Fluke 810T Non-Contact Precision Laser Tachometer for the 810
Measure the speed of motors, conveyor belts, and other moving and rotational systems with this tachometer. Additionally, this instrument is
-10%
Close
Fluke 830/MAGNET Mounting Set
Compact magnetic sensor and prism mounting bracket set.
Fluke 830/SHIMS Alignment Set
Precision alignment shim kit that corrects vertical misalignment.
-10%
Close
Fluke 85RF II High-Frequency Probe, 500 Mhz
Product Features:
- Voltage Range: 0.25 to 30Vrms
- Maximum Input Voltage: 30Vrms, 200V DC
- AC to DC Ratio: 1:1
- Ratio Accuracy (At 25 MHz and loaded with 10 M ohm): Above 0.5V: +/- 0.5 dB; Below 0.5V: +/- 1.0 dB; Add +/- 0.2 dB in RF fields of 1 to 3 V/m
- Frequency Response (Relative to 25 MHz): 100KHz to 100 MHz +/- 0.5 dB; 100 MHz to 200 MHz +/- 2.0 dB; 200 MHz to 500 MHz +/- 3.0 dB
-9%
Close
Fluke AC173 Bucktooth Alligator Clip Set
Fluke AC173 Offers
BUCKTOOTH ALLIGATOR CLIP SET
Fluke AC175 Alligator Clip Set
Product Features:
- Slide-on alligator clips
- Clip jaws provide 8 mm opening with flexible boots
- Compatible with 4 mm banana plugs and test leads
- Safety rating(s): CAT IV 600V, CAT III 1000V, 10A
- For use with Models TL71, TL75, TL175 and TP175
-10%
Close
Fluke AC220 Alligator Clips
Product Features:
- Rubber overmolded surfaces and finger-hugging curves for comfortable, reliable grip
- Small, insulated, nickel-plated jaws
- Blunt tip grabs round screw heads up to 9.5 mm
- Safety rating(s): CAT IV 600V, CAT III 1000V, 10A rating
- UL listed
- For use with Models TL222 and TL224
-10%
Close
Fluke AC280 Hook Clips
Product Features:
- Rubber overmolded surfaces and finger-hugging curves for comfortable, reliable grip
- Nickel-plated clips
- Profile narrows to 5.6 mm at tip
- Hook opening 6.4 mm at front, 2 mm at base
- Safety rating(s): CAT IV 600V, CAT III 1000V, 3A rating
- UL listed
- For use with Models TL222 and TL224
-11%
Close
Fluke AC283 Pincer Clips
Features
- 1A rating
- Use for continuity testing on circuit board components
- 4.49in (11.4cm) flexible insulated shaft
- CAT IV 600V, CAT III 1000V safety rated
- UL listed
- 1-year warranty
Fluke AC283A Heavy Duty, Plunger-Style Pincer Clip Set
- One pair (red, black) of nickel plated pincers open to 0.2″ (5 mm)
- 4.5″ (11.4 cm) flexible insulated shaft
- CSA listed
- Rubber overmolded surfaces and finger-hugging curves for comfortable, reliable grip
- Nickel-plated pincers
- Open to 5 mm 11.4 cm flexible insulated shaft
- Safety rating(s): CAT IV 600V, CAT III 1000V, 1A rating
- UL listed
- For use with Models TL222 and TL224
Fluke AC285 SureGrip Alligator Clips
Product Features:
- Rubber overmolded surfaces and finger-hugging curves for comfortable, reliable grip
- Nickel-plated steel jaws
- Multi-purpose tooth pattern grips anything from fine gauge wire to 20 mm bolts
- Safety rating(s): CAT IV 600V, CAT III 1000V, 10A
- For use with Models TL222 and TL224
Fluke AC285-FTP Fluke AC285-FTP Alligator Clips and Adaptors Model: AC285-FTP
Product Features:
- Rubber overmolded surfaces and finger-hugging curves for comfortable, reliable grip
- Nickel-plated steel jaws
- Multi-purpose tooth pattern grips anything from fine gauge wire to 20 mm bolts
- Safety rating(s): CAT IV 600V, CAT III 1000V, 10A
- For use with Models TL222 and TL224
-10%
Close
Fluke AC87 Heavy Duty Bus Bar Clips
Product Features:
- Flat, right angle design for connecting to bus bars
- Adjustable collar provides 2 ranges of jaw openings up to 30 mm
- Safety rating(s): CAT III 600V, 5A rating
- UL listed
|
-10%
Close
Fluke AC89 Piercing Test Clip
Product Features:
- Single probe pierces 0.25 to 1.5 mm insulated wire
- Small pin allows self-healing of insulation
- Safety rating(s): CAT IV 600V, CAT III 1000V, 5A rating
- UL listed
-10%
Close
Fluke Antenna Cable, 16′
Features
- 16’ (5 m) long coaxial cable
- Operation in 2.4 and 5.5 GHz ranges
- Gold-plated screw connectors
Fluke BC500 AC Power Charger
Replacement or AC space charger for Fluke 500 Series Battery Analyzers. Provides power cord operation and charging for Fluke 500
-10%
Close
Fluke BP177X Fluke Li-Ion Battery, 3.56 V, 4000 MAH
Features
- Excellent operating life in a calendar, cycling (≥ 2700 100% DoD cycles), and float charging conditions
- Unrivaled operating temperature range from -40 to 185°F (-40 to +85°C)
- High level of safety, compatible with potentially explosive atmospheres
- Long shelf life with an extremely low capacity loss under storage
- Replacement battery for Fluke 177X products
- Powers the Fluke 177X when not measurement or logging (usually when data is being reviewed)
-10%
Close
Fluke BP500 Li-Ion Battery
Lithium-ion 3000mAh battery for BT500 Series
-11%
Close
Fluke BP881 BNC Male to Double Stacking Banana Plug
Product Features:
- Easily connects DMMs to BNC patch cords
- Allows for hands-free testing in controlled voltage environments 500 VRMS maximum
- Banana plug is nickel-plated, beryllium copper for low contact resistance
- BNC shell is plated for tarnish resistance
- Operating temperature: +50 °C (+122 °F) maximum
- Connects to accessories with male BNC output
-10%
Close
Fluke BP980 Double Banana Plug Kit
- 5 pair (red, black) of double 4 mm banana plugs
- Each plug has 3.1 mm holes for mounting wires and components
- Brass plugs/jack, beryllium copper springs
- 30 V rms or 60 V DC, 15 A
- One year warranty
-10%
Close
Fluke BT521ANG Advanced Battery Analyzer with angled test probes
Features
- Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature
- Sequence measurement mode: Automatic or manual sequence testing of battery strings with automatic measurement storage including voltage, and resistance, eliminating the need to press a button each time a measurement needs to be saved
- Comprehensive logging: All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on the-go analysis
- Optimized user interface: Quick, guided setup ensures you’re capturing the right data every time, and the combined visual and audio feedback cues reduce the risk of measurement confusion
- Threshold comparison: Configure multiple reference values and thresholds for resistance and voltage. Comparison result feedback after each measurement via visual and verbal cues
- Ergonomic test leads: Rugged coaxial two pole kelvin test pins with remote SAVE button reduce test time and increase efficiency
- Intercell strap resistance test and data management: Measures the resistance of the intercell connection between batteries in a string
- Test probe extenders: Long reach, straight and angled probes for double stacked cells
- Intelligent test probe set: Integrated LCD display, infrared temperature measurement, verbal audio feedback and captures voltage readings and temperature logging automatically or via integrated save button
- Enhanced data analysis: Quickly compare trends, analyze results and create reports with included battery management software
- Easy reporting: Generate PDF report on the PC software with analysis graphics and data table or quick email format report with csv file on the mobile app
- Wireless communication: For data download and remote display while measuring. Browse and email measurement data via iOS app
- Battery life: 7.4 V 3000 mAh lithium-ion battery for more than eight hours continuous operation
- USB port: For fast data download to supplied data analysis and report management application software
- Highest safety rating in the industry: CAT III 600 V, 1000 V dc maximum rated for safe measurements all around the battery power supply equipment
-10%
Close
Fluke BTL20 Test Probe Set with Extender
Test Probe Set with Extender. No Temperature Sensor. Fluke BTL20 Test Probe Set with Extender Interactive Battery Analyzer Test Probe
-10%
Close
Fluke BTL20ANG Intelligent Test Probe Set
Key features
- Access to hard-to-reach battery terminals using long or short probe extensions with angled measurement tips
- Optimized handle and cable design so measurement probes won’t get caught or tangled on battery terminals
- CAT II 1000V and CAT III 600V rated
Fluke C101 Hard Carrying Case
Product Features:
- Tough polyprophylene exterior shell
- Diced foam interior
- Exterior dimensions: 12 in. x 14.2 in. x 4.1 in.
- Interior dimensions: 9 in. x 11.5 in. x 2.5 in.
- For use with many Fluke instruments