-10%
Close
Fluke 1587 FC Advanced Electrical Troubleshooting Kit
Features 1587FC
- PI/DAR timed ratio tests
- Live circuit detection prevents insulation test if voltage >30 V is detected for added user protection
- VFD low-pass filter for accurate motor drive measurements
- Auto-discharge of capacitive voltage for added user protection
- Insulation test of 0.01 MΩ to 2 GΩ
- Insulation test voltages of 50, 100, 250, 500 V for many applications
- AC/DC voltage, DC millivolts, AC/DC milliamps, resistance (Ω), continuity
- Capacitance, diode test, temperature, Min/Max, frequency (Hz)
- Auto power off to save battery power
- CAT III 1000 V, CAT IV 600 V measurement category
- Large display with backlight
- Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely
- Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone
- Quickly find problems by saving and comparing measurements over time on a wireless device
Features Fluke i400 Current Clamp
- Use with your Fluke 1587 to measure 1A AC to 400 A AC
- 1 mA/Amp output guarantees easy reading
- CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection
- Specially designed to offer maximum utility in a very compact shape
- Maximum conductor: 32 mm
- Complete specifications
Features Fluke 62max+ Mini IR Thermometer
- Quick and reliable surface temperature readings (non-contact)
- Best accuracy in its class : + 1 % of reading or +1 °C (+2 °F)
- Wide temperature range: -30° to 650 °C (-22 ° to 1202 °F)
- Dual displays shows current and max measurements simultaneously
- Holds temperature readings for 7 seconds
Fluke 1587 FC Insulation Multimeter
- Provides memory storage through Fluke Connect Measurements to eliminate the need to write down results
- Includes live circuit detection to prevent insulation test if voltage >30 V is detected
- Provides automated temperature compensation to establish accurate baselines
- Supports historical tracking and asset trending of assets to identify degradation over time with Fluke Connect® Assets (sold separately)
- Incorporates VFD low-pass filter for accurate variable frequency motor drive measurements
- Includes auto-discharge of capacitive voltage for added user protection
- Measures ac/dc voltage, dc millivolts, ac/dc milliamps, resistance, and continuity
- Includes capacitance, diode test, temperature, min/max, frequency measurements and insulation test smoothing reading
- Automatically powers off to save battery power
- Comes with remote probe, test leads, alligator clips, K-type thermocouple, hard case, and three-year warranty.
Fluke 1587 T Insulation Multimeter
Fluke 1587 T Offers
Features
- Large display with backlight
- Insulation test: 0.01 Mohm to 2 Gohm
- Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
- Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
- Auto-discharge of capacitive voltage for added user protection
- AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (ohm), Continuity
- Filter for motor drive measurements
- Capacitance, diode test, temperature, Min/Max, frequency (Hz)
- Auto power off to save battery power
- CAT III 1000 V, CAT IV 600 V measurement category
- Accepts optional Fluke TPAK™ magnetic hanging system to free your hands for other work
- Rugged, utility hard case allows you to bring everything you need for the job
- Three year warranty
Fluke 175 True-RMS Digital Multimeter
- Safety rated CAT III 1000 V, CAT IV 600 V
- Comes with a lifetime warranty
- Allows closed-case calibration through front panel
- Includes ergonomic case with integrated protective holster
Fluke 177 True RMS Digital Multimeter with backlight
- Features digital display with backlight for working in dim lighting
- Allows closed case calibration through front panel
- Features an ergonomic case with integrated protective holster
- Comes with a limited lifetime warranty
Fluke 179 True RMS Digital Multimeter with built-in thermometer
- Wide 1000 V measurement range
- True-rms for precise measurement of non linear signals
- Capacitance, resistance, continuity and frequency
- Built-in thermometer (179)
- Large, easy-to-read display
- Backlight for work in dim areas (177, 179)
- Min/Max to record signal fluctuations
- Free your hands with the optional TPAK magnetic hanger
Fluke 179/EDA2 True RMS Digital Multimeter and Deluxe Accessory Combo Kit
Features 179
- A full-featured, precision multimeter for troubleshooting electrical and electronic systems
- Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
- Includes a built-in thermometer to measure temperature without having to carry a separate instrument
- Allows closed-case calibration through front panel
- Safety rated CAT III 1000 V, CAT IV 600 V
Features AC280
- One pair (red, black) of nickel plated clips
- (Profile narrows to 0.22″ (5.6 mm) at tip, hook opening 0.25″ (6.4 mm) at front, 0.08″ (2 mm) at base
- CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed
Features TL224
- DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
- Right angle connector on one end and straight connector on the other
- Reinforced strain relief
- 4.9′ (1.5 m) silicone-insulated wire resists heat and cold
- CAT IV 600 V, CAT III 1000 V, 10 A rating, UL listed
Features TPAK
- Powerful magnetic hanger allows you to hang your meter on any metallic surfaces
- 9″ (229 mm) hook and loop strap allows you to loop around pipes
- Hook hanger for hanging on non-magnetic surfaces
- General purpose hanger allows you to hang your meter on nails, hooks and many other objects
- Compatible with many Fluke instruments
Features 80BK-A
- Type-K thermocouple with standard shrouded banana jack
- Convenient one piece construction
- Compatible with DMMs with temperature measurement functions
- 3.3′ (1 m) lead
Features TL910
- Very small 1 mm tips to access hard to reach test points
- Probe tip length up to 100 mm, test lead length: 1 m
- CAT IV 600 V, CAT III 1000 V, 3 A rating
Features C35
- Durable polyester 600D case construction for long life
- Case top opens laterally to allow use of test tool without removing it from the case and includes a strap to secure the test tool
- Compatible with 20, 70, 11X, 170 Series digital multimeters and other similar format test tools
Fluke 233 Remote Display Digital Multimeter
- True-rms AC voltage and current for accurate measurements on non-linear signals
- Measure up to 1000 V AC and DC
- Measure up to 10 A (20 A for 30 seconds)
- 10,000 µF capacitance range
- Frequency to 50 kHz
- Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Resistance, continuity and diode test
- Low power wireless technology allows the display to be carried up to 33′ (10 m) away from the point of measurement for added flexibility
- No interference with measurements
- The removable magnetic display can be conveniently mounted where it is easily seen
- Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
- Use as a conventional multimeter when the display is connected
- Radio transmitter automatically turns off when the display is connected to the meter
- Auto power off maximizes battery life
- Min/max and average recording to capture variations automatically
- Easy to read display with large digits and bright backlight
- Battery life approximately 400 hours
Fluke 2638A Hydra Series III Data Acquisition System/Digital Multimeter
- DC accuracy of 0.0024 %
- Thermocouple accuracy of 0.5 °C
- Up to 66 universal differential isolated inputs
- On-screen color trend graphing of up to four channels at a time
- Easy-to-use menu system for setup and data management
- Input types: ac V, dc V, ac I, dc I, thermocouple, PRT (2, 3, 4 w), thermistor, resistance (2-4 w), frequency
- Multi-channel real-time data display
- 6.5-digit bench DMM function for front-panel inputs
- Monitor function for real-time viewing and charting between scans
- 20 on-board math channels
- One-button screen capture of chart or data displays
- 45 channels/second basic dc scan rate
- Internal 57,000 scan/setup file memory
- USB flash drive support
- Data security features
- 300 V CAT II input safety rated
- Supported by TQSoft and TQAero thermal validation software for FDA 21 CFR Part 11 and AMS 2750 compliant data collection