AC288 Terminal Block Probe with Retractable Probe Tip
Key features
- Retractable probe tip designed for increased safety, while providing flexibility to reach deep connection points
- Recommended for use with TL224, TL222 or TL221 Test Leads
- 11.5 cm (4.5 in) insulated, flexible shaft
- 1 mm diameter probe tip extends out to 8.4 mm (0.33 in) length
- Retractable probe tip is made with stainless steel
- Safety rated: IEC 61010-031 Ed.1.12008, CAT III 1000 V, CAT IV 600 V
- Operating temperature: -20 °C to 55 °C (-4 °F to 131 °F), 90% RH
- One-year warranty
DS NECK STRAP
Work hands-free with the DS701 and DS703 FC Diagnostic Videoscopes with this neck strap.
FE C190 Hard Case for 190 Series
Heavy duty case with accessory storage compartments. 1 year warranty
Fluke 1760 BASIC Three-Phase Power Quality Recorder
Features
- Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
- GPS time synchronization: Correlate data with events or datasets from other instruments with precision
- Flexible and fully configurable thresholds and scale factors: Allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances
- Uninterrupted power supply (40 minutes): Never miss important events – even record the beginning and end of interruptions and outages to help determine the cause
- 2 GB data memory: Enables detailed, simultaneous recording of numerous power parameters for long periods of time
- Comprehensive software included: Provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode
- Plug and play: Allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries
- Rugged field design: Insulated housing and a solid state design with no rotating components enable reliable testing under nearly any conditions
Fluke 1760 TR US Three-Phase Power Quality Recorder with Trans Topas
Features
- Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standar
- GPS time synchronization: Correlate data with events or datasets from other instruments with precision
- Flexible and fully configurable thresholds and scale factors: Allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances
- Uninterrupted power supply (40 minutes): Never miss important events – even record the beginning and end of interruptions and outages to help determine the cause
- 10 MHz, 6000 Vpk waveform capture: Get a detailed picture of even the shortest event
- 2 GB data memory: Enables detailed, simultaneous recording of numerous power parameters for long periods of time
- Comprehensive software included: Provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode
- Plug and play: Allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries
- Rugged field design: Insulated housing and a solid state design with no rotating components enable reliable testing under nearly any conditions
Fluke 1760TR BASIC Three-Phase Power Quality Recorder Kit with Fast Transient
Features
- Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
- GPS time synchronization: Correlate data with events or datasets from other instruments with precision
- Flexible and fully configurable thresholds and scale factors: Allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances
- Uninterrupted power supply (40 minutes): Never miss important events – even record the beginning and end of interruptions and outages to help determine the cause
- 2 GB data memory: Enables detailed, simultaneous recording of numerous power parameters for long periods of time
- Comprehensive software included: Provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode
- Plug and play: Allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries
- Rugged field design: Insulated housing and a solid state design with no rotating components enable reliable testing under nearly any conditions
Fluke 1AC-A1-II AC Voltage Detector
Features
- Voltage detection of 90V to 1000Vac or 200V to 1000Vac
- Rugged, reliable and has a 2 year warranty
Fluke 377FC Non-Contact True RMS AC/DC Clamp Meter
Features
- Measure voltage and current with your clamp jaw
- Faster, safer testing all without touching a live wire using FieldSense™ technology
- Complete three-phase voltage and current tests in three quick steps
Fluke 378FC Non-Contact True RMS AC/DC Clamp Meter with PQ indicator
Features
- Measure voltage and current with your clamp jaw
- Faster, safer testing all without touching a live wire using FieldSense™ technology
- Complete three-phase voltage and current tests in three quick steps
Fluke 393-IRR-PVLEAD Solar Kit with True RMS solar clamp meter, irradiance meter and MC4 test leads, 1500 V
Features
- Measure safely with CAT III 1500 V rated clamp meter
- Work efficiently with DC power measurement, audio polarity and visual continuity
- PV test leads connect measuring devices to solar PV power plants
Fluke 393FC True-rms Clamp Meter with iFlex, CAT III 1500 V, 1500 V DC/1000 V AC/ 999.9 A DC or AC
Features
- IP54 rated, ideal for work outdoors in dusty or damp conditions on solar arrays and wind power systems
- DC power measurement, showing readings in kVA
- Audio polarity indicator helps prevent accidental miswires
- Visual continuity turns provide a bright green light in the display, ideal when working in dark and noisy environments
- Logging and reporting of test results via software
- Measure safely with CAT III 1500 V rated clamp meter
- Thin jaw for access to cables in crowded combiner boxes, able to clamp around multiple cables
- MC4 test lead sets are designed for use with solar clamp meters that accept 0.15″ (4 mm) banana plugs, rated to CAT III 1000 V / CAT IV 600 V
- View voltage and current simultaneously with the meter’s dual display
Fluke 393FC-PVLEAD Solar Kit with True RMS solar clamp meter and MC4 test leads, 1500 V
Features
- Measure safely with CAT III 1500 V rated clamp meter
- Thin jaw for access to cables in crowded combiner boxes
- Work efficiently with DC power measurement, audio polarity and visual continuity
- PV test leads connect measuring devices to solar PV power plants, for use in regular tests, measurements, and troubleshooting
Fluke 805ES – EXTERNAL VIBRATION SENSOR
- Low-profile 90-degree sensor body allows the sensor to get into tight spots
- Rugged, coiled cable minimizes dangling, while stretching to more than 7ft when needed
- Powerful “U” shaped magnet mount creates a firm connection to flat, or curved measurement surfaces
- Rugged, sealed cable connector with strain relief tail reduces cable wear
- Removable sensor magnet to allow for direct attachment to a sensor mounting pad, or threaded hole on a piece of equipment
- Connects directly to 805 Vibration Meter SMB connector located in the heel of the meter
Fluke 80AK-A Thermocouple Adapter
Product Features:
- Adapts K-Type thermocouple mini-connector-to-dual shrouded banana plug inputs
- Measurement range and accuracy: probe dependent
- Suitable for low voltage applications (below 30V AC, 60V DC)
Compatible with
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 179 True RMS Digital Multimeter
- Fluke 233 Remote Display Digital Multimeter
- Fluke 233/A Remote Display Automotive Digital Multimeter Kit
- Fluke 27 II Rugged Digital Multimeter
- Fluke 28 II Rugged Digital Multimeter
- Fluke 287 True RMS Electronics Logging Multimeter
- Fluke 289 True RMS Data Logging Multimeter
- Fluke 83V Average Responding Industrial Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
Fluke 80BK-A Integrated DMM Temperature Probe
Features
- Standard shrouded banana jack
- Convenient one piece construction
Compatible with
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 179 True RMS Digital Multimeter
- Fluke 287 True RMS Electronics Logging Multimeter
- Fluke 289 True RMS Data Logging Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
Fluke 80CJ-M type J Male Mini-Connectors
Product Features:
- Isothermal screw terminals for J wire
- Suitable for up to 20 gauge thermocouple wire
- Color coded to industry standards (J-black)
- For use with Models 51, 52, 53, 54, 714, 714B, 724, 725 and 726
- Pack of 2
Fluke 80CK-M type K Male Mini-Connectors
Fluke 80CK-M Offers
For use with Fluke 80TK or Fluke 50 Series.
- Isothermal screw terminal for K wire
- Suitable for up to 20 gauge thermocouple wire
- Color-coded to industry standards (K-yellow)
- Two male mini-connectors per package
- One-year warranty
Fluke 80i-110s AC/DC Current Clamp
Features
- 10 or 100A AC/DC nominal current range
- Continuous current range
- 0.1 to 10A AC/DC (100mV/A output)
- 1 to 100A AC/DC (10mV/A output)
- ±3% of reading +50mA (100mV/A, 50mA to 10A)
- ±4% of reading +50mA (10mV/A, 50mA to 40A)
- ±12% of reading +50mA (40 to 80A)
- ±15% of reading (80 to 100A)
- Maximum non-destructive current of 140A (2kHz)
- Lowest measurable current of 0.1A
- 100kHz useable frequency
- CAT II 600V & CAT III 300V
- 1-year warranty
Fluke 80K-15 High Voltage Probe
Product Features:
- Voltage range: 1kV to 15kV DC or peak AC, 10kVrms AC
- Input resistance: 1000 Megohm
- Division ratio: 1000:1
- Safety rating(s): IEC 1010-2-031:1993, Type B, 10kV DC or peak AC, 10kVrms AC, Overvoltage Category I (voltages derived from limited energy transformer)
- Required meter input resistance: 10 Megohm
Fluke 80K-40 High Voltage Probe
Product Features:
- Voltage range: 1kV to 40kV DC or peak AC, 28kVrms AC
- Input resistance: 1000 Megohm
- Division ratio: 1000:1
- Safety rating(s): IEC 1010-2-031:1993, Type B, 40kV DC or peak AC, 28kVrms AC, Overvoltage Category I (voltages derived from limited energy transformer)
- Required meter input resistance: 10 Megohm
Fluke 80K-6 KV High Voltage Probe
Product Features:
- Voltage range: 0 to 6kV DC, or peak AC
- Input resistance: 75 Megohm nominal
- Division ratio: 1000:1
- Safety rating(s): CAN/CSA C22.2 No. 1010.2.031-94 and IEC 1010-2-031:1993, Type B, 6kV DC or peak AC, 4.24kVrms AC, Overvoltage CAT I (Voltage derived from limited energy transformers)
- Required meter input resistance: 10 Megohm
Fluke 80PJ-1 Type J Bead Probe
Fluke 80PJ-1 Offers
- This basic, inexpensive thermocouple offers good accuracy and fast response. (Not suitable for liquid immersion.)
- Type-J thermocouple for general purpose applications
- Measurement range: -40 to 260°C
Fluke 80PJ-9 General Purpose Probe
Fluke 80PJ-9 Offers
- J-type probe for use on surfaces and for insertion into air and non-caustic gases.
- Probe constructed with 304 stainless steel is compatible with J-type thermometers.
- Measurement range:-40°C to 260 °C
Fluke 80PJ-9 Specifications
Measurement Range F ( C ) -40 to 500F (-40 to 260C)
Accuracy (degree + or -) 1.1C at 0 to 260C
Probe Tip O.D. inches (mm) 0.375 (9.5)
Probe Tip Length inches (mm) 5.5 (140)
Cable Length inches (meters) 40 (1)
Manufacturer’s Warranty 1-year
Fluke 80PJ-EXT Extension Wire Kit
- Extending and repairing J-type thermocouple wires
- Kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors
- Maximum continuous exposure temperature: 260°C
- 80PJ-EXT is designed for J-type thermometers
- One year warranty
Fluke 80PK-1 Beaded K-Type Probe
Product Features:
- Type-K thermocouple
- For General purpose applications
- Measurement range: -40 to 260 °C (40 to 500 °F)
- One year warranty
Fluke 80PK-10 Pipe Clamp Temperature Probe
- Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces
- For pipe diameters: 32 mm to 64 mm (1.25 in to 2.5 in)
- Measurement range: -29 °C to149 °C (-20 °F to 300 °F)
- Measurements are repeatable to 0.56 °C (1 °F)
- Durable ribbon sensor
- 1 m (39 in) lead
- One year warranty
Fluke 80PK-11 Type-K Thermocouple
Product Features:
- Type-K thermocouple
- Designed for hands free measurement of HVAC temperature measuring applications
- Use multiple and leave in place for route based routine maintenance
- Use with any temperature-measuring instrument designed to accept Type-K thermocouples
- Measurement range: -30 to 150 °C (-22 to 302 °F)
- Accuracy: ±1.5 °C (±2.7 °F)
- Measurement time (time constant): 10 seconds
- Maximum voltage: 24 V AC rms or 60 V DC maximum for proper safe operation
- Maximum temperature: 150 °C (302 °F)
- Cable:
- Total length: 1 m (40 in), 0.97 m (38 in) lead wire, 49.5 cm (19.5 in) fabric hook-and-loop fastener cuff
- Insulation material: Hytrel
- Width of attachment material: 2.5 cm (1 in)
- Min usable pipe diameter: 3.8 cm (1.5 in)
- Max. usable pipe diameter: 14 cm (5.5 in)
- Connector:
- Type: Yellow mini-thermocouple with 0.500 in pin
- Material: Hytrel 4774
- Maximum temperature: 200 °C (392 °F)
- One year warranty
Fluke 80PK-18 Probe Kit
Product Features:
- Type-K thermocouples for fast temperature and super-heated measurements of pipe surfaces
- For pipe diameters: 6.4 mm to 64 mm (0.25 in to 2.5 in)
- 80PK-8: 6.4 mm to 34.9 mm (0.25 in to 1.375 in)
- 80PK-10: 32 mm to 64 mm (1.25 in to 2.5 in)
- Measurement range: 29 to149 °C (-20 to 300 °F)
- Measurements are repeatable to 0.56 °C (1 °F)
- Durable ribbon sensor
- 1 m (39 in) lead
- One year warranty
Fluke 80PK-22 Temperature Probe
Features
- The thermocouple junction is protected from tip to handle by an Inconel sheath
Applications
- Liquid
- Gels
Compatible with
- Fluke 51 II Handheld Digital Probe Thermometer
- Fluke 52 II Dual Probe Digital Thermometer
- 53 II Temperature Logging Digital Thermometer
- 54 II B Data Logging Thermometer with Dual Input
- Fluke 787 ProcessMeter Digital Multimeter
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 175 True RMS Digital Multimeter
- Fluke 179 True RMS Digital Multimeter
- 568 Contact and Infrared Temperature Gun
- 568 Ex Intrinsically Safe Mini Infrared Thermometer
Fluke 80PK-24 Air Temperature Probe
Features
- Bead protected by perforated baffle
- Type-K thermocouple for use in air and non-caustic gas measurements
- -40 to 1500°F (-40 to 816°C) temperature range
- Gripping surface made from thermoplastic rubber
- 1-year warranty
Fluke 80PK-25 Piercing Temperature Probe
Product Features:
- Type-K thermocouple suitable for food industry, liquids and gels
- Gripping surface made from thermoplastic rubber
- Measurement range : -40 to 260 °C (-40 to 500 °F)
- One year warranty
Fluke 80PK-25 Offers
Applications
- Food industry
- Liquids
- Gels
Compatible with
- Fluke 51 II Handheld Digital Probe Thermometer
- Fluke 52 II Dual Probe Digital Thermometer
- 53 II Temperature Logging Digital Thermometer
- 54 II B Data Logging Thermometer with Dual Input
- Fluke 787 ProcessMeter Digital Multimeter
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 179 True RMS Digital Multimeter
- Fluke 83V Average Responding Industrial Multimeter
- 572-2 High Temperature Infrared Thermometer
- 568 Ex Intrinsically Safe Mini Infrared Thermometer
Fluke 80PK-26 Tapered Temperature Probe
Fluke 80PK-26 Offers
Features
- Tapered tip
- Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications
- Measurement range: -40 to 816 °C (104 to 1500 °F)
- One year warranty
Applications
- Air
- Non-caustic gas
- Surface
Compatible with
- Fluke 51 II Handheld Digital Probe Thermometer
- Fluke 52 II Dual Probe Digital Thermometer
- 53 II Temperature Logging Digital Thermometer
- 54 II B Data Logging Thermometer with Dual Input
- Fluke 787 ProcessMeter Digital Multimeter
- Fluke 287 True-RMS Electronics Logging Multimeter
- Fluke 289 True RMS Data Logging Multimeter
- Fluke 83V Average Responding Industrial Multimeter
- 572-2 High Temperature Infrared Thermometer
- 568 Ex Intrinsically Safe Mini Infrared Thermometer
Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe
Product Features:
- Type-K thermocouple
- Durable ribbon sensor
- Measurement range: -127 to 600 °C (-196 to 1112 °F)
- One year warranty
Compatible with
Compatible with any temperature measuring instrument that accepts type K thermocouples features a miniature connector input and a cold reference junction compensation. Additionally, this industrial surface temperature probe is ideal for surfaces in rugged environments.
- Fluke 52 II Dual Probe Digital Thermometer
- 53 II Temperature Logging Digital Thermometer
- 54 II B Data Logging Thermometer with Dual Input
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 233 Remote Display Digital Multimeter
- Fluke 27 II Rugged Digital Multimeter
- Fluke 83V Average Responding Industrial Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
- 572-2 High Temperature Infrared Thermometer
- 568 Ex Intrinsically Safe Mini Infrared Thermometer
Fluke 80PK-3A Surface Probe
Fluke 80PK-3A Offers
Features
- Measures temperature of flat or slightly convex surfaces
- Exposed junction to allow direct contact with the surface being measured
Compatible with
- Fluke 51 II Handheld Digital Probe Thermometer
- Fluke 52 II Dual Probe Digital Thermometer
- 53 II Temperature Logging Digital Thermometer
- 54 II B Data Logging Thermometer with Dual Input
- Fluke 179 IMSK Industrial Multimeter Service Kit
- Fluke 179 True RMS Digital Multimeter
- Fluke 233 Remote Display Digital Multimeter
- Fluke 27 II Rugged Digital Multimeter
- Fluke 28 II Rugged Digital Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
Fluke 80PK-8 Pipe Clamp Temperature Probe
Product Features:
- Type-K thermocouple for fast temperature and super-heateded measurements of pipe surfaces
- For pipe diameters: 6.4 to 34.9 mm (0.25 to 1.37 in)
- Measurement range: -29 to 149 °C (-20 to 300 °F)
- Measurements are repeatable to 0.56 °C (1 °F)
- Durable ribbon sensor
- One year warranty
Fluke 80PK-9 General Purpose Probe
Digital Multimeters
- Fluke 114 Electrical Multimeter
- Fluke 116 Digital HVAC/R Multimeter
- Fluke 233 Remote Display Digital Multimeter
- Fluke 27 II Rugged Digital Multimeter
- Fluke 28 II Rugged Digital Multimeter
- Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter
IR Thermometers
- Fluke 561 HVAC/R Infrared & Contact Thermometer
- Fluke 568 Contact & Infrared Temp Gun
- Fluke 572-2 High Temperature Infrared Thermometer
Intrinsically Safe
- Fluke 568 Ex Intrinsically Safe Mini Infrared Thermometer