Fluke TLK291 Fused Test Probe Set
Features
- Provides firm and secure contact
- 32 to 104°F (0 to 40°C) operating temp
- 80% RH max
- CAT III 1000V, 0.5A rated
- Pollution degree 2
-10%
Close
Fluke TLS430 Test Leads and Alligator Clips
Features
- CAT IV 600V safety rating
- CAT III 1000V safety rating
- For use with 430 Series
Fluke TP1 Slim Reach Test Probes
Features
- One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals
- Hard stainless steel probe tips
- Flat blade design to hold securely in blade type electrical wall sockets
- CAT II 1000V, 10 A rating
Fluke TP165X Probe
Features
- Probe designed for 1500 and 1650 series
- Tip length up to 0.735in
- Tip diameter of 0.04in
- Slim probe with test button keeps your eyes on the panel while probing hard to reach points.
Fluke TP175 TwistGuard™ Test Probes 2mm Diameter Probe Tips
Key features
- Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements
- Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
Fluke TP175E Twistguard Test Probes – 2mm Diameter Probe Tips with 4mm Adapters
Product Features:
- Adjustable tip length for increases safety and precision
- Conforms to EN61010-031
- Safety rating(s): CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2
- UL listed
- For use with TL220 Series and Models TL238 and TL27
Fluke TP2 Slim Reach Test Probes
Features
- CAT II 1000V safety rated
- CAT III 1000V & CAT IV 600V with protective cap
- 10A rating
- UL listed
- 1-year warranty
Fluke TP220 SureGrip Test Probes
Product Features:
- Designed for probing closely spaced or recessed terminals
- Hard stainless steel probe tips
- Flat blade design holds securely in blade type electrical wall sockets
- Safety rating(s): CAT IV 600V, CAT III 1000V, 10A
- UL listed
- Rubber overmolded surfaces and finger-hugging curves
- Sharp, 12 mm stainless tip provides reliable contact
- For use with Models TL222 and TL224
- 1 – SureGrip Industrial Test Probe (Red)
- 1 – SureGrip Industrial Test Probe (Black)
-10%
Close
Fluke TP38 Slim Reach Test Probes
Features
- 0.95in (24mm) tip length (includes insulated part)
- Only 0.16in (4mm) of tip is exposed
- CAT IV 600V & CAT III 1000V safety rating
- 10A rated & UL listed
- 1-year warranty
Fluke TP4 Slim Reach Test Probes
Features
- One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals
- Hard stainless steel probe tips
- 0.16″ (4 mm) diameter probe tip designed to fit securely into IEC electrical wall outlets
- CAT II 1000 V, 10 A rating
-10%
Close
Fluke TP40 Automotive Back Probe Pins (five)
- Banana jack accepts all DMM and banana jack leads
- Tested to 60 V DC
- Pack of 5
Fluke TP74 Lantern Tip Test Probe
Product Features:
- Tips include banana-style spring contacts with nickel-plated brass ends
- Safety rating(s): CAT II 1000V, 10 A rating; CAT III 1000V, only with protective cap
Fluke TP80 Electronic Test Probes
Fluke TP80 Offers
- One pair (red, black)
- IC insulated cap prevents shortening of IC legs for probing high density components or boards
- CAT III 1000 V, 10 A rating. UL listed
- One year warranty
-10%
Close
Fluke TP81 Insulation Piercing Clip Set
- Banana jack accepts all DMM and banana jack leads
- Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead
- For use with test leads with 4 mm banana plugs
- Tested to 60 V DC
-10%
Close
Fluke TP82 Insulation Piercing Clip Set
- Banana jack accepts all DMM and banana jack leads
- Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead
- For use with test leads with 2 mm probes
- Tested to 60 V DC
-10%
Close
Fluke TP88 Rigid Back Probe Pins
Features
- A sharp point ensures good contact to the electrical connector, and the pin’s insulation protects it from shorting to other wires
- Slides onto test probes measuring 2 mm (0.08 inches)
- Tested to 60 V DC
- Slides onto 2 mm (0.08″) test
- Probe length of 51mm (2″)
- Rated to 60 V dc
-10%
Close
Fluke TP920 Test Probe Adapter Kit
Product Features:
- Push-on adapters
- IC test adapters
- Extended probe tips
- Medium alligator clips
- Max.opening 7.6 mm
- Safety rating(s): CAT III 300V, 3A
- For use with Models TL71 and TL75
- 1 – Probe Tip Adapter (Red)
- 1 – Probe Tip Adapter (Black)
- 1 – Probe Tip Extender (Red)
- 1 – Probe Tip Extender (Black)
- 1 – Medium Alligator Clip (Red)
- 1 – Medium Alligator Clip (Black)
Fluke TPAK ToolPak Magnetic Meter Hanger
Fluke ToolPak Offers
Take hands-free measurements with the Fluke TPAK ToolPak™ Magnetic Meter Hanger. The kit allows you to hang your meter in a variety of ways—including on nails, hooks and many other objects—solving any hanging and positioning problem you may face.
Please note that the TPAK doesn’t clip into the Fluke T6 Series like it does for other Fluke meters. Instead, you must simply feed the Velcro loop through the slot on the back of the T6 and Velcro it together.
Features
- Powerful magnetic hanger allows you to hang your meter on any metallic surfaces
- 9 inch hook and loop strap allows you to loop around pipes
- Hook hanger for hanging on non-magnetic surfaces
- General purpose hanger allows you to hang your meter on nails, hooks and many other objects
- Compatible with many Fluke instruments
- One year warranty
-10%
Close
Fluke VR1710 Voltage Quality Recorder
- Fast and easy recording of voltage trends, dropouts, and power quality – Easily pinpoint the root cause of single phase voltage problems
- Extremely easy to use – Plug directly into the mains power socket and capture data
- Continuous recording of all values with no gaps – Save testing time by getting the whole picture with one instrument that records both events and voltage
- Clear graphical summary of data and quick overview of key power quality parameters – Take the guesswork out of diagnosing voltage quality problems
- Min, Max, and Average RMS values (1/4 cycle) with time stamp – Quickly see what happened and when
- Actual transient display (>100 ?s) with time stamp – Identify power quality issues quickly with included graphical software
- Flicker recording to EN 61000-4-15, individual harmonic and THD values with trends – Easily identify if the problem is power quality or equipment related
- Statistical analysis of single phase voltage events – Reduces analysis time by tracking event quantities and magnitudes
- Includes PowerLog software package for quick download, analysis, and automatic reporting – Save time by generating power quality reports automatically with pre-set templates
-11%
Close
Fluke VT04 Charger
USB charger for use with Fluke VT04, includes AC adaptor.
Fluke WC100 multi color wire clips
What’s included with the Fluke WC100
- Fluke WC100 multi color wire clips
-10%
Close
Fluke XEthernet Ethernet 5m Connector for the TIX1000, TIX660 and TIX640 Infrared Cameras
Gigabit-Ethernet cable with LEMO connector, 5m.
Fluke Zero Adapter For Fast And Easy Test Lead Compensation
Fluke Zero Adapter For Fast And Easy Test Lead Compensation Features The Fluke Zero Adapter for the 1650 & 1660
