-8%
Close
AC288 Terminal Block Probe with Retractable Probe Tip
Key features
- Retractable probe tip designed for increased safety, while providing flexibility to reach deep connection points
- Recommended for use with TL224, TL222 or TL221 Test Leads
- 11.5 cm (4.5 in) insulated, flexible shaft
- 1 mm diameter probe tip extends out to 8.4 mm (0.33 in) length
- Retractable probe tip is made with stainless steel
- Safety rated: IEC 61010-031 Ed.1.12008, CAT III 1000 V, CAT IV 600 V
- Operating temperature: -20 °C to 55 °C (-4 °F to 131 °F), 90% RH
- One-year warranty
-11%
Close
DS NECK STRAP
Work hands-free with the DS701 and DS703 FC Diagnostic Videoscopes with this neck strap.
FE C190 Hard Case for 190 Series
Heavy duty case with accessory storage compartments. 1 year warranty
-9%
Close
Fluke 1AC-A1-II AC Voltage Detector
Features
- Voltage detection of 90V to 1000Vac or 200V to 1000Vac
- Rugged, reliable and has a 2 year warranty
-10%
Close
Fluke 805ES – EXTERNAL VIBRATION SENSOR
- Low-profile 90-degree sensor body allows the sensor to get into tight spots
- Rugged, coiled cable minimizes dangling, while stretching to more than 7ft when needed
- Powerful “U” shaped magnet mount creates a firm connection to flat, or curved measurement surfaces
- Rugged, sealed cable connector with strain relief tail reduces cable wear
- Removable sensor magnet to allow for direct attachment to a sensor mounting pad, or threaded hole on a piece of equipment
- Connects directly to 805 Vibration Meter SMB connector located in the heel of the meter
-9%
Close
Fluke 80AK-A Thermocouple Adapter
Product Features:
- Adapts K-Type thermocouple mini-connector-to-dual shrouded banana plug inputs
- Measurement range and accuracy: probe dependent
- Suitable for low voltage applications (below 30V AC, 60V DC)
Compatible with
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 179 True RMS Digital Multimeter
- Fluke 233 Remote Display Digital Multimeter
- Fluke 233/A Remote Display Automotive Digital Multimeter Kit
- Fluke 27 II Rugged Digital Multimeter
- Fluke 28 II Rugged Digital Multimeter
- Fluke 287 True RMS Electronics Logging Multimeter
- Fluke 289 True RMS Data Logging Multimeter
- Fluke 83V Average Responding Industrial Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
Fluke 80BK-A Integrated DMM Temperature Probe
Features
- Standard shrouded banana jack
- Convenient one piece construction
Compatible with
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 179 True RMS Digital Multimeter
- Fluke 287 True RMS Electronics Logging Multimeter
- Fluke 289 True RMS Data Logging Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
Fluke 80CJ-M type J Male Mini-Connectors
Product Features:
- Isothermal screw terminals for J wire
- Suitable for up to 20 gauge thermocouple wire
- Color coded to industry standards (J-black)
- For use with Models 51, 52, 53, 54, 714, 714B, 724, 725 and 726
- Pack of 2
Fluke 80CK-M type K Male Mini-Connectors
Fluke 80CK-M Offers
For use with Fluke 80TK or Fluke 50 Series.
- Isothermal screw terminal for K wire
- Suitable for up to 20 gauge thermocouple wire
- Color-coded to industry standards (K-yellow)
- Two male mini-connectors per package
- One-year warranty
Fluke 80i-110s AC/DC Current Clamp
Features
- 10 or 100A AC/DC nominal current range
- Continuous current range
- 0.1 to 10A AC/DC (100mV/A output)
- 1 to 100A AC/DC (10mV/A output)
- ±3% of reading +50mA (100mV/A, 50mA to 10A)
- ±4% of reading +50mA (10mV/A, 50mA to 40A)
- ±12% of reading +50mA (40 to 80A)
- ±15% of reading (80 to 100A)
- Maximum non-destructive current of 140A (2kHz)
- Lowest measurable current of 0.1A
- 100kHz useable frequency
- CAT II 600V & CAT III 300V
- 1-year warranty
Fluke 80K-15 High Voltage Probe
Product Features:
- Voltage range: 1kV to 15kV DC or peak AC, 10kVrms AC
- Input resistance: 1000 Megohm
- Division ratio: 1000:1
- Safety rating(s): IEC 1010-2-031:1993, Type B, 10kV DC or peak AC, 10kVrms AC, Overvoltage Category I (voltages derived from limited energy transformer)
- Required meter input resistance: 10 Megohm
Fluke 80K-40 High Voltage Probe
Product Features:
- Voltage range: 1kV to 40kV DC or peak AC, 28kVrms AC
- Input resistance: 1000 Megohm
- Division ratio: 1000:1
- Safety rating(s): IEC 1010-2-031:1993, Type B, 40kV DC or peak AC, 28kVrms AC, Overvoltage Category I (voltages derived from limited energy transformer)
- Required meter input resistance: 10 Megohm
