The Fluke Networks FiberFinder is a remote ID source for the SimpliFiber Pro. Enables mapping verification and easy documentation as well as double-ended testing with only one technician. Allows you to identify the physical location of cabling runs to ensure polarity and the correct location on each fiber drop.
View cart “LIQ-100 – Fluke Networks LinkIQ™ Cable+Network Tester” has been added to your cart.
-10%
Previous product
Back to products MS-POE-KIT - Fluke Networks MicroScanner™ PoE Cable Verifier Kit $2,453.00 Original price was: $2,453.00.$2,208.00Current price is: $2,208.00.
Excluding GST 10%
Next product
FINDFIBER-6 - Fluke Networks Six FindFiber Remote ID $2,958.00 Original price was: $2,958.00.$2,662.00Current price is: $2,662.00.
Excluding GST 10%
FINDFIBER – Fluke Networks FindFiber Source
$513.00 Original price was: $513.00.$462.00Current price is: $462.00.Excluding GST 10%
FindFiber Source
Available on backorder
SKU: 3327057 Category: Fluke Networks
Related products
-10%
Close
LIQ-100-IE – Fluke Networks LINKIQ™ Industrial Ethernet Tester
Excluding GST 10%
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
Fluke Networks PRO3000 Tone Generator and Probe Kit
Excluding GST 10%
Key features
- Send tone signal up to 10 miles (16 km) on most cables
- Analog tone generator with bed-of-nails clips, unfiltered probe
- SmartTone™ provides 5 distinct tones for exact pair identification
- Continuity testing and line polarity confirmation
- Ergonomic sleek design, 3.5 mm headphone jack
-15%
Close
FTK2100 – SF PRO PM & 2xSM Sources
Excluding GST 10%
Product Highlights
Simple-to-use fiber-loss tester with advanced time-saving features. Choose from various kits with configurations to meet your fiber verification, inspection, and cleaning needs.
- Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record
- Additional wavelengths of 1490 and 1625 nm
- CheckActive™ feature emits an audible tone and displays an icon when a live fiber is detected, eliminating the need to set up a measurement
- FindFiber™ Remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fiber link to match color combinations
LIQ-100 – Fluke Networks LinkIQ™ Cable+Network Tester
Excluding GST 10%
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
-10%
Close
10051100 – Fluke Networks D914 Impact Tool With Eversharp 66 Blade
Excluding GST 10%
The D914 Impact Tool is the only punchdown tool to combine torque and impact. It combines two versatile tools, the
-10%
Close
TS54-A-09-TDR – Fluke Networks Test Set, TDR, ABN with Piercing Pin
Excluding GST 10%
- Headset Compatible
- Highly Portable
- Familiar Cell Phone Menu (Contacts, etc)
- No-Reverse Battery Design
-10%
Close
P4480008 – Fluke Networks TS52/44/42 Replacement Line Cord with Angled Bed-of-Nails Clips Only
Excluding GST 10%
- TS52/44/42 Replacement Cord with ABN only Clips
- ABN clips allow access to individual wire pairs
- Replaces damaged or inoperative line cords for proper test set operation
- Compatible with TS52 and TS40 Series Test Sets
-10%
Close
DSX2-8000 AP – 2Ghz Fluke Networks Cable Analyzer
Excluding GST 10%
- DSX-8000 Cable Analyzer
- Accelerates every step of the copper certification process
- Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
- Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
- ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
- Taptive™ user interface simplifies set-up, and eliminates errors
- Analyze test results and create professional test reports using LinkWare™ management software
- Graphically displays the source of failures including