Showing 1–12 of 277 results

Show sidebar
-10%
Close

10200101 – Fluke Networks Spare Modular Adapter K-Plug 4/6-Wire Cords, Five Pack

Original price was: $99.00.Current price is: $89.00.
Excluding GST 10%

SPARE MODULAR ADAPTER K-PLUG 4/6-WIRE CORDS, FIVE PACK

  • 10200101 Spare Modular Adapter K-Plug 4/6-Wire Cords, Five Pack
  • Available in in-line or standard versions
  • Available with standard or ruggedized K-plug ends
-10%
Close

10230101 – Fluke Networks 8-Wire In-Line Modular Adapter with K-Plug

Original price was: $92.00.Current price is: $83.00.
Excluding GST 10%

Fluke Networks 10230101 8-Wire In-Line Modular Adapter with K-Plug

  • 10230101 8-Wire In-Line Modular Adapter with K-Plug
  • Available in in-line or standard versions
  • Available with standard or ruggedized K-plug ends
-10%
Close

26500610 – Fluke Networks TS100 Metric Cable Fault Finder

Original price was: $833.00.Current price is: $750.00.
Excluding GST 10%

Fluke Networks 26500610 TS100 Metric Cable Fault Finder with BNC to Alligator Clips

  • 26500610 TS100 Metric Cable Fault Finder
  • Works on any two or more conductor cable up to 3,000 feet (915 meters)
  • Instantly measures distance to open or any fault from one end of any cable pair
  • Patented SmartTone tone generator positively identifies pair
  • Measures cable distance on spool
  • Measures constantly while “On”
  • Displays distance reading rather than waveform
  • Large bright LED screen
  • One button operation
  • High voltage detection
  • Moisture proof
  • Additional line cord options available for coaxial cable (F-connectors) and other applications
-7%
Close

30800001 – Fluke Networks TS30 Test Set with Piercing Pin

Original price was: $580.00.Current price is: $539.00.
Excluding GST 10%

Fluke Networks 30800001 TS30 Telephone Test / Butt Set with Piercing PIN

  • TS30 Test Set with Piercing Pin
  • High impedance DataSafe operation in Monitor mode
  • DropSafe reliability passes 20 foot drop test
  • RainSafe protection in severe weather conditions
  • Mute switch
  • Last number redial
  • Audible ringer for callbacks
  • High impedance monitor mode
  • Automatic regulation of speech levels
  • Tone and pulse operation
  • Last number redial in tone and pulse modes
  • Hook flash button
  • Fully functional with either line polarity
  • Audible electronic ringer for call backs
  • High current and over voltage protection
-10%
Close

88-5 / 88V – Fluke Automotive Multimeter

Original price was: $1,177.00.Current price is: $1,059.00.
Excluding GST 10%

Product overview: Fluke 88V Deluxe Automotive Multimeter

The Fluke 88V meter has measurement functions, troubleshooting features, and accuracy levels needed to solve problems on conventional and hybrid vehicles. The 88V is the most powerful automotive multimeter ever offered by Fluke. In addition to standard multimeter features such as the ability to measure voltage, current, continuity, and resistance, the 88V can perform:

Pulse width

Duty cycle

Min/Max/Average recording

Diode tests

The pulse width function provides millisecond resolution for troubleshooting fuel injectors.

Automotive measurements

The 88V meter can take care of many automotive needs, getting into more of the digital multimeters measurement capabilities – it can measure voltage up to 1000 V AC and DC, current up to 10 A, 20 A for up to 30 seconds and frequency to 200 kHz and % duty cycle. Add those features to RPM measurements with optional inductive pickup and millisecond pulse width measurements for fuel injectors to name a few. The 88V comes packed with the functions you need:

Temperature measurements with optional temperature probe

Analog bar graph to track changing or unstable signals

Min/Max/Average recording with Min/Max Alert to capture variations automatically

Peak Min/Max to record transients as fast as 250 μs

88V multimeter designed for the garage

While working in a garage, the large display digits can help you focus on the vehicle while still being able to read the numbers. Plus, the two-level bright white backlight offers the additional visibility you may need.

An optional magnetic hanger lets you hang the meter from most steel surfaces for easy set-up and viewing. The 88V is designed to be used in high energy environments like those found on hybrid vehicles.

The product is supported by a limited lifetime warranty.

-11%
Close

DESMO LT240A15 – CAT IV Single Phase Loadtester

Original price was: $299.00.Current price is: $265.00.
Excluding GST 10%

Features & Benefits

  • Voltage: 240 – 250V max. 1Ø
  • Load: 1100W – 4.5amp.
  • Internal Fusing: 7amp.
  • Safety Rating: Cat IV 600V – Cat III 1000V.
  • Compliant to: AS: 61010.1: 2003.
  • Weight: 420gm.
  • Leads: Silicon with internal white wear indicator layer.
  • Test Probes: Cat III 1000V.
  • Motor: 1100W with thermal cut-out.
  • Grills: Black Nylon 15% Glass Filled.
  • Cable Grommet: TPE 90A Shore.
  • Body: PC-ABS Fire Retardant – spark finish.
  • Hook: Polished 316 S/S that allows hands free operation.
  • Product Code: LT240A15
Placeholder
Close

Fluke 1773 Power Quality Analyzer

$11,308.00
Excluding GST 10%

Fluke 1773 Offers

Make data capture as reliable and easy as possible with the power quality analyzer that features instrument powering from the measurement circuit, automatic connection check, and correction.

The 1773 Power Quality Analyzer replaces the discontinued 434-II Three-Phase Analyzer

Features

  • Automatically measure power and power quality parameters
  • Power system connection and instrument setup autocorrection
  • Instrument automatically detects error in voltage and current wiring, providing correction without rewiring
  • High resolution touchscreen
  • Capacitive touchscreen allows use with PPE (double gloved hands), providing clear results in seconds
  • Power quality health summary: automatically evaluate power quality inputs against the EN 50160 electrical standard, providing detailed troubleshooting of power quality problem areas
  • Harmonics: multiple methods of harmonic analysis provide users with the data they increasingly need with basic fundamental to 50 integer harmonics, 2 to 9 kHz for IEC61000-4-30 Annex A compliance and harmonics to 30 kHz harmonics to discover the effects of inverters on the network
  • Critical power quality data is captured as soon as you begin a session, without extensive setup or selections
  • Intuitive user interface makes it easy to navigate between measurement parameters like V/A/Hz, power, dips and swells, harmonics, or PQ health at the push of a button
  • Capture damaging high-speed transients so you can mitigate their effects before equipment fails
  • Analysis and reporting comes standard with Fluke Energy Analyze Plus software giving you the ability to create customized reports, or leverage built-in one-click reporting to industry standards like EN 50160, IEEE 519 and GOST 33073

Applications

  • Basic power studies
  • Basic power quality studies
  • Energy surveys
  • Load studies
  • Capture events
  • Harmonic surveys
Fluke 1700 Series application shot
Fluke 1700 Series application shot
Fluke 1700 Series application shot

Automatic measurements. More flexibility. Better power quality troubleshooting

The three-phase power quality analyzers eliminate the complexities of power quality logging, troubleshooting, and analysis. Engineered to be the faster, easier way to perform power quality studies, the 1770 Series offers automatic measurements, a straightforward user interface and setup, best-in-class specifications, and a simplified reporting platform. The instrument can also be powered directly from the measurement circuit, eliminating the need to find a power outlet or use a lengthy extension cord. With the 1770 Series you’ll never miss a critical power quality event—from fast transients up to 8 kV, harmonics up to 30 kHz, dips and swells, as well as the voltage, current, and power measurements that enable you to characterize your electrical system.

Automatic measurement capture

Whether you’re performing a quick system check or a detailed power quality study, consistent data is key. The power quality analyzer offers a unique automatic measurement capture system that helps ensure you’re collecting the right data every time, while still giving you the flexibility to select and adjust specific parameters as needed. More than 500 power quality parameters are captured by default and the guided setup makes it easy to select the right parameters for the system you’re working on. Logged data is instantly viewable, downloadable, and shareable with Fluke Energy Analyze Plus software so you never need to wait to finish a session before reviewing results or analyzing data.

Ultimate measurement confidence

The three-phase power quality analyzers are 2-in-1 devices that combine the troubleshooting functionality of a power quality meter with the robust analysis and logging capabilities of a standalone power quality analyzer—in a single, easy-to-use, handheld device.

The ‘PQ Meter’ function gives you immediate access to live onscreen data in the field so you can quickly identify potential problems while troubleshooting. The detailed ‘PQ Logging and Analysis’ function eliminates the complexity of performing power quality studies by guiding you through the setup process ensuring you’re capturing the right data every time. Couple these measurement modes with a unique measurement connection autocorrect function and you can be confident that you never need to worry about going back for a second measurement—even if you were unsure about what to look for when you started.

Fluke 1700 Series transient captureView real-time voltage transitory events while logging for faster troubleshooting

High-speed voltage transient capture

Transients negatively impact otherwise healthy systems every day and their potential to damage your equipment can’t be underestimated. Whether your system is experiencing impulsive or oscillatory transients, the results can be devastating and cause problems ranging from insulation failures to total equipment failures. The 1775 and 1777 incorporate advanced transient capture technology to help you clearly identify high-speed voltage transients, so you have the data you need to stop them in their tracks. The 1775 Power Quality Analyzer has 1MHz sampling capability to capture fast transients, while the 1777 Power Quality Analyzer has 20 MHz sampling capability to capture the fastest transients in high detail.

Fluke 1700 Series industrial systems capture A full range of harmonics are available from the first 50 integer harmonics and from 2 kHz to 30 kHz

From traditional industrial systems to renewable energy systems to electric vehicles, we’ve got you covered

The three-phase power quality analyzer was designed to be safe and easy to use in any measurement environment. The three-phase power quality analyzer allows you to capture a full range of power quality variables as well as high-speed waveforms, high-speed transients, and higher frequency harmonics, all of which are instantly viewable on the large, high-resolution screen. With a best-in-class CAT IV 600 V / CAT III 1000 V overvoltage rating, these analyzers can be used at the service entrance or downstream, measuring AC and DC inputs, and harmonics measuring up to 30 kHz. With the 1770 Series you can be confident that you’ll capture the data you need to make better maintenance decisions no matter the task.

Fluke 1700 Series large color touchscreenEasily navigate using the large color touchscreen

Work where, when, and how you want

No two days in the field are the same. You need a power quality analyzer that can go where you go and do what you need it to when you get there. With a full range of accessories and built-in features the 1770 Series makes it easier to get your job done. The slim ergonomic design and integrated hand strap make it easy to hold and the included hanging kit makes it easy to secure your analyzer inside a cabinet. The integrated internal power supply allows the unit to be powered directly from the measured circuit, while a 90-minute battery helps ensure you can still access and review data even when you aren’t connected to a live system.

Quickly and easily transfer data to your PC using the USB C, USB A, Ethernet, WiFi, cellular network support options, depending on your requirements. With an internal GPS module and an optional double insulated external antenna, you can time sync your data for more accurate troubleshooting and analysis.

Fluke 1700 Series harmonics limits capture Individual harmonics can be easily selected to view trend data as loads change

Calculate current harmonics limits

When downloading data from the 1770 Series Power Quality Analyzers the included Energy Analyze Plus software package can compare measured voltage and current harmonic statistical data to different standards, like EN 50160 or IEEE 519, to determine if they exceed compliance limits. This powerful predictive maintenance feature enables current harmonics to be observed before distortion appears in the voltage allowing you to prevent unexpected failures or non-compliance situations and increase system uptime. With the proliferation of inverter-based loads and power generation, keeping current harmonics in check is becoming increasingly critical to ensure reliable power quality and avoid system downtime.

Placeholder
Close

Fluke 1775 Power Quality Analyzer

$14,701.00
Excluding GST 10%

Fluke 1775 Offers

Make data capture as reliable and easy as possible with the power quality analyzer that features instrument powering from the measurement circuit, automatic connection check, and correction.

The 1775 Power Quality Analyzer replaces the discontinued 435-II Power Quality and Energy Analyzer

Features

  • Automatically measure power and power quality parameters
  • Power system connection and instrument setup autocorrection
  • Instrument automatically detects error in voltage and current wiring, providing correction without rewiring
  • High resolution touchscreen
  • Capacitive touchscreen allows use with PPE (double gloved hands), providing clear results in seconds
  • Power quality health summary: automatically evaluate power quality inputs against the EN 50160 electrical standard, providing detailed troubleshooting of power quality problem areas
  • Harmonics: multiple methods of harmonic analysis provide users with the data they increasingly need with basic fundamental to 50 integer harmonics, 2 to 9 kHz for IEC61000-4-30 Annex A compliance and harmonics to 30 kHz harmonics to discover the effects of inverters on the network
  • Critical power quality data is captured as soon as you begin a session, without extensive setup or selections
  • Intuitive user interface makes it easy to navigate between measurement parameters like V/A/Hz, power, dips and swells, harmonics, or PQ health at the push of a button
  • Capture damaging high-speed transients so you can mitigate their effects before equipment fails
  • Analysis and reporting comes standard with Fluke Energy Analyze Plus software giving you the ability to create customized reports, or leverage built-in one-click reporting to industry standards like EN 50160, IEEE 519 and GOST 33073

Applications

  • Basic power studies
  • Basic power quality studies
  • Advanced power studies
  • Advanced power quality studies
  • Energy surveys
  • Load studies
  • Capture events
  • View event waveform data on screen
  • Mains signal monitoring
  • Harmonic surveys
  • Nuisance circuit breaker tripping
  • Power utility power quality surveys
  • Discovery of equipment failures caused by transients
Fluke 1700 Series application shot
Fluke 1700 Series application shot
Fluke 1700 Series application shot

Automatic measurements. More flexibility. Better power quality troubleshooting

The three-phase power quality analyzers eliminate the complexities of power quality logging, troubleshooting, and analysis. Engineered to be the faster, easier way to perform power quality studies, the 1770 Series offers automatic measurements, a straightforward user interface and setup, best-in-class specifications, and a simplified reporting platform. The instrument can also be powered directly from the measurement circuit, eliminating the need to find a power outlet or use a lengthy extension cord. With the 1770 Series you’ll never miss a critical power quality event—from fast transients up to 8 kV, harmonics up to 30 kHz, dips and swells, as well as the voltage, current, and power measurements that enable you to characterize your electrical system.

Automatic measurement capture

Whether you’re performing a quick system check or a detailed power quality study, consistent data is key. The power quality analyzer offers a unique automatic measurement capture system that helps ensure you’re collecting the right data every time, while still giving you the flexibility to select and adjust specific parameters as needed. More than 500 power quality parameters are captured by default and the guided setup makes it easy to select the right parameters for the system you’re working on. Logged data is instantly viewable, downloadable, and shareable with Fluke Energy Analyze Plus software so you never need to wait to finish a session before reviewing results or analyzing data.

Ultimate measurement confidence

The three-phase power quality analyzers are 2-in-1 devices that combine the troubleshooting functionality of a power quality meter with the robust analysis and logging capabilities of a standalone power quality analyzer—in a single, easy-to-use, handheld device.

The ‘PQ Meter’ function gives you immediate access to live onscreen data in the field so you can quickly identify potential problems while troubleshooting. The detailed ‘PQ Logging and Analysis’ function eliminates the complexity of performing power quality studies by guiding you through the setup process ensuring you’re capturing the right data every time. Couple these measurement modes with a unique measurement connection autocorrect function and you can be confident that you never need to worry about going back for a second measurement—even if you were unsure about what to look for when you started.

Fluke 1700 Series transient captureView real-time voltage transitory events while logging for faster troubleshooting

High-speed voltage transient capture

Transients negatively impact otherwise healthy systems every day and their potential to damage your equipment can’t be underestimated. Whether your system is experiencing impulsive or oscillatory transients, the results can be devastating and cause problems ranging from insulation failures to total equipment failures. The 1775 and 1777 incorporate advanced transient capture technology to help you clearly identify high-speed voltage transients, so you have the data you need to stop them in their tracks. The 1775 Power Quality Analyzer has 1MHz sampling capability to capture fast transients, while the 1777 Power Quality Analyzer has 20 MHz sampling capability to capture the fastest transients in high detail.

Fluke 1700 Series industrial systems capture A full range of harmonics are available from the first 50 integer harmonics and from 2 kHz to 30 kHz

From traditional industrial systems to renewable energy systems to electric vehicles, we’ve got you covered

The three-phase power quality analyzer was designed to be safe and easy to use in any measurement environment. The three-phase power quality analyzer allows you to capture a full range of power quality variables as well as high-speed waveforms, high-speed transients, and higher frequency harmonics, all of which are instantly viewable on the large, high-resolution screen. With a best-in-class CAT IV 600 V / CAT III 1000 V overvoltage rating, these analyzers can be used at the service entrance or downstream, measuring AC and DC inputs, and harmonics measuring up to 30 kHz. With the 1770 Series you can be confident that you’ll capture the data you need to make better maintenance decisions no matter the task.

Fluke 1700 Series large color touchscreenEasily navigate using the large color touchscreen

Work where, when, and how you want

No two days in the field are the same. You need a power quality analyzer that can go where you go and do what you need it to when you get there. With a full range of accessories and built-in features the 1770 Series makes it easier to get your job done. The slim ergonomic design and integrated hand strap make it easy to hold and the included hanging kit makes it easy to secure your analyzer inside a cabinet. The integrated internal power supply allows the unit to be powered directly from the measured circuit, while a 90-minute battery helps ensure you can still access and review data even when you aren’t connected to a live system.

Quickly and easily transfer data to your PC using the USB C, USB A, Ethernet, WiFi, cellular network support options, depending on your requirements. With an internal GPS module and an optional double insulated external antenna, you can time sync your data for more accurate troubleshooting and analysis.

Fluke 1700 Series harmonics limits capture Individual harmonics can be easily selected to view trend data as loads change

Calculate current harmonics limits

When downloading data from the 1770 Series Power Quality Analyzers the included Energy Analyze Plus software package can compare measured voltage and current harmonic statistical data to different standards, like EN 50160 or IEEE 519, to determine if they exceed compliance limits. This powerful predictive maintenance feature enables current harmonics to be observed before distortion appears in the voltage allowing you to prevent unexpected failures or non-compliance situations and increase system uptime. With the proliferation of inverter-based loads and power generation, keeping current harmonics in check is becoming increasingly critical to ensure reliable power quality and avoid system downtime.

-10%
Placeholder
Close

Fluke 3130-G2M/C Portable Pneumatic Pressure Calibrator with Accredited Calibration

Original price was: $11,505.00.Current price is: $10,355.00.
Excluding GST 10%

 

Features

  • Measure and generate pressures from vacuum to 2 MPa (300 psi, 20 bar)
  • Internal pump can generate vacuum to -80 kPa (-12 psi, -0.8 bar) or pressure to 2 MPa (300 psi, 20 bar)
  • Supply pressure connection allowing the use of external gas supply up to 2 MPa (300 psi, 20 bar)
  • Includes variable volume for fine adjustment of pressures
  • Pressure measurement accuracy of 0.025% reading ±0.01% FS
  • Electrical measurement and 24 volt supply for close looped calibrations
  • Measure or generate 4 to 20 mA
  • Measure 0 to 30 V DC
  • Powered by internal, high capacity, NiMH battery or universal ac mains adapter
  • Compatible with the 700P Pressure Modules
-10%
Placeholder
Close

Fluke 6532-140M E DWT Electronic Deadweight Tester, 1.4 to 140 mPa, 200 to 20 000 PSI

Original price was: $77,451.00.Current price is: $69,706.00.
Excluding GST 10%

Fluke 6532-140M Offers

Features

  • No weights to load and unload, transport or send out for calibration
  • Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
  • No piston-cylinder changes
  • No significant sensitivity to level or vibration
  • Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
  • Operates in any unit of measure, switching easily from one unit to the next
Placeholder
Close

Fluke 720A Kelvin-Varley Divider

 

  • 0.1 ppm resolution, seven decades
  • 0.1 ppm of input absolute linearity
  • Built-in self calibration bridge
  • Front panel self-calibration
Placeholder
Close

Fluke 720A Kelvin-Varley Divider (Copy)

 

  • 0.1 ppm resolution, seven decades
  • 0.1 ppm of input absolute linearity
  • Built-in self calibration bridge
  • Front panel self-calibration