The Fluke Networks FiberFinder is a remote ID source for the SimpliFiber Pro. Enables mapping verification and easy documentation as well as double-ended testing with only one technician. Allows you to identify the physical location of cabling runs to ensure polarity and the correct location on each fiber drop.
Previous product
Back to products
MS-POE-KIT - Fluke Networks MicroScanner™ PoE Cable Verifier Kit
$2,208.00
Excluding GST 10%
Next product
FINDFIBER-6 - Fluke Networks Six FindFiber Remote ID
$2,958.00
Excluding GST 10%
FINDFIBER – Fluke Networks FindFiber Source
$513.00Excluding GST 10%
FindFiber Source
Available on backorder
Related products
Close
P4480RJ9 – Fluke Networks TS52/44/42 Replacement Line Cord with Angled Bed-of-Nails/Piercing Pin Clips with RJ11 Plug
- TS52/44/42 replacement cord with ABN/PP clips with RJ11
- Braided cables for durability and insulating boots over clips for safety
- Compatible with TS52 and TS40 Series Test Sets
Close
FTK2000 – Simplifiber PRO Basic Singlemode Verification Kit
Product Highlights
Simple-to-use fiber-loss tester with advanced time-saving features. Choose from various kits with configurations to meet your fiber verification, inspection, and cleaning needs.
- Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record
- Additional wavelengths of 1490 and 1625 nm
- CheckActive™ feature emits an audible tone and displays an icon when a live fiber is detected, eliminating the need to set up a measurement
- FindFiber™ Remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fiber link to match color combinations
Close
LIQ-KIT-IE – Fluke Networks LINKIQ™ Industrial Ethernet Kit
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
Close
FTK1200 – Simplifiber PRO Multimode Fiber Verification Kit
Product Highlights
Simple-to-use fiber-loss tester with advanced time-saving features. Choose from various kits with configurations to meet your fiber verification, inspection, and cleaning needs.
- Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record
- Additional wavelengths of 1490 and 1625 nm
- CheckActive™ feature emits an audible tone and displays an icon when a live fiber is detected, eliminating the need to set up a measurement
- FindFiber™ Remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fiber link to match color combinations
Close
FTK1000 – Simplifiber PRO Basic Fiber Verification Kit
Product Highlights
Simple-to-use fiber-loss tester with advanced time-saving features. Choose from various kits with configurations to meet your fiber verification, inspection, and cleaning needs.
- Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record
- Additional wavelengths of 1490 and 1625 nm
- CheckActive™ feature emits an audible tone and displays an icon when a live fiber is detected, eliminating the need to set up a measurement
- FindFiber™ Remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fiber link to match color combinations
Fluke Networks PRO3000 Tone Generator and Probe Kit
Key features
- Send tone signal up to 10 miles (16 km) on most cables
- Analog tone generator with bed-of-nails clips, unfiltered probe
- SmartTone™ provides 5 distinct tones for exact pair identification
- Continuity testing and line polarity confirmation
- Ergonomic sleek design, 3.5 mm headphone jack
Close
LIQ-100 – Fluke Networks LinkIQ™ Cable+Network Tester
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
Close
CIQ-100 – Fluke Networks CableIQ™ Qualification Tester
Key features
Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP)
- Works on live networks to provide Ethernet switch detection and device configuration
- Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
- Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues
- Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
- Tests all copper cabling media: twisted-pair, coax, and audio
