Fluke Ti-TRIPOD2 – Tripod for Fluke Ti1XX and TiR1XX Thermal Imagers
Fluke TI-TRIPOD2 Offers TRIPOD MTG ACCESSORY/HOLDER TI100-110-125
Fluke TI-TRIPOD3 Mounting Accessory
This tripod mounting base helps stabilize your thermal imager when mounting to a standard tripod or monopod. Use with the
Fluke TI-VISOR Thermal Imager Visor
For use with Fluke Ti-series Thermal Imagers.
Fluke Ti-VISOR2 – Visor for Ti1XX and TiR1XX Thermal Imagers
Fluke TI-VISOR2 Offers VISOR FOR TI100 TI110 TI125 TIR110 AND TIR125
Fluke Ti20-RBP Rechargeable Battery Pack
Fluke TI20-RBP Specifications
- Operating Temperature – 14 to 122°F (-10 to 50°C)
- Long Term Storage Temperature – -4 to 113°F (-20 to 45°C)
- Battery Type – NiMH, 7.2 V, 1900 mAh, 13.7 Whr
- Dimensions – 4.3 x 1.2 x 1.2″ (11 x 3 x 3 cm)
Fluke TIX5X-LENS CAP Lens Cover
For use with TIX520 and TIX560 infrared cameras.
Fluke TIX5XX HAND Handstrap
For use with the TIX5XX Infrared Cameras.
Fluke TIX5XX-HDMI Cable
For use with the TIX5XX Infrared Cameras.
Fluke TIX5XX-NECK Neckstrap
For use with the TIX5XX Infrared Cameras.
Fluke TIX5XX-SBP4 Smart Battery Pack
For use with the TIX5XX Infrared Cameras.
Fluke TL1550B Test Leads with Alligator Clips (Red, Black, Green)
Features
- 3 Test Leads connected to Low-Leakage Probes (red, black, green)
- 3 Alligator Clips (red, black, green)
- Maximum Jaw Opening: 26 mm (1 in.)
- Replacement Test Lead Set for the Fluke 1550B MegOhmMeter
- Length (Lead Only): 2.6 m (8.6 feet)
- Cat II 1000 V, Cat III 600 V, 5kV DC Max (Probes)
- Cat II 1000 V, Cat III 600 V, 20 amps (Alligator Clips)
Fluke TL1550EXT Extended Test Lead Set – 25 foot
Product Features:
- Maximum jaw opening: 26mm (1 in.)
- Length (lead only): 7.62m (25 feet)
- Safety ratings (probes): Cat II 1000V, Cat III 600V, 5kV DC Max
- Safety ratings (alligator clips): Cat II 1000V, Cat III 600V, 20A
- For use with Models 1550B, 1550C and 1555
- 1 – Low-Leakage Test Lead (Red)
- 1 – Low-Leakage Test Lead (Black)
- 1 – Low-Leakage Test Lead/Probe (Green)
- 1 – Alligator Clip (Red)
- 1 – Alligator Clip (Black)
- 1 – Alligator Clip (Green)
Fluke TL165X Standard TL set with leads probes caps alligator clips
Product Features:
- Standard test lead set
- 60 in. leads
- For use with 1650 Series
- 1 – Fused Test Lead (Red)
- 1 – Fused Test Lead (Blue)
- 1 – Fused Test Lead (Green)
- 1 – Fused Test Probe (Red)
- 1 – Fused Test Probe (Blue)
- 1 – Fused Test Probe (Green)
- 1 – Alligator Clip (Red)
- 1 – Alligator Clip (Blue)
- 1 – Alligator Clip (Green)
Fluke TL175 TwistGuard Test Leads
Features
- Extra-heavy duty strain relief on probe and plug
- Tested beyond 30,000 bends without failure
- -4 to 131°F (-20 to 55°C) operating temp
- Altitude of 6562ft (2000m)
- CAT II 1000V, CAT III 1000V, CAT IV 600V rated
- 10A max, Pollution Degree 2
- Conforms to EN61010-031
- 1-year warranty
Fluke TL175E TwistGuard Test Leads with 4 mm Lantern Tips
- 1 – TwistGuard Lantern Tip Test Lead (Red)
- 1 – TwistGuard Lantern Tip Test Lead (Black)
Fluke TL220 Test Lead Set
Product Features:
- Designed to provide reliable grip in slippery hands
- Interchangeable test lead set for multiple electrical applications
- Compatible with all instruments and test probes that accept standard 4 mm shrouded banana connectors
- 1 – SureGrip Alligator Clip (Red)
- 1 – SureGrip Alligator Clip (Black)
- 1 – SureGrip Industrial Test Probe (Red)
- 1 – SureGrip Industrial Test Probe (Black)
- 1 – SureGrip Silicon Insulated Test Lead (Red)
- 1 – SureGrip Silicon Insulated Test Lead (Black)
Fluke TL221 SureGrip™ Test Lead Extension Set
Features
- One pair (red, black) of silicone insulated leads with straight connectors on both ends
- Reinforced strain relief
- Extends test leads by 1.5 m
- 600 V CAT IV, 1000 V CAT III, 10 A rating. UL listed
Fluke TL222 Test Leads
Features
- Designed to improve steadiness in slippery hands
- Rubber overmolded surfaces and finger-hugging curves
- Reinforced strain relief
- CAT IV 600V & CAT III 1000V safety rating
- 10A rating
- UL listed
- 1-year warranty
Fluke TL223 Test Lead Set
Features
- Designed to improve steadiness in slippery hands
- Rubber overmolded surfaces and finger-hugging curves
- 1-year warranty
Fluke TL224 Test Leads
Product Features:
- Rubber overmolded surfaces and finger-hugging curves for comfortable, reliable grip
- Safety shrouded, standard diameter banana plugs
- Right angle connector on one end and straight connector on other end
- Reinforced strain relief
- 1.5 meter silicone-insulated wire resists heat and cold
- Safety rating(s): CAT IV 600V, CAT III 1000V, 10A
- UL listed
Fluke TL225 Test Lead Kit
Features
- Low input impedance that eliminates stray voltages
- Indicate the real voltage on energized wires
- Non-energized circuits will read close to zero
- Works with meters with standard input spacing
- Rated CAT III 1000V & CAT IV 600V
What’s included with the Fluke TL225
- Stray Voltage Eliminator
- Silicone Test Lead Set
- Test Probe Set
- Carrying Case
Fluke TL238 SureGrip Test Lead Set
Features
Designed for high energy environments, this kit comes equipped with the TP238, TP280, and TL224.
- Up to 10A
- 1000V CAT III maximum
- 600V CAT IV (TP238 & TL224 only)
- Operating temperatures from -4 to 122°F (-20 to 50°C)
- IEC 1010-2-031
- Pollution degree 2
- 1-year warranty
Fluke TL26A Test Lead Set
Product Features:
- U-shaped nose for blade-shaped terminals
- Notched jaw for gripping screw heads, bare wire or terminals
- Serrated teeth for gripping threaded or wire-wrapped terminals
- Cluster of sharp needles for piercing small gauge wires (#22-#28 AWG)
- Large piercing needle for penetrating larger gauge wires
Fluke TL27 Test Leads
Product Features:
- Safety shrouded, standard diameter banana plugs
- Heavy duty EPDM insulation
- Length 1.5 m
- Safety rating(s): CAT III 1000V, 10A
- UL listed
Fluke TL28A Automotive Test Lead Set
Features
- Large jaws, long leads and a piercing needle inside the jaws
- Solid, spring-loaded copper clips with a wide 0.50″ (12.7 mm) jaw opening and serrated teeth
- Large piercing needle for penetrating larger gauge wires located inside the jaws
- 60″ (1.5 m), silicone-insulated leads, useable from -112 to 158°F (-80 to 70°C)
- Rated for 30 V, 10 A
Fluke TL40 Retractable Tip Test Lead Set
Product Features:
- Sharp needle point lead tips
- Adjustable to 76 mm
- Extra hard probe tips provide long service life
- Flexible silicone insulated test leads
- Safety rating(s): CAT II 600V, 3A
Fluke TL71 Test Lead Set
Fluke TL71 Offers
Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL71 premium test lead set has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V.
Features
- One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads
- Recommended for µV measurements
- CAT II 1000 V, 10 A rating
- CAT III 1000 V, CAT IV 600V only with protective cap
- One year warranty
Applications
- Test and measurement
- Oil and gas
- R&D
- Electronics design
- Electronics service
- Repair and maintenance
- Electrical
- Industrial
Fluke TL75 Hard Point Test Lead Set
Product Features:
- Comfort grip probes
- 48 in. PVC insulated test leads with right-angle shrouded banana plugs
- Recommended for general purpose measurements
- Safety rating(s): CAT II 1000V, 10A; CAT IV 600V, CAT III 1000V only with protective cap
- CSA listed
Fluke TL76 Test Lead Set
Features
- Removable, insulated IC caps allow probing on closely spaced leads and compliance with GS38
- CAT II 1000 V, 10 A rating
- CAT III 1000 V, CAT IV 600V only with protective cap
Fluke TL80A Basic Electronic Test Lead Kit
Fluke TL80A Offers
Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL80A Basic Electronic Test Lead Kit has the fundamental accessories for testing electronics. Includes the Fluke TL71 premium test lead set which has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V. The TL80A comes with the C75 accessory case to easily store your test leads.
Features
- One pair (red, black) each 1 meter long silicone test lead set, alligator clip and probe tip extender
- Probe tip size: 2 mm
- C75 soft carrying case
- CAT II 300 V. UL listed
- One year warranty
Fluke TL81A Deluxe Electronic Test Lead Kit
Fluke TL81A Offers
The Fluke TL81A Deluxe Electronic Test lead kit is ideal for testing electronic equipment. It offers test versatility with modular test probes, alligator clips, test clips and other accessories included and can attach directly to the SureGrip™ test leads. The kit consists of a quad fold nylon pouch containing 11 items.
Features
- Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures
- Insulated alligator clip rated up to 5A
- Insulated probe tip extender rated up to 3A
- Modular test probe with banana connector in the handle, rated up to 10A
- Modular hook-style clip test lead with banana connector, rated up to 5A
- Modular pinch-style clip test lead with banana connector, rated up to 5A
- Modular alligator clip with banana connector, rated up to 5A
- Slide-on IC probe tip adapter (rated up to 3A) and test lead couplers
- Bare spade lug with banana connector, rated up to 10A
- One year warranty
Applications
- Test and Measurement
- Oil and Gas
- R&D
- Electronics Design
- Electronics Service
- Repair and Maintenance
- Electrical
- Industrial
Fluke TL82 Automotive Pin & Socket Adapter Set
- Retractable shrouded test leads
- Complete set of 8 pin-and-socket adapters with flexible tips
- For work on Asian or European vehicles
- Collection of male and female adapters allows you to make firm connection to pin and socket connectors
- Useful when making voltage, frequency, duty cycle or resistance measurements
- A must for measuring current requiring meter be placed in circuit series
- Size 22 contact 0.030 in (0.76 mm) rated 5 A
- Size 20 contact 0.040 in. (1.02 mm) rated 7.5A
- Size 16 contact 0.063 in. (1.60 mm) rated 13
- Tested to 60 V DC
- Size 12 contact 0.093 in. (2.36 mm) rated 23
Fluke TL910 Electronic Test Probes
Product Features:
- 1 mm tips access hard to reach test points
- Probe tip length up to 100 mm
- Test lead length: 1 m
- 3 sets of spring loaded gold tips
- 2 sets of stainless steel tips
- Safety rating(s): CAT II 1000V, 3A
Fluke TL930 Patch Cords
Fluke TL930 Offers
- 1 pair (red, black) multi-stacking 4 mm banana plug patch cords
- Nickel-plated banana plugs
- 61 cm long PVC insulated leads
- 30 V rms or 60 V DC, 15 A
- One year warranty
Fluke TL932 Patch Cords
Fluke TL932 Offers
- 1 pair (red, black) multi-stacking 4 mm banana plug patch cords
- Nickel-plated banana plugs
- 90 cm long PVC insulated leads
- 30 V rms or 60 V DC, 15 A
- One year warranty
Fluke TL935 Patch Cords
Fluke TL935 Offers
- 3 sets (red and black pairs) of multi-stacking 4 mm banana plug patch cords
- Nickel-plated banana plugs
- 60 cm, 90 cm, 120 cm long PVC insulated leads
- 30 V rms or 60 V DC, 15 A
- One year warranty
- 1 – Patch Cord, 60 cm (Red)
- 1 – Patch Cord, 60 cm (Black)
- 1 – Patch Cord, 90 cm (Red)
- 1 – Patch Cord, 90 cm (Black)
- 1 – Patch Cord, 120 cm (Red)
- 1 – Patch Cord, 120 cm (Black)