Showing 1–12 of 48 results

Show sidebar
Close

5080A High Compliance Multi-Product Calibrator

Calibration solutions for your analog and digital workload

  • High compliance
  • Protection circuitry
  • Calibrates a wide workload, including analog meters and 3.5 and 4.5 digits DMMs

The 5080A Multi-Product Calibrator calibrates your analog and digital workload accurately and economically. Its high voltage and current compliance makes analog workload calibration easy and precise. And built-in protection circuitry protects it against damaging input voltages.

-2%
Close

Fluke 1551A-12 Intrinsically Safe Stik Thermometer, 12″

$1,229.00 $1,199.00
Excluding GST 10%

Features

  • Intrinsically-safe, battery operated, portable reference thermometer
  • Provides accuracy of ±0.09°F (±0.05°C) over full range
  • Features intrinsically-safe operation (ATEX and IECEx compliant)
  • Measures -58 to 320°F (-50 to 160°C)
  • Provides user-configurable temperature with Trend/Stability indicator
  • Displays temperature in °C or °F
  • Delivers 300-hour battery life
  • Shows percent battery-life and low-battery indicators
Close

Fluke 525B Temperature/Pressure Calibrator

  • Simulates and measures all ANSI thermocouples, as well as L and U types, and provides cold junction compensation to enable calibration of a wide variety of thermocouple instrumentation.
  • Direct input for storage of ITS-90 RTD constants.
  • RTD source uncertainties to 0.03° C
  • Extend pressure measurement range with any Fluke 750P and 700P Series Pressure Modules
  • Converts easily to any pressure unit directly from the front panel or through remote communications.
  • Sources dc voltage and current for multifunction workload coverage, enabling calibration of data loggers, strip chart recorders, multimeters, and other industrial instruments.
  • Supports automation using MET/CAL® Plus Calibration Management Software or custom automated programs with standard RS-232-C and GPIB interface.
  • Eight user programmable setpoints allow quick recall of values for Zero, Span and linearity checks during calibration. Programmable setpoint dwell times for automated calibration and troubleshooting.
  • Programmable setpoint dwell times for automated calibration and troubleshooting.
  • Selectable internal or external CJC (cold junction compensation) provides you with the ability to make exacting thermocouple measurements using remote junctions.
  • Easy five-way binding posts for low-loss convenient hookup. Banana plug, screw terminal, spade lug, wraparound terminal, wire pass-through terminal.
  • NIST-traceable calibration with data is included
Close

Fluke 5502A Multi-Product Calibrator

Key Features :

  • Calibrates a wide variety of electrical test equipment
  • Robust protection circuits prevent costly damage from operator error
  • Ergonomically designed carrying handles make the 5502A easy to transport
  • Rugged carrying case with built-in handles and wheels and removable front/rear access doors for in-situ calibration in almost any environment
  • Current output that extends to 120 A when paired with the 52120A Transconductance Amplifier
  • Remarkably affordable
-4%
Close

Fluke 6102 – Liquid Bath Calibrator, 35 to 200°C

$7,875.00 $7,599.00
Excluding GST 10%

Fluke 6102-256Liquid Bath Calibrator, 35 to 200°C Offers

Features

  • World’s smallest portable calibration baths can be transported with the fluid in them
  • Stable to ±0.03°C or better, depending on the fluid you use
  • Uniformity is ±0.02°C or better for low uncertainties using a reference thermometer
  • Display accuracy has been improved to ±0.25°C for quick calibrations without a reference thermometer
  • With a 48mm (1.9″) diameter, 140mm (5.5″) deep tank, user can calibrate any type of sensor including short, square, or odd-shaped sensors
-1%
Close

Fluke 6109A – Portable Calibration Bath, 35°C to 250°C

$13,178.00 $12,999.00
Excluding GST 10%

Features

  • Four times more calibration throughput with twice the accuracy of Micro-Baths and dry-block calibrators
  • Calibrate up to four tri-clamp sanitary sensors at a time instead of just one
  • Increase calibration efficiency and reduce production downtime.
  • Excellent display accuracy of ±0.1°C provides 4:1 test uncertainty ratio (TUR) for critical applications
  • Easy to transport up-stairs and across catwalks
  • Clean room compatible. Stainless steel casing withstands sterilizing chemicals and is rust proof
-6%
Close

Fluke 700HTPK Hydraulic Test Kit

$1,913.00 $1,800.00
Excluding GST 10%

The Fluke-700HTPK Hydraulic Test Kit

  • Combine with any Fluke-700G Series Gauge, 1,000 psi range or greater, to make a complete pressure testing kit
  • Generate pressure up to 10,000 psi, 690 bar with the included 700HTP-2 test pump
  • Connect the 700G Series gauge directly to the HTP-2 hand pump
  • Includes 700HTH-1 hose kit and adapters for connecting to the pressure device to be tested
  • Hard case protects pump and gauge and allows gauge to remain connected to the pump
Close

Fluke 700HTPK2 Hydraulic Test Pressure Kit

$2,538.00
Excluding GST 10%

Features

  • Generate pressure up to 10,000 psi, 690 bar with the included 700HTP-2 test pump
  • Includes 700TTH 10K premium/no tools required transmitter test hose kit and adapters
  • Hard case protects pump and gauge and allows gauge to remain connected to the pump
  • Can be combined with any Fluke 700G Series Gauge, 1,000 psi range or greater, to make a complete pressure testing kit
Close

Fluke 700PTPK Pneumatic Test Kit

$1,294.00
Excluding GST 10%

The Fluke-700PTPK Pneumatic Test Kit features include:

  • Combine with any Fluke-700G Series Gauge, 1,000 psi or less, to make a complete pressure testing kit
  • Generate pressure up to 600 psi, 40 bar with the 700PTP-1 test pump.
  • Connect the 700G Series gauge directly to the included PTP-1 hand pump
  • Includes hoses and adapters for connecting to the pressure device to be tested
  • Hard case protects pump and gauge and allows gauge to remain connected to the pump
Close

Fluke 700PTPK2 Pneumatic Test Pressure Kit

$2,426.00
Excluding GST 10%

Features

  • Combine with any Fluke 700G Series Gauge, 1,000 psi (69 bar) or less, to make a complete pressure testing kit
  • Generate pressure up to 600 psi, 40 bar with the 700PTP-1 test pump
  • Connect the 700G Series Gauge directly to the included PTP-1 hand pump with premium no tools required adapter
  • Includes 700TTH 5K premium/no tools required transmitter test hose kit and adapters for connecting to the pressure device to be tested
  • Hard case protects pump and gauge and allows gauge to remain connected to the pump
Close

Fluke 705 Loop Calibrator

$1,375.00
Excluding GST 10%

Key features

  • Powerful loop calibrator that provides a very cost effective, integrated solution for calibration, repair, and maintenance of milliamp loops
  • Provides simultaneous mA and % readout for quick, easy interpretation of readings.
  • Delivers mA accuracy of 0.02%
  • Features push button 25% steps for fast, easy linearity checks
Close

Fluke 707 Current Loop Calibrator

$1,538.00
Excluding GST 10%

Key features

  • High performance loop calibrator for calibration, repair, and maintenance
  • Features large display and simple, quick-click interface for easy one-handed operation.
  • Provides simultaneous mA and % readout for quick, easy interpretation of readings.
  • Delivers mA accuracy of 0.015%
  • Provides 1 µA resolution for mA source, simulate, and measure