Showing 1–24 of 721 results

Show sidebar
-10%
Close

61 Mini Handheld Infrared Thermometer

$343.00 $309.00
Excluding GST 10%

Measure temperature in hard-to-reach, hot, rotating, or dangerous situations with this infrared thermometer. This unit allows users to monitor the status of electrical motors and electrical panels, research heating, ventilation problems, and diagnose car malfunctions. Also, it provides a distance to spot ratio of 8:1.

-9%
Close

AC288 Terminal Block Probe with Retractable Probe Tip

$74.00 $67.00
Excluding GST 10%

Key features

-11%
Close

DS NECK STRAP

$75.00 $67.00
Excluding GST 10%

Work hands-free with the DS701 and DS703 FC Diagnostic Videoscopes with this neck strap.

-10%
Close

FE AS400

$196.00 $176.00
Excluding GST 10%

Probe Accessory set for VPS400 Probes.

-10%
Hard Case for 190 Series
Close

FE C190 Hard Case for 190 Series

$432.00 $389.00
Excluding GST 10%

Heavy duty case with accessory storage compartments. 1 year warranty

-10%
Close

Fluke 1000FLT Fluorescent Light Tester

$443.00 $399.00
Excluding GST 10%
  • Lamp test: test bulb without removing from fixture
  • Ballast test: easily determine if ballast is working
  • Non-contact voltage: quickly check for voltage presence
  • Pin continuity test: tests if filaments have continuity
  • Ballast-type test: determine if ballast is electronic or magnetic without taking fixture apart identify energy wasting ballasts
  • Survives on-the-job handling: drop-tested to survive from a six foot (two meter) ladder
  • Easy to use: bright indicator light plus audible alert
  • Rugged: backed with a three-year warranty
-10%
Close

Fluke 110 True-rms Digital Multimeter

$229.00 $206.00
Excluding GST 10%

Key features

  • True-rms ac voltage for accurate measurements on non-linear signals
  • Resistance and continuity
  • Large white LED backlight to work in poorly lit areas
-10%
Close

Fluke 113 True RMS Utility Multimeter with VCHECK

$228.00 $205.00
Excluding GST 10%
  • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
  • True RMS for accurate AC measurements on non-linear loads
  • A large backlit display allows for easy visibility in low-lit areas
  • Record signal fluctuations using the Min/Max function
  • Diode test for testing general-purpose germanium, silicon, and power diodes
  • Integral holster with probe holders for easy storage
  • Auto and Manual ranging for added user functionality
  • Meets measurement category CAT IV 600 V and Category IV 300 V standards for a higher level of safety
  • The optional TPAK magnetic hanger allows the user hands-free flexibility (sold separately)
-10%
Close

Fluke 114 True RMS Electrical Multimeter with AutoVolt, 600 V

$256.00 $230.00
Excluding GST 10%
  • Features a compact ergonomic design for one-handed operation
  • Comes with an holster with probe holders for easy storage
  • Features manual and automatic ranging
  • Safety rates CAT III 600 V
  • Fits into optional ToolPak™ magnetic hanger for hands-free operation
-10%
Close

Fluke 115 Field Technicians Digital Multimeter

$288.00 $259.00
Excluding GST 10%
  • Compact True-rms digital multimeter for field service
  • Includes: meter, holster, 4 mm silicone test lead set
  • Easy one-handed operation of the meter
  • Min/Max/Average to record signal fluctuations
-10%
Close

Fluke 116 Digital HVAC Multimeter

$455.00 $409.00
Excluding GST 10%
  • Measures resistance, continuity, frequency, and capacitance
  • Provides Min/Max/Average to record signal fluctuations
  • Comes with a holster with probe holders for easy storage
  • Features a compact ergonomic design for one-handed operation
  • Fits into optional ToolPak™ magnetic hanger for hands-free operation
  • CAT III 600 V safety rated
-10%
Close

Fluke 116/323 HVAC/R Combo Kit

$695.00 $625.00
Excluding GST 10%

Features Fluke 116 Offers

  • Built-in thermometer
  • Provides microamps to test flame sensors
  • Low input impedance to helps prevent false readings due to ghost voltage
  • Large white LED backlight for working in poorly lit areas
  • Measures resistance, continuity, frequency, and capacitance
  • Provides Min/Max/Average to record signal fluctuations
  • Compact ergonomic design for one-handed operation
  • Fits into optional ToolPak™ magnetic hanger for hands-free operation (sold separately)
  • CAT III 600 V safety rated

Features 323 True RMS Clamp Meter

  • Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A
  • Measures AC current to 400 A
  • Measures AC voltage and DC voltage to 600 V
  • Provides True RMS AC voltage and current for accurate measurements on non-linear signals
  • Measures resistance to 4 kΩ with continuity detection
  • Slim, ergonomic design for measuring in tight cable compartments
  • Presents measurements on a large, easy-to-read display
  • Hold function captures a reading on the display
  • CAT III 600 V, CAT IV 300 V safety rating

Features TL175 TwistGuard Test Leads Set

  • Patented TwistGuard™ extendable tip
  • New WearGuard™ lead wire wear indication
  • Double insulated silicone leads
  • Extra-heavy duty strain relief on both probe-end and plug-end
  • Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
  • Conforms to EN61010-031

Features TPAK ToolPak Magnetic Meter Hanger

  • Powerful magnetic hanger allows you to hang your meter on any metallic surfaces
  • 9″ (228.6 mm) hook and loop strap allows you to loop around pipeS
  • Hook hanger for hanging on non-magnetic surfaces
  • General purpose hanger allows you to hang your meter on nails, hooks and many other objects
  • Compatible with many Fluke instruments

Features 80BK-A Integrated DMM Temperature Probe

  • Standard shrouded banana jack
  • Convenient one piece construction

Features C115 Soft Carrying Case

  • 2 x padded pockets
  • Made out of durable polyester
-10%
Close

Fluke 116/323 KIT HVAC Combo Kit

$695.00 $625.00
Excluding GST 10%

Features

  • Fluke 116 HVAC Multimeter:
    • 600 V max between terminal and earth ground
    • 6 kV peak per IEC 61010-1 600 V CAT III
    • 6,000 count display
    • Display updates at 4/sec
  • Fluke 323 True RMS Clamp Meter:
    • 400 A ac current measurement
    • 600 V ac and dc voltage measurement
    • True-rms ac voltage and current
    • Resistance measurement to up to 40 kΩ
-10%
Close

Fluke 116/62 MAX+ Technician’s Combo Kit

$695.00 $625.00
Excluding GST 10%

Features

  • Fluke 116 HVAC Multimeter
    • Built-in thermometer for HVAC applications
    • Microamps to test flame sensors
    • Low input impedance helps prevent false readings due to ghost voltage
    • Work in poorly lit areas with the Large white LED backlit display
    • True-rms voltage and current for accurate measurements on non-linear loads
    • Measures 10 A directly (20 A overload for 30-seconds) without a current clamp
    • Resistance, continuity, frequency and capacitance
    • Record signal fluctuations using Min/Max/Average and elapsed time stamps
    • Easy to use with one hand
    • Hands free operation with optional magnetic hanger (ToolPak™)
    • CAT III 600 V safety rated
  • Fluke 62 MAX+ Infrared Thermometer
    • Measure -30°C to 650°C (-22°F to 1202°F)
    • Extremely accurate: up to +1.0°C or + 1.0% of reaching (Fluke 62 MAX+)
    • IP54 rating for water resistance and dust proof allow you to work rain or shine and even in the most dirty or dusty industrial sites
    • Strong enough to withstand a 3m drop. No worry even if you work from a ladder
    • Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box
    • Dual lasers: The 62 MAX+ has dual lasers to help you identify area to be measured
-10%
Close

Fluke 117 Electrician’s Multimeter

$363.00 $327.00
Excluding GST 10%
  • VoltAlert™ technology for non-contact voltage detection
  • AutoVolt automatic ac/dc voltage selection
  • LoZ: helps prevent false readings due to ghost voltage
  • Large white LED backlight to work in poorly lit areas
  • True-rms for accurate measurements on non-linear loads
  • Measures 10 A (20 A overload for 30 seconds)
  • Resistance, continuity, frequency and capacitance
  • Min/max/average to record signal fluctuations
  • Compatible with optional magnetic hanger (ToolPak™) for hands free operation
  • Accurate and easy-to-use
  • Provides low input impedance to help prevent false readings due to ghost voltage
  • CAT III 600 V safety rated
-10%
Close

Fluke 117/323 Electrician’s Combo Kit

$520.00 $468.00
Excluding GST 10%

Features

  • Fluke 117 electrician’s multimeter
    • VoltAlert™ technology for non-contact voltage detection.
    • AutoVolt automatic ac/dc voltage selection.
    • Low input impedance: Helps prevent false readings due to ghost voltage.
    • Large white LED backlight to work in poorly lit areas.
    • True-rms for accurate measurements on non-linear loads.
    • Measures 10 A (20 A overload for 30-seconds).
    • Resistance, continuity, frequency and capacitance.
    • Min/Max/Average to record signal fluctuations.
    • Compact ergonomic design for one-handed operation.
    • CAT III 600 V safety rated.
  • Fluke 323 clamp meter
    • 400 A ac current measurement.
    • 600 V ac and dc voltage measurement.
    • True-rms ac voltage and current for accurate measurements on non-linear signals.
    • Resistance measurement up to 40 kΩ with continuity detection.
    • Slim, ergonomic design.
    • CAT IV 300V/CAT III 600 V safety rating.
-10%
Close

Fluke 123B Industrial ScopeMeter® Hand-Held Oscilloscope, 20 MHz

$2,507.00 $2,256.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-10%
Close

Fluke 123B/S Industrial ScopeMeter Hand-Held Oscilloscope with the Fluke Vie software, 20 MHz

$3,027.00 $2,724.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz or 20 MHz oscilloscope bandwidth
  • Two 5000-count true-rms digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-10%
Close

Fluke 124B ScopeMeter Oscilloscope

$3,420.00 $3,078.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 or 40MHz bandwidth
    • 5mV to 200V/div sensitivity
  • VDC and true-rms VAC ranges from 500mV to 750V
    • 5000 count full scale reading
  • Up to 2200V peak (max, min, & peak-to-peak modes)
    • 5% FS accuracy (min or max), 10% (peak-to-peak)
    • 500 counts full scale reading
  • Up to 70MHz frequency for 124B & 125B
    • Up to 50MHz for 123B
  • Measure resistance, continuity, diode, & capacitance
  • CE & CSA approved, CAT IV 600V safety rated
-10%
Close

Fluke 124B/S Industrial ScopeMeter Hand-Held Oscilloscope with the Fluke View software, 40 MHz

$3,940.00 $3,546.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-10%
Close

Fluke 125B ScopeMeter Oscilloscope

$4,129.00 $3,716.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 or 40MHz bandwidth
    • 5mV to 200V/div sensitivity
  • VDC and true-rms VAC ranges from 500mV to 750V
    • 5000 count full scale reading
  • Up to 2200V peak (max, min, & peak-to-peak modes)
    • 5% FS accuracy (min or max), 10% (peak-to-peak)
    • 500 counts full scale reading
  • Up to 70MHz frequency for 124B & 125B
    • Up to 50MHz for 123B
  • Measure resistance, continuity, diode, & capacitance
  • CE & CSA approved, CAT IV 600V safety rated
-10%
Close

Fluke 125B/S Industrial ScopeMeter Hand-Held Oscilloscope with FlukeView software, 40 MHz

$4,649.00 $4,184.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
-10%
Close

Fluke 1503 Insulation Resistance Tester

$851.00 $766.00
Excluding GST 10%

Key features

  • A rugged, compact insulation resistance tester for residential and commercial electricians
  • Performs insulation tests from 0.01 MΩ to 2000 MΩ
  • Offers two insulation test voltages: 500 V and 1000 V
  • Includes live circuit detection to prevent insulation test if voltage >30 V is detected
  • Measures resistance from 0.01 Ω to 20.00 kΩ
-10%
Close

Fluke 1507 Insulation Resistance Tester

$1,093.00 $984.00
Excluding GST 10%

Key features

  • Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
  • Automatically calculates Polarization Index and Dielectric Absorption Ratio
  • Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
  • Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V