Fluke 110 True-rms Digital Multimeter
Key features
- True-rms ac voltage for accurate measurements on non-linear signals
- Resistance and continuity
- Large white LED backlight to work in poorly lit areas
Fluke 113 True RMS Utility Multimeter with VCHECK
- VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
- True RMS for accurate AC measurements on non-linear loads
- A large backlit display allows for easy visibility in low-lit areas
- Record signal fluctuations using the Min/Max function
- Diode test for testing general-purpose germanium, silicon, and power diodes
- Integral holster with probe holders for easy storage
- Auto and Manual ranging for added user functionality
- Meets measurement category CAT IV 600 V and Category IV 300 V standards for a higher level of safety
- The optional TPAK magnetic hanger allows the user hands-free flexibility (sold separately)
Fluke 114 True RMS Electrical Multimeter with AutoVolt, 600 V
Product Features:
- True RMS measurements
- AutoVolt technology for automatic AC/DC voltage selection
- Large, white, LED backlit display
- Resistance and continuity
- Min/Max/Average records signal fluctuations
- CAT III 600 V safety rated
Fluke 115 Field Technicians Digital Multimeter
- The compact, general purpose troubleshooting tool for field service technicians
Ideal for general purpose electrical and electronic test requirements, this True RMS digital multimeter also provides simple, one-handed operation and compact design for field service technicians. This tool measures the True RMS voltage as well as currents with 6000 count, resistance, continuity, frequency, and capacitance for quick verifications. Additionally, this digital multimeter is independently tested for safe use in CAT III 600V environments.
Features
- Measures resistance, continuity, frequency, capacitance, and diode test
- Measures 10 A (20 A overload for 30 seconds)
- Large white LED backlight to work in poorly lit areas
- Compact ergonomic design for one-handed operation
- Compatible with optional magnetic hanger (ToolPak™)
- True RMS for accurate measurements on non-linear loads
- Min/max/average with elapsed time to record signal fluctuations
- CAT III 600 V safety rated
- Measures AC and DC voltage to 600 V
Applications
- Electrical and electronic testing
- Quick verification and field service
Fluke 116 Digital HVAC Multimeter
Product Features:
- True RMS measurements
- Built-in thermometer for HVAC applications
- Microamps test flame sensors
- LoZ helps prevent false readings due to ghost voltage
- Large, white, LED backlit display
- Resistance, continuity, frequency and capacitance
- Min/Max/Average with elapsed time records signal fluctuations
- Compact ergonomic design for one-handed operation
- CAT III 600 V safety rated
Fluke 116/62 MAX+ Technician’s Combo Kit
Fluke 116 Offers
Features
- Built-in thermometer
- Provides microamps to test flame sensors
- Low input impedance to helps prevent false readings due to ghost voltage
- Large white LED backlight for working in poorly lit areas
- Measures resistance, continuity, frequency, and capacitance
- Provides Min/Max/Average to record signal fluctuations
- Compact ergonomic design for one-handed operation
- Fits into optional ToolPak™ magnetic hanger for hands-free operation (sold separately)
- CAT III 600 V safety rated
Applications
- HVAC/R
Fluke 62 MAX Plus Infrared Thermometer
Infrared thermometers are everything you’d expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard to reach areas for repair and maintenance.
If you’ve ever used an infrared thermometer, then you may have been fooled regarding the temperature reading. That’s because IR thermometers project a measurement cone at a surface and take the average temperature of the cone at the target. Although most IR thermometers have a laser pointer, a laser is a line, not a cone, and you may think that you’re getting temperature at the laser point only. It uses two rotating laser pointers that show you the size of the measurement area. It covers the temperature range from -22 to 1202°F (-30 to 650°C) with a response time less than 300 ms. The meters screen is located in a position and with a viewing angle (15°) that, in many cases, lets you see the display without having to move the thermometer from the measuring point. For most measurements, you simply pull the trigger once you’ve identified the measurement point.
Features
- Dust and water-resistant: IP54 rated for dust and water resistance
- Drop tested: Rugged enough to survive a 9.8′ (3 m) drop for your most harsh working environments
- Ergonomically designed for a more natural hand fit
- Small and lightweight: It clips to your tool belt or belt loop or easily fits into your tool box
- Distance to spot: Precise laser technology makes for more accurate and repeatable measurements
- Large, backlit display: Large screen makes data easier to read, even in dark areas
- Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements
- Alarm: Hi and Lo alarms for rapid display of measurements outside the limits
- Power: Powered by a single, standard AA battery
Why IR Thermometers?
Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC/R system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.
Applications
- Automotive
- Avionics
- Building automation
- Commercial
- Defence
- Military and aerospace
- HVAC/R
- Industrial
- Lighting
- Maintenance and repair
Fluke TL75 Hard Point™ Test Lead Set
Features
- One pair (red, black) of comfort grip probes
- 48″ (1.22 m) PVC insulated test leads with right-angle shrouded banana plugs
- Recommended for general purpose measurements
- CAT II 1000 V, , 10 A rating
- CAT IV 600 V, CAT III 1000 V only with protective cap
- CSA listed
Fluke 80BK-A Integrated DMM Temperature Probe
Features
- Standard shrouded banana jack
- Convenient one piece construction
Fluke 80AK-A Thermocouple Adapter
Applications
- Low voltage (below 30 V AC, 60 V DC)
Fluke 80PK-11 Type-K Velcro Thermocouple Temperature Probe
Designed to be compatible with any temperature measuring instrument that accepts Type-K thermocouples, has a miniature thermocouple connector, and has cold reference junction compensation. Designed for hands free measurement of HVAC/R temperature measuring applications. Use multiple probes and leave in place for route based routine maintenance.
Facilities Maintenance Challenges and the Fluke Solutions
Facilities maintenance professionals face a wide range of challenges, from electrical and mechanical equipment uptime to overall safety concerns. It’s critical to maintain facilities and the associated assets at peak performance. Let’s review the issues faced by maintenance managers, IT support, and electrical/mechanical technicians. Along with the Fluke solutions that offer to save you time and money while increasing efficiency and safety. Fluke makes reliable, rugged and accurate tools to maintain electromechanical systems, motors, pumps, electrical distribution systems and more to keep your world up and running.
Fluke 117 Electrician’s Multimeter
- VoltAlert™ technology for non-contact voltage detection
- AutoVolt automatic ac/dc voltage selection
- LoZ: helps prevent false readings due to ghost voltage
- Large white LED backlight to work in poorly lit areas
- True-rms for accurate measurements on non-linear loads
- Measures 10 A (20 A overload for 30 seconds)
- Resistance, continuity, frequency and capacitance
- Min/max/average to record signal fluctuations
- Compatible with optional magnetic hanger (ToolPak™) for hands free operation
- Accurate and easy-to-use
- Provides low input impedance to help prevent false readings due to ghost voltage
- CAT III 600 V safety rated
Fluke 117/323 Electrician’s Combo Kit
Features
- Fluke 117 electrician’s multimeter
- VoltAlert™ technology for non-contact voltage detection.
- AutoVolt automatic ac/dc voltage selection.
- Low input impedance: Helps prevent false readings due to ghost voltage.
- Large white LED backlight to work in poorly lit areas.
- True-rms for accurate measurements on non-linear loads.
- Measures 10 A (20 A overload for 30-seconds).
- Resistance, continuity, frequency and capacitance.
- Min/Max/Average to record signal fluctuations.
- Compact ergonomic design for one-handed operation.
- CAT III 600 V safety rated.
- Fluke 323 clamp meter
- 400 A ac current measurement.
- 600 V ac and dc voltage measurement.
- True-rms ac voltage and current for accurate measurements on non-linear signals.
- Resistance measurement up to 40 kΩ with continuity detection.
- Slim, ergonomic design.
- CAT IV 300V/CAT III 600 V safety rating.
Fluke 1577 Insulation Multimeter
- Insulation test voltages 500 V, 1000 V
- Insulation test: 0.1 MΩ to 600 MΩ
- Auto discharge of capacitive voltage
- AC/DC Voltage
- DC millivolts
-10%
Close
Fluke 1587 FC Advanced Electrical Troubleshooting Kit
Features 1587FC
- PI/DAR timed ratio tests
- Live circuit detection prevents insulation test if voltage >30 V is detected for added user protection
- VFD low-pass filter for accurate motor drive measurements
- Auto-discharge of capacitive voltage for added user protection
- Insulation test of 0.01 MΩ to 2 GΩ
- Insulation test voltages of 50, 100, 250, 500 V for many applications
- AC/DC voltage, DC millivolts, AC/DC milliamps, resistance (Ω), continuity
- Capacitance, diode test, temperature, Min/Max, frequency (Hz)
- Auto power off to save battery power
- CAT III 1000 V, CAT IV 600 V measurement category
- Large display with backlight
- Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely
- Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone
- Quickly find problems by saving and comparing measurements over time on a wireless device
Features Fluke i400 Current Clamp
- Use with your Fluke 1587 to measure 1A AC to 400 A AC
- 1 mA/Amp output guarantees easy reading
- CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection
- Specially designed to offer maximum utility in a very compact shape
- Maximum conductor: 32 mm
- Complete specifications
Features Fluke 62max+ Mini IR Thermometer
- Quick and reliable surface temperature readings (non-contact)
- Best accuracy in its class : + 1 % of reading or +1 °C (+2 °F)
- Wide temperature range: -30° to 650 °C (-22 ° to 1202 °F)
- Dual displays shows current and max measurements simultaneously
- Holds temperature readings for 7 seconds
Fluke 1587 FC Insulation Multimeter
- Provides memory storage through Fluke Connect Measurements to eliminate the need to write down results
- Includes live circuit detection to prevent insulation test if voltage >30 V is detected
- Provides automated temperature compensation to establish accurate baselines
- Supports historical tracking and asset trending of assets to identify degradation over time with Fluke Connect® Assets (sold separately)
- Incorporates VFD low-pass filter for accurate variable frequency motor drive measurements
- Includes auto-discharge of capacitive voltage for added user protection
- Measures ac/dc voltage, dc millivolts, ac/dc milliamps, resistance, and continuity
- Includes capacitance, diode test, temperature, min/max, frequency measurements and insulation test smoothing reading
- Automatically powers off to save battery power
- Comes with remote probe, test leads, alligator clips, K-type thermocouple, hard case, and three-year warranty.
Fluke 1587 T Insulation Multimeter
Fluke 1587 T Offers
Features
- Large display with backlight
- Insulation test: 0.01 Mohm to 2 Gohm
- Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
- Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
- Auto-discharge of capacitive voltage for added user protection
- AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (ohm), Continuity
- Filter for motor drive measurements
- Capacitance, diode test, temperature, Min/Max, frequency (Hz)
- Auto power off to save battery power
- CAT III 1000 V, CAT IV 600 V measurement category
- Accepts optional Fluke TPAK™ magnetic hanging system to free your hands for other work
- Rugged, utility hard case allows you to bring everything you need for the job
- Three year warranty
Fluke 175 True-RMS Digital Multimeter
- Safety rated CAT III 1000 V, CAT IV 600 V
- Comes with a lifetime warranty
- Allows closed-case calibration through front panel
- Includes ergonomic case with integrated protective holster
Fluke 177 True RMS Digital Multimeter with backlight
- Features digital display with backlight for working in dim lighting
- Allows closed case calibration through front panel
- Features an ergonomic case with integrated protective holster
- Comes with a limited lifetime warranty
Fluke 179 True RMS Digital Multimeter with built-in thermometer
- Wide 1000 V measurement range
- True-rms for precise measurement of non linear signals
- Capacitance, resistance, continuity and frequency
- Built-in thermometer (179)
- Large, easy-to-read display
- Backlight for work in dim areas (177, 179)
- Min/Max to record signal fluctuations
- Free your hands with the optional TPAK magnetic hanger
Fluke 179/EDA2 True RMS Digital Multimeter and Deluxe Accessory Combo Kit
Features 179
- A full-featured, precision multimeter for troubleshooting electrical and electronic systems
- Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
- Includes a built-in thermometer to measure temperature without having to carry a separate instrument
- Allows closed-case calibration through front panel
- Safety rated CAT III 1000 V, CAT IV 600 V
Features AC280
- One pair (red, black) of nickel plated clips
- (Profile narrows to 0.22″ (5.6 mm) at tip, hook opening 0.25″ (6.4 mm) at front, 0.08″ (2 mm) at base
- CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed
Features TL224
- DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
- Right angle connector on one end and straight connector on the other
- Reinforced strain relief
- 4.9′ (1.5 m) silicone-insulated wire resists heat and cold
- CAT IV 600 V, CAT III 1000 V, 10 A rating, UL listed
Features TPAK
- Powerful magnetic hanger allows you to hang your meter on any metallic surfaces
- 9″ (229 mm) hook and loop strap allows you to loop around pipes
- Hook hanger for hanging on non-magnetic surfaces
- General purpose hanger allows you to hang your meter on nails, hooks and many other objects
- Compatible with many Fluke instruments
Features 80BK-A
- Type-K thermocouple with standard shrouded banana jack
- Convenient one piece construction
- Compatible with DMMs with temperature measurement functions
- 3.3′ (1 m) lead
Features TL910
- Very small 1 mm tips to access hard to reach test points
- Probe tip length up to 100 mm, test lead length: 1 m
- CAT IV 600 V, CAT III 1000 V, 3 A rating
Features C35
- Durable polyester 600D case construction for long life
- Case top opens laterally to allow use of test tool without removing it from the case and includes a strap to secure the test tool
- Compatible with 20, 70, 11X, 170 Series digital multimeters and other similar format test tools
Fluke 233 Remote Display Digital Multimeter
- True-rms AC voltage and current for accurate measurements on non-linear signals
- Measure up to 1000 V AC and DC
- Measure up to 10 A (20 A for 30 seconds)
- 10,000 µF capacitance range
- Frequency to 50 kHz
- Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Resistance, continuity and diode test
- Low power wireless technology allows the display to be carried up to 33′ (10 m) away from the point of measurement for added flexibility
- No interference with measurements
- The removable magnetic display can be conveniently mounted where it is easily seen
- Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
- Use as a conventional multimeter when the display is connected
- Radio transmitter automatically turns off when the display is connected to the meter
- Auto power off maximizes battery life
- Min/max and average recording to capture variations automatically
- Easy to read display with large digits and bright backlight
- Battery life approximately 400 hours
Close
Fluke 2638A Hydra Series III Data Acquisition System/Digital Multimeter
- DC accuracy of 0.0024 %
- Thermocouple accuracy of 0.5 °C
- Up to 66 universal differential isolated inputs
- On-screen color trend graphing of up to four channels at a time
- Easy-to-use menu system for setup and data management
- Input types: ac V, dc V, ac I, dc I, thermocouple, PRT (2, 3, 4 w), thermistor, resistance (2-4 w), frequency
- Multi-channel real-time data display
- 6.5-digit bench DMM function for front-panel inputs
- Monitor function for real-time viewing and charting between scans
- 20 on-board math channels
- One-button screen capture of chart or data displays
- 45 channels/second basic dc scan rate
- Internal 57,000 scan/setup file memory
- USB flash drive support
- Data security features
- 300 V CAT II input safety rated
- Supported by TQSoft and TQAero thermal validation software for FDA 21 CFR Part 11 and AMS 2750 compliant data collection
Fluke 27 II Rugged Digital Multimeter
- Measure up to 1000 V ac and dc
- Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
- Frequency to 200 kHz
- Extended ac voltage bandwidth – 40 Hz to 30 kHz
- Resistance, continuity and diode test
- Min/Max and average recording to capture variations automatically
- IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
- Designed to withstand 3 meter drop (with holster)
-10%
Close
Fluke 279FC I/B Wireless True RMS Thermal Multimeter with iFlex and extra battery
Product Features:
- True RMS measurements
- Built-in Fluke Connect button
- Fully-featured multimeter with built-in thermal imager
- 15 measurement functions including AC voltage with low-pass filter, DC voltage, resistance, continuity, capacitance, diode test, Min/Max/Avg, AC current (with iFlex), frequency
- Thermal imaging reveals many electrical issues quickly and safely, eliminating need for time-consuming testing and validation
- Two-in-one tool designed to increase productivity
- iFlex expands measurement capabilities
- Get into tight, hard-to-reach spaces for current measurement (up to 2500 A AC)
- Designed to withstand 3 m (9.8 ft) drop
- Double insulated with raised rubber holster for increased protection
- Save measurements and images while communicating wirelessly with smart phone up to 20 feet (6.1 m) away (without obstructions)
- Image resolution 80 x 60
- 3.5 in. (8.89cm) color LCD screen
- Rechargeable lithium ion battery allows for full work day (10+ hours, under normal conditions)
- Auto power off saves battery life
- CAT III 1000 V, CAT IV 600 V measurement category
Applications
- Industrial electricians
- Facilities maintenance
- Field service
- General purpose electrical maintenance
- Preventive and predictive maintenance
- Troubleshooting
Fluke Connect Mobile App
- AutoRecord measurements: Take measurements automatically and instantly save them to your phone; wirelessly save measurements to Fluke Cloud and add text or audio annotations
- TrendIt graphs: Trend measurements from a single session in a time series graph
- ShareLive video call: View live tool measurements, video and audio to collaborate in real time with your entire team, without leaving the field
- Fluke Cloud storage: Securely store up to 5 GB of data securely, per user
- Reports: Create reports with accurate and traceable maintenance data
Fluke 279FC Wireless TRMS Thermal Multimeter
- Full-featured multimeter with built-in thermal imager
- 15 measurement functions including: AC voltage with low-pass filter, DC voltage, Resistance, Continuity, Capacitance, Diode test, Min/Max/Avg, AC current (with iFlex), Frequency
- Thermal imaging reveals many electrical issues quickly and safely, eliminating the need for time-consuming testing and validation
- Two-in-one tool is designed to increase productivity– no need to go back to the truck or office to retrieve a shared camera or wait for the thermographer do more in less time!
- Designed for durability, built to withstand a 3 m (9.8Ft) drop, double insulated with raised rubber holster for increased protection
- Save measurements and images while communicating wirelessly with a smart phone up to 20 feet/6.1 m away (no obstructions)
- Image resolution–80 x 60
- 3.5″/8.89 cm color LCD screen
- Rechargeable lithium ion battery allows for a for a full work day (10+ hours) under normal conditions
- Assembled in the USA
- Three year standard warranty
- Auto power off to save battery power
- CAT III 1000 V, CAT IV 600 V measurement category
Fluke 28 II Rugged Digital Multimeter
- Measure up to 1000 V AC and DC
- Measure up to 10 A (20 A for 30 seconds)
- 10,000 μF capacitance range
- Frequency to 200 kHz
- Extended AC voltage bandwidth– 15 Hz to 20 kHz
- Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Resistance, continuity and diode test
- Min/Max and average recording to capture variations automatically
- Peak min-max
- Hi resolution 20,000 count display mode
- True-rms ac voltage and current for accurate measurements on non linear signals
- Backlit keypad buttons allow for easy visibility in low-lit areas
- Large display digits and 2 level bright white backlight for increased visibility
- Reversible holster for added protection when not in use
-10%
Close
Fluke 28-II TRMS Industrial Multimeter with IP67 Rating
Features:
- Measure up to 1000 V ac and dc
- Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
- Frequency to 200 kHz
- Extended ac voltage bandwidth – 40 Hz to 30 kHz
- Resistance, continuity and diode test
- Min/Max and average recording to capture variations automatically
- Peak min-max
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
- Designed to withstand 3 meter drop (with holster)
- True-rms ac voltage and current for accurate measurements on non-linear loads
- Hi resolution 20,000 count display mode
- Backlit keypad buttons allow for easy visibility in lowlit areas
- Large display digits and 2 level bright white backlight for increased visibility
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
- Long battery life (800 hours)
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
- MSHA approval (pending)
-10%
Close
FLUKE 287 NUC TRUE-RMS ELECTRONICS LOGGING MULTIMETER
Key features
- Now compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional ir3000 FC infrared connector (sold separately).
- Let your team see what you see in an instant with ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).
- TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred.
- Limited lifetime warranty.
