Showing all 13 results

Show sidebar
-10%
Close

Fluke 123B Industrial ScopeMeter® Hand-Held Oscilloscope, 20 MHz

$2,642.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-10%
Close

Fluke 123B/S Industrial ScopeMeter Hand-Held Oscilloscope with the Fluke Vie software, 20 MHz

$2,724.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz or 20 MHz oscilloscope bandwidth
  • Two 5000-count true-rms digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-10%
Close

Fluke 124B ScopeMeter Oscilloscope

$3,078.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 or 40MHz bandwidth
    • 5mV to 200V/div sensitivity
  • VDC and true-rms VAC ranges from 500mV to 750V
    • 5000 count full scale reading
  • Up to 2200V peak (max, min, & peak-to-peak modes)
    • 5% FS accuracy (min or max), 10% (peak-to-peak)
    • 500 counts full scale reading
  • Up to 70MHz frequency for 124B & 125B
    • Up to 50MHz for 123B
  • Measure resistance, continuity, diode, & capacitance
  • CE & CSA approved, CAT IV 600V safety rated
-10%
Close

Fluke 124B/S Industrial ScopeMeter Hand-Held Oscilloscope with the Fluke View software, 40 MHz

$4,033.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-10%
Close

Fluke 125B ScopeMeter Oscilloscope

$3,716.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 or 40MHz bandwidth
    • 5mV to 200V/div sensitivity
  • VDC and true-rms VAC ranges from 500mV to 750V
    • 5000 count full scale reading
  • Up to 2200V peak (max, min, & peak-to-peak modes)
    • 5% FS accuracy (min or max), 10% (peak-to-peak)
    • 500 counts full scale reading
  • Up to 70MHz frequency for 124B & 125B
    • Up to 50MHz for 123B
  • Measure resistance, continuity, diode, & capacitance
  • CE & CSA approved, CAT IV 600V safety rated
-10%
Close

Fluke 125B/S Industrial ScopeMeter Hand-Held Oscilloscope with FlukeView software, 40 MHz

$4,760.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-6%
Close

Fluke 190 Series II 100MHz 2 Channel ScopeMeter Oscilloscope

$5,826.00
Excluding GST 10%
  • IEC 61010 1000V CAT III / 600V CAT IV Safety rating
  • 2 fully isolated floating input channels with up to 1.25 GS/s real time sampling rate
  • 8ns Glitch detect
  • 10,000 sample deep memory per channel for displaying high resolution waveform details
  • 2 input channels provide: 2 meter measurements, 2 TrendPlot traces, 2 ScopeRecord traces, capturing or logging 2 inputs over time
  • Live Zoom with full resolution
-6%
Close

Fluke 190 Series II 100MHz 4 Channel ScopeMeter Oscilloscope

$6,719.00
Excluding GST 10%

Features

  • Four independent isolated input channels
  • 60, 100, 200 and 500 MHz bandwidths
  • Sample rate: Up to 2.5 GS/s
  • Sample rate resolution: Up to 400 ps
  • Deep memory: 10,000 point per trace waveform capture
  • CAT III 1000 V / CAT IV 600 V safety rating
  • Seven hour, high performance Li-ion batteries
  • Battery door for convenient battery access
  • Isolated USB ports for memory devices and PC connectivity
Close

Fluke 190 Series II 200MHz 2 Channel ScopeMeter Oscilloscope

$6,506.00
Excluding GST 10%

Features

  • Four independent isolated input channels
  • 60, 100, 200 and 500 MHz bandwidths
  • Sample rate: Up to 2.5 GS/s
  • Sample rate resolution: Up to 400 ps
  • Deep memory: 10,000 point per trace waveform capture
  • CAT III 1000 V / CAT IV 600 V safety rating
  • Seven hour, high performance Li-ion batteries
  • Battery door for convenient battery access
  • Isolated USB ports for memory devices and PC connectivity
Close

Fluke 190 Series II 200MHz 4 Channel ScopeMeter Oscilloscope

$7,486.00
Excluding GST 10%

Features

  • Four independent isolated input channels
  • 60, 100, 200 and 500 MHz bandwidths
  • Sample rate: Up to 2.5 GS/s
  • Sample rate resolution: Up to 400 ps
  • Deep memory: 10,000 point per trace waveform capture
  • CAT III 1000 V / CAT IV 600 V safety rating
  • Seven hour, high performance Li-ion batteries
  • Battery door for convenient battery access
  • Isolated USB ports for memory devices and PC connectivity
Close

Fluke 190 Series II 500MHz 2 Channel ScopeMeter Oscilloscope

$7,486.00
Excluding GST 10%

Features

  • Four independent isolated input channels
  • 60, 100, 200 and 500 MHz bandwidths
  • Sample rate: Up to 2.5 GS/s
  • Sample rate resolution: Up to 400 ps
  • Deep memory: 10,000 point per trace waveform capture
  • CAT III 1000 V / CAT IV 600 V safety rating
  • Seven hour, high performance Li-ion batteries
  • Battery door for convenient battery access
  • Isolated USB ports for memory devices and PC connectivity
Close

Fluke 190 Series II 500MHz 4 Channel ScopeMeter Oscilloscope

$8,511.00
Excluding GST 10%

Features

  • Four independent isolated input channels
  • 60, 100, 200 and 500 MHz bandwidths
  • Sample rate: Up to 2.5 GS/s
  • Sample rate resolution: Up to 400 ps
  • Deep memory: 10,000 point per trace waveform capture
  • CAT III 1000 V / CAT IV 600 V safety rating
  • Seven hour, high performance Li-ion batteries
  • Battery door for convenient battery access
  • Isolated USB ports for memory devices and PC connectivity
-7%
Close

Fluke 190 Series II 60MHz ScopeMeter Oscilloscope

$5,120.00
Excluding GST 10%

Features

  • Four independent isolated input channels
  • 60, 100, 200 and 500 MHz bandwidths
  • Sample rate: Up to 2.5 GS/s
  • Sample rate resolution: Up to 400 ps
  • Deep memory: 10,000 point per trace waveform capture
  • CAT III 1000 V / CAT IV 600 V safety rating
  • Seven hour, high performance Li-ion batteries
  • Battery door for convenient battery access
  • Isolated USB ports for memory devices and PC connectivity