-10%
Close
Fluke 1586-2586/C High-Capacity Module without Relay Card, Accredited Calibration
What’s included with the Fluke 1586-2586/C
- Fluke 1586-2586/C High-Capacity Module without Relay Card, Accredited Calibration
-10%
Close
Fluke 1586-2588 DAQ-STAQ Multiplexer without Adapter Card for 1586A Series
What’s included with the Fluke 1586-2588
- Fluke 1586-2588 DAQ-STAQ Multiplexer without Adapter Card for 1586A Series
-10%
Close
Fluke 1586-2588-ADP Relay Card for DAQ-STAQ Multiplexers
What’s included with the Fluke 1586-2588-ADP
- Fluke 1586-2588-ADP Relay Card for DAQ-STAQ Multiplexers
-10%
Close
Fluke 1586-2588-KIT DAQ-STAQ Mutiplexer with Adapter Card and Interface Cable
Designed for use in secondary temperature calibration labs to achieve high-accuracy measurements, this multiplexer comes with an adapter card and
-10%
Close
Fluke 1586-2588-KIT/C DAQ-STAQ Multiplexer with Adapter Card and Interface Cable, Accredited Calibration
With an adapter card and interface cable included, this accredited-calibration multiplexer can be easily connected or disconnected to thermocouples, Platinum
-10%
Close
Fluke 1586-2588/C DAQ-STAQ Multiplexer without Adapter Card for 1586A Series, Accredited Calibration
Featuring accredited calibration, but without an adapter card, this multiplexer is compatible with the 1586A Series. What’s included with the
-10%
Close
Fluke 1586-CASE Carrying Case for 1586 Super-DAQ Precision Temperature Scanners
Features
- Holds mainframe and internal modules
- Ultra-high-impact structural copolymer shell for strength and durability
- Unbreakable
- Watertight, airtight, dustproof
- Chemical resistant, corrosion proof
- Automatic purge valve for quick equalization after changes in atmospheric pressure
- Interior dimensions: 18.43 x 14 x 7.62in (46.8 x 35.5 x 19.3cm)
- Exterior dimensions: 20.62 x 16.87 x 8.12in (52.4 x 42.8 x 20.6cm)
-10%
Close
Fluke 1586/DS-CASE Super-DAQ/DAQ-STAQ Carrying Case for 1586A Super-DAQ Precision Temperature Scanners
Put your existing 1586A Super-DAQ precision temperature scanner in this carrying case to help keep it safe. The case is
-10%
Close
Fluke 1587 FC Advanced Electrical Troubleshooting Kit
Features 1587FC
- PI/DAR timed ratio tests
- Live circuit detection prevents insulation test if voltage >30 V is detected for added user protection
- VFD low-pass filter for accurate motor drive measurements
- Auto-discharge of capacitive voltage for added user protection
- Insulation test of 0.01 MΩ to 2 GΩ
- Insulation test voltages of 50, 100, 250, 500 V for many applications
- AC/DC voltage, DC millivolts, AC/DC milliamps, resistance (Ω), continuity
- Capacitance, diode test, temperature, Min/Max, frequency (Hz)
- Auto power off to save battery power
- CAT III 1000 V, CAT IV 600 V measurement category
- Large display with backlight
- Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely
- Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone
- Quickly find problems by saving and comparing measurements over time on a wireless device
Features Fluke i400 Current Clamp
- Use with your Fluke 1587 to measure 1A AC to 400 A AC
- 1 mA/Amp output guarantees easy reading
- CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection
- Specially designed to offer maximum utility in a very compact shape
- Maximum conductor: 32 mm
- Complete specifications
Features Fluke 62max+ Mini IR Thermometer
- Quick and reliable surface temperature readings (non-contact)
- Best accuracy in its class : + 1 % of reading or +1 °C (+2 °F)
- Wide temperature range: -30° to 650 °C (-22 ° to 1202 °F)
- Dual displays shows current and max measurements simultaneously
- Holds temperature readings for 7 seconds
Fluke 1587 FC Insulation Multimeter
- Provides memory storage through Fluke Connect Measurements to eliminate the need to write down results
- Includes live circuit detection to prevent insulation test if voltage >30 V is detected
- Provides automated temperature compensation to establish accurate baselines
- Supports historical tracking and asset trending of assets to identify degradation over time with Fluke Connect® Assets (sold separately)
- Incorporates VFD low-pass filter for accurate variable frequency motor drive measurements
- Includes auto-discharge of capacitive voltage for added user protection
- Measures ac/dc voltage, dc millivolts, ac/dc milliamps, resistance, and continuity
- Includes capacitance, diode test, temperature, min/max, frequency measurements and insulation test smoothing reading
- Automatically powers off to save battery power
- Comes with remote probe, test leads, alligator clips, K-type thermocouple, hard case, and three-year warranty.
Fluke 1587 T Insulation Multimeter
Fluke 1587 T Offers
Features
- Large display with backlight
- Insulation test: 0.01 Mohm to 2 Gohm
- Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
- Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
- Auto-discharge of capacitive voltage for added user protection
- AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (ohm), Continuity
- Filter for motor drive measurements
- Capacitance, diode test, temperature, Min/Max, frequency (Hz)
- Auto power off to save battery power
- CAT III 1000 V, CAT IV 600 V measurement category
- Accepts optional Fluke TPAK™ magnetic hanging system to free your hands for other work
- Rugged, utility hard case allows you to bring everything you need for the job
- Three year warranty
Fluke 1587/MDT FC Advanced Motor & Drive Troubleshooting Kit
Features
- Fluke 1587 FC
- Insulation Test Voltages: 50V, 100V, 250V, 500V, 1000V
- Insulation Test: 0.01 MΩ to 2.0GΩ
- AC/DC voltage
- DC millivolts
- Insulation test smoothing reading
- Frequency measurement
- Capacitance measurement
- Diode test
- Temperature measurement
- CAT III 1000V, CAT IV 600V measurement category
- Fluke i400 Clamp Meter
- Measures up to 400A AC
- 1 – 400A continuous current range
- 2% + 0.06A basic accuracy
- 1mA / amp output
- CAT IV 600V / CAT III 1000V Safety rating
- Max. conductor 32mm diameter
- Fluke 9040 Phase Rotation Indicator
- 3 phase indication
- Indication of phase rotation
- 40-700 V voltage range
- 15-400 Hz frequency range
- Clear LCD display
- Continuous operating timer
- IP40 dust/water resistance
- CAT III 600 V overvoltage rating
- No battery required
-10%
Close
Fluke 1587FC Insulation Multimeter
Fluke 1587 FC Offers
- PI/DAR timed ratio tests (1587 FC only)
- Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
- VFD low-pass filter for accurate motor drive measurements (1587 FC only)
- Auto-discharge of capacitive voltage for added user protection
- Insulation test (1587 FC: 0.01 MΩ to 2 GΩ) (1577: 0.1 MΩ to 600 MΩ)
- Insulation test voltages (1587 FC: 50 V, 100 V, 250 V, 500 V, 1000 V),(1577: 500 V, 1000 V) for many applications
- AC/DC voltage, DC millivolts, AC/DC milliamps, Resistance (Ω), Continuity
- Capacitance, diode test, temperature, Min/Max, frequency (Hz)(1587 FC only)
- Auto power off to save battery power
- CAT III 1000 V, CAT IV 600 V measurement category
- Rugged, utility hard case allows you to bring everything you need for the job
- Large display with backlight
Fluke 1623-2 Earth Ground Resistance Meter
- Adjustable stroke length can be set to limit the pressure per stroke
- 1/4 in NPT male to 1/4 in BSP female
- 1 meter of hose
- (2) 1/8 in NPT male quick connects
- 1/8 NPT female to 1/4 in BSP female
- Seal Kit
- Instruction sheet
Fluke 1623-2-KIT Basic Geo Earth Ground Tester Kit
Features
- One-button measurement concept
- 3- and 4-pole earth ground measurement
- 4-pole soil resistivity testing
- Selective testing, no disconnection of ground conductor (one clamp)
- Stakeless testing, quick ground loop testing (two clamps)
- Measuring frequency 128 Hz
Fluke 1625-2 GEO Earth Ground Tester
- Provides R* measurement that calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see
- Includes USB port for data storage and transfer
- Features IP56 rating for outdoor use
- Offers adjustable limits for quicker testing
- Comes with a rugged carrying case
Fluke 1625-2-KIT Advanced Geo Earth Ground Tester Kit
Features
- One-button measurement concept
- 3- and 4-pole earth ground measurement
- 4-pole soil resistivity testing
- Selective testing, no disconnection of ground conductor (1 clamp)
- Stakeless testing, quick ground loop testing (2 clamps)
- Measuring frequency 128 Hz
Fluke 1630-2 FC Earth Ground Clamp
- AC leakage current measurement – identify ac leakage currents without disconnecting the earth ground stake from the grounding system – ideal for system troubleshooting
- Rugged – heavy-duty clamp jaw stays in alignment and in calibration even in every day, on the job industrial environments
- Logging measurements – the earth ground clamp saves time by automatically recording data at pre-set intervals and saves up to 32,760 measurements in memory at the set logging interval
- Alarm threshold – user-defined high/low alarm limits, for rapid measurement evaluation
- Band-pass filter – selectable band-pass filter function removes unwanted noise from the ac leakage current measurement
- Fluke Connect compatible
Fluke 1662 – Multifunction Electrical Tester
A solid, reliable, basic installation tester
- Tests voltage and frequency
- Checks wiring polarity to detect broken N wires
- Measures insulation resistance and loop and line resistance
- Measures motor windings with continuity test
- Calculates prospective earth fault current (PEFC/IK) and prospective short-circuit current (PSC/IK)
Close
Fluke 1663 Multifunction Installation Tester
Features
- 500V AC/DC voltage measurement TRMS
- 0.1V resolution & 3.3MΩ input impedance
- 660V RMS overload protection
- 20, 200, & 2000Ω auto-ranging continuity test
- 0.01, 0.1, & 1Ω resolution
- >4V open circuit voltage
- L-N, L-PE, N-PE inputs
- 50, 100, 250, 500, & 1000V insulation test voltages
- Test smooth DC sensitive RCDs (Type B/B+)
- 200 & 2000Ω earth resistance test
- 0.1 & 1Ω resolution
- 125Hz frequency & 25V output voltage
- On/Off switchable auto-start for RCD & Looptest
- Time & date (with optional FlukeView software)
- IP40 rated housing
- Complies with IEC/EN, UL, ANSI/ISA, & CAN/CSA
-10%
Close
Fluke 1663/FVF AU Installation Tester W/Rcd Type B & Flukeview Forms Au
Fluke Flk-1663/Fvf Au Installation Tester W/Rcd Type B & Flukeview Forms Au Measurement Functions
- Continuity at L-N, L-PE & N-PE inputs
- Test smooth dc sensitive RCDs (Type B)
- Earth resistance
- Voltage & frequency
- Wiring polarity checker, detects broken PE and N wires
- Insulation resistance
- Continuity & resistance
- Measure motor windings with continuity test
- Loop & line resistance
- Prospective earth fault current (PEFC/IK)
- Prospective short circuit current (PSC/IK)
- RCD switching time
- RCD tripping level (ramp test)
- Measures trip time & current for RCD type A & AC in one test
- RCD variable current
- Automatic RCD test sequence
- Phase sequence indicator
Fluke Flk-1663/Fvf Au Installation Tester W/Rcd Type B & Flukeview Forms Au Extra Features
- On/Off switchable auto-start for RCD & loop test
- Self-test
- Illuminated display
- Z-MAX Memory
- Computer Interface (when used with optional FlukeView & Fluke DMS software)
- Time and date (when used with optional FlukeView software)
- Heavy duty, single input line cord
- Compact, lightweight (less than 1.3 kg)
- Padded neck-strap for hands-free testing
-10%
Close
Fluke 1664FC/FVF AU Connect Installation Tester
Fluke Connect Installation Tester Features
The 1664 FC puts more power in your hands by quickly and efficiently testing to all local regulations, protecting appliances that may be inadvertently connected to the system under test, and making it easy to share test results over your smartphone.
- Autotest to test line/loop impedance, RCD trip current / trip time, insulation tests with a single connection and the press of a single button.
- Additional high current loop mode. Faster measurements compared to loop tests with non-trip mode for RCDs.
- Z-max memory for loop tests – easy evaluation of the highest loop test value.
- Unique zero adapter for fast, always reliable and accurate test lead and mains cord compensation.
- Fast voltage measurement between L-N, L-PE and N-PE using the mains cord. No need to change measurement connections.
- Measure RCD trip current & trip time in parallel (RCD type AC and A).
- Two measurements at once and a dual display. PEFC or PSC and loop impedance are measured and displayed in parallel, saving you time.
- Ring testing – select the required input sockets with soft keys – no need to exchange test leads.
- Automatic test start for Loop & RCD tests – as soon as mains voltage is stable it starts testing.
- Earth Volt Touchpad detects raised earth voltages >50 V, indicating potential dangerous situations.
- Supplied with the safety designed SureGrip™ test leads and clips which gives the user a comfortable, reliable grip and consistent results.
- Rotary dial knob indicates clearly which function is selected, all in one spot with no complex multi-level menus.
- Large display with backlight, clear symbols and with exceptionally wide viewing angle for easy and safe readings.
- PASS/FAIL indication for RCD test results.
- Variable RCD current mode for customized settings.
- Loop & line resistance with mΩ resolution.
- Test smooth dc sensitive RCDs (Type B).
- Extended memory with 3 layers.
- Use continuity test currents to measure motor windings.
- Withstands a drop of 1 meter.
- Compact, lightweight (less than 1.3 kg) and padded neck-strap to free your hands for all day testing.
Fluke Connect Installation Tester Inclusions
- 6x AA (IEC LR6) cell batteries
- C1600 hard carrying case
- Zero adapter
- Heavy duty mains cord
- STD standard test lead set
- C1600 hard carrying case
- Padded carrying and waist strap
- Quick reference guide
- TP165X remote control probe and lead
- User’s manual on CD-ROM
-10%
Close
Fluke 1730 Aux Input Cable
Aux Input Cable for use with the Fluke 1730 Three-Phase Energy Logger.
-10%
Close
