Showing 1–12 of 255 results

Show sidebar
-17%
Close

61 Mini Handheld Infrared Thermometer

$343.00 $285.00
Excluding GST 10%

Measure temperature in hard-to-reach, hot, rotating, or dangerous situations with this infrared thermometer. This unit allows users to monitor the status of electrical motors and electrical panels, research heating, ventilation problems, and diagnose car malfunctions. Also, it provides a distance to spot ratio of 8:1.

Close

AC288 Terminal Block Probe with Retractable Probe Tip

$67.00
Excluding GST 10%

Key features

Close

Amprobe ALC 110 Leakage Current Clamp

$875.00
Excluding GST 10%

• Following the standard for leakage current clamps IEC/EN 61557-13
• Low influence of external low-frequency magnetic fields: ≤ 30 A/m, operating class 2 @ IN: 3.500 mA – 600.0 mA
• True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
• Mechanical lock of the jaw; jaw opening 30 mm (1.2 in)
• Highest resolution of 0.001 mA, measure up to 60 A
• Selectable filter function removes unwanted noise
• Selectable filters: – Low Pass Filter Function for appliance measuring (acc. IEC/EN 61557-16 amendment A)
– 50/60 Hz filter
– no filter
• Broad frequency range 15 Hz to 1 kHz which makes this clamp ideal for a wide range of applications including industrial and railway application
• Selectable limits:
0.25 mA, 0.5 mA, 3.5 mA, 10 mA, 12 mA

-14%
Close

Fluke 1000FLT Fluorescent Light Tester

$443.00 $380.00
Excluding GST 10%
  • Lamp test: test bulb without removing from fixture
  • Ballast test: easily determine if ballast is working
  • Non-contact voltage: quickly check for voltage presence
  • Pin continuity test: tests if filaments have continuity
  • Ballast-type test: determine if ballast is electronic or magnetic without taking fixture apart identify energy wasting ballasts
  • Survives on-the-job handling: drop-tested to survive from a six foot (two meter) ladder
  • Easy to use: bright indicator light plus audible alert
  • Rugged: backed with a three-year warranty
-12%
Close

Fluke 113 True RMS Utility Multimeter with VCHECK

$228.00 $200.00
Excluding GST 10%
  • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
  • True RMS for accurate AC measurements on non-linear loads
  • A large backlit display allows for easy visibility in low-lit areas
  • Record signal fluctuations using the Min/Max function
  • Diode test for testing general-purpose germanium, silicon, and power diodes
  • Integral holster with probe holders for easy storage
  • Auto and Manual ranging for added user functionality
  • Meets measurement category CAT IV 600 V and Category IV 300 V standards for a higher level of safety
  • The optional TPAK magnetic hanger allows the user hands-free flexibility (sold separately)
-12%
Close

Fluke 114 True RMS Electrical Multimeter with AutoVolt, 600 V

$256.00 $225.00
Excluding GST 10%
  • Features a compact ergonomic design for one-handed operation
  • Comes with an holster with probe holders for easy storage
  • Features manual and automatic ranging
  • Safety rates CAT III 600 V
  • Fits into optional ToolPak™ magnetic hanger for hands-free operation
-15%
Close

Fluke 115 Field Technicians Digital Multimeter

$288.00 $245.00
Excluding GST 10%
  • Compact True-rms digital multimeter for field service
  • Includes: meter, holster, 4 mm silicone test lead set
  • Easy one-handed operation of the meter
  • Min/Max/Average to record signal fluctuations
-12%
Close

Fluke 116 Digital HVAC Multimeter

$455.00 $400.00
Excluding GST 10%
  • Measures resistance, continuity, frequency, and capacitance
  • Provides Min/Max/Average to record signal fluctuations
  • Comes with a holster with probe holders for easy storage
  • Features a compact ergonomic design for one-handed operation
  • Fits into optional ToolPak™ magnetic hanger for hands-free operation
  • CAT III 600 V safety rated
-17%
Close

Fluke 116/323 KIT HVAC Combo Kit

$650.00 $540.00
Excluding GST 10%

Features

  • Fluke 116 HVAC Multimeter:
    • 600 V max between terminal and earth ground
    • 6 kV peak per IEC 61010-1 600 V CAT III
    • 6,000 count display
    • Display updates at 4/sec
  • Fluke 323 True RMS Clamp Meter:
    • 400 A ac current measurement
    • 600 V ac and dc voltage measurement
    • True-rms ac voltage and current
    • Resistance measurement to up to 40 kΩ
Close

Fluke 116/62 MAX+ Technician’s Combo Kit

$650.00
Excluding GST 10%

Features

  • Fluke 116 HVAC Multimeter
    • Built-in thermometer for HVAC applications
    • Microamps to test flame sensors
    • Low input impedance helps prevent false readings due to ghost voltage
    • Work in poorly lit areas with the Large white LED backlit display
    • True-rms voltage and current for accurate measurements on non-linear loads
    • Measures 10 A directly (20 A overload for 30-seconds) without a current clamp
    • Resistance, continuity, frequency and capacitance
    • Record signal fluctuations using Min/Max/Average and elapsed time stamps
    • Easy to use with one hand
    • Hands free operation with optional magnetic hanger (ToolPak™)
    • CAT III 600 V safety rated
  • Fluke 62 MAX+ Infrared Thermometer
    • Measure -30°C to 650°C (-22°F to 1202°F)
    • Extremely accurate: up to +1.0°C or + 1.0% of reaching (Fluke 62 MAX+)
    • IP54 rating for water resistance and dust proof allow you to work rain or shine and even in the most dirty or dusty industrial sites
    • Strong enough to withstand a 3m drop. No worry even if you work from a ladder
    • Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box
    • Dual lasers: The 62 MAX+ has dual lasers to help you identify area to be measured
-15%
Close

Fluke 117 Electrician’s Multimeter

$363.00 $310.00
Excluding GST 10%
  • VoltAlert™ technology for non-contact voltage detection
  • AutoVolt automatic ac/dc voltage selection
  • LoZ: helps prevent false readings due to ghost voltage
  • Large white LED backlight to work in poorly lit areas
  • True-rms for accurate measurements on non-linear loads
  • Measures 10 A (20 A overload for 30 seconds)
  • Resistance, continuity, frequency and capacitance
  • Min/max/average to record signal fluctuations
  • Compatible with optional magnetic hanger (ToolPak™) for hands free operation
  • Accurate and easy-to-use
  • Provides low input impedance to help prevent false readings due to ghost voltage
  • CAT III 600 V safety rated
Close

Fluke 117/323 Electrician’s Combo Kit

$455.00
Excluding GST 10%

Features

  • Fluke 117 electrician’s multimeter
    • VoltAlert™ technology for non-contact voltage detection.
    • AutoVolt automatic ac/dc voltage selection.
    • Low input impedance: Helps prevent false readings due to ghost voltage.
    • Large white LED backlight to work in poorly lit areas.
    • True-rms for accurate measurements on non-linear loads.
    • Measures 10 A (20 A overload for 30-seconds).
    • Resistance, continuity, frequency and capacitance.
    • Min/Max/Average to record signal fluctuations.
    • Compact ergonomic design for one-handed operation.
    • CAT III 600 V safety rated.
  • Fluke 323 clamp meter
    • 400 A ac current measurement.
    • 600 V ac and dc voltage measurement.
    • True-rms ac voltage and current for accurate measurements on non-linear signals.
    • Resistance measurement up to 40 kΩ with continuity detection.
    • Slim, ergonomic design.
    • CAT IV 300V/CAT III 600 V safety rating.