordings with time stamp help adjust and trouble shoot the pressure systems
- Data hold
- Large backlight LCD
- Auto power off function
- Built-in computer USB port for data downloads with optional PC cable and software
Amprobe NCV-1020 Non-Contact Voltage Probe
- Features
- Voltage detection from 50 to 1000 V AC
- Audible (buzzer) and visual (LED) voltage indication
- On/Off switch
- IP65 rated water and dust resistant
- CAT IV 1000 V safety rated
Applications
- Detect the presence of AC voltage in cables, circuit breakers, wall sockets, junction boxes, fuses, extension cords
- Test voltage through wire insulation
- Identify cable breaks in wires, cords and lightning systems connected in series
- Identify polarity (line vs. neutral) of receptacles and cables
Amprobe NCV-1030 Non-Contact Voltage Probe
Product Features:
- Detects the presence of AC voltage in cables, circuit breakers, wall sockets, junction boxes, fuses, extension cords and more
- NCV Sensitive range: 12V to 50VAC
- Voltage Detection Range: 50 to 1000VAC
- Tests voltage through wire insulation
- Identifies cable breaks in wires, cords and lightning systems connected in series
- Identifies polarity (line vs. neutral) of receptacles and cables
- Safely tests voltage in non-contact way
- Safety CAT IV 1000 V rated for wide range of applications
- IP65 rated (water and dust resistant) for indoor and outdoor use
Amprobe NCV-1040 Non-Contact Voltage Probe
Amprobe NCV-1040 Offers
The Amprobe NCV-1000 series Non-Contact Voltage (NCV) tester provides maximum safety and convenience for detecting AC voltage without interrupting electrical systems. Safety tested to the highest category measurement, CAT IV 1000 V, as well as IP65 water and dust resistant, the NCV-1000 series is fit for the toughest industrial applications.
Features
- Non-contact voltage detection up to 1000 V AC
- Built-in flashlight
- Water and dust resistant – IP65 rated
- Audible (buzzer) and visual (LED) voltage indication
- On/off switch
- Auto power off
- CAT IV 1000 V safety rated
- Magnetic solenoid testing
- Low battery indication
Applications
- Detects the presence of AC voltage in cables, circuit breakers, wall sockets, junction boxes, fuses, extension cords and more
- Tests voltage through wire insulation
- Identifies cable breaks in wires, cords and lighting systems connected in series
- Tests voltage without contact
- Safety CAT IV 1000 V rated for a wide range of applications including industrial, commerical, and residential
- Water-resistant IP65 rated for indoor and outdoor use
- Magnetic solenoid detection to diagnose electromagnets and relays
Amprobe PM51A Pocket Digital Multimeter
- Measures AC and DC voltage, resistance, continuity with beeper, capacitance and frequency
- Fully autoranging with 7 measurement functions and 27 ranges
- Large oversize digital display with measurement results and the unit icon
- Data hold freezes measurement value
- Average sensing
- Power consumption (typical) 2 mA
- Automatic power off (idle for 30 minutes)
- APO consumption (typical) 2.2 μA
- E.M.C. meets EN61326
- Audible continuity tester open circuit voltage 0.4 V DC typical
- Diode tester test current (typical) 0.25 mA
- Diode tester open circuit voltage 1.6 V DC
