“Fluke 190 Series II  500MHz 2 Channel ScopeMeter Oscilloscope” has been added to your cart. View cart	
		
			
					Previous product
					
						
							
							
					
				
				
							Back to products
		
								
								
									Fluke SW90W FlukeView ScopeMeter Software								
								
									$729.00
						Excluding GST 10%
					Next product
					
						
							
							
					
				
							
								
									Fluke SP12OB Screen Protector For 120B Series								
								
									$86.00
						Excluding GST 10%
Fluke STL120-IV Shielded Test Lead Set, 600 V, CAT IV
$451.00Excluding GST 10%
Fluke STL120-IV Specifications
- Bandwidth – 12.5 MHz
- Maximum Signal Voltage – 600 V rms CAT III per IEC 1010-2-031
- Maximum Voltage to Ground – 600 V rms CAT III per IEC 1010-2-031
- Maximum Current – 1 A
- Length – 48″ (1.2 m)
Available on backorder
	
	
		SKU: 4744340
	
	Categories: Fluke Industrial, Scope Meters
	
	
						Related products
Fluke 190 Series II 200MHz 2 Channel ScopeMeter Oscilloscope
			
	$6,506.00
	Excluding GST 10%
Features
- Four independent isolated input channels
- 60, 100, 200 and 500 MHz bandwidths
- Sample rate: Up to 2.5 GS/s
- Sample rate resolution: Up to 400 ps
- Deep memory: 10,000 point per trace waveform capture
- CAT III 1000 V / CAT IV 600 V safety rating
- Seven hour, high performance Li-ion batteries
- Battery door for convenient battery access
- Isolated USB ports for memory devices and PC connectivity
Fluke 125B ScopeMeter Oscilloscope
			
	$4,129.00
	Excluding GST 10%
Features
- Dual-input digital oscilloscope and multimeter
- 20 or 40MHz bandwidth
- 5mV to 200V/div sensitivity
 
- VDC and true-rms VAC ranges from 500mV to 750V
- 5000 count full scale reading
 
- Up to 2200V peak (max, min, & peak-to-peak modes)
- 5% FS accuracy (min or max), 10% (peak-to-peak)
- 500 counts full scale reading
 
- Up to 70MHz frequency for 124B & 125B
- Up to 50MHz for 123B
 
- Measure resistance, continuity, diode, & capacitance
- CE & CSA approved, CAT IV 600V safety rated
Fluke 805 FC Vibration Meter
			
	$2,499.00
	Excluding GST 10%
Features
- Low frequency range:10 Hz to 1,000 Hz
- High frequency range: 4,000 Hz to 20,000 Hz
- Crest Factor+ technology
- Four-level severity scale
- Exportable data via USB
- Trending in Microsoft® Excel using built-in templates
- Saves up to 3,500 measurements
- Compatible with Fluke Connect Mobile App
Fluke 1663 Multifunction Installation Tester
			
	$2,837.00
	Excluding GST 10%
Features
- 500V AC/DC voltage measurement TRMS
- 0.1V resolution & 3.3MΩ input impedance
- 660V RMS overload protection
 
- 20, 200, & 2000Ω auto-ranging continuity test
- 0.01, 0.1, & 1Ω resolution
- >4V open circuit voltage
- L-N, L-PE, N-PE inputs
 
- 50, 100, 250, 500, & 1000V insulation test voltages
- Test smooth DC sensitive RCDs (Type B/B+)
- 200 & 2000Ω earth resistance test
- 0.1 & 1Ω resolution
- 125Hz frequency & 25V output voltage
 
- On/Off switchable auto-start for RCD & Looptest
- Time & date (with optional FlukeView software)
- IP40 rated housing
- Complies with IEC/EN, UL, ANSI/ISA, & CAN/CSA
Fluke 6500-2 Portable Appliance Tester
			
	$4,499.00
	Excluding GST 10%
Key features
Fluke Simplifies Portable Appliance Testing
- Dedicated key for each test for ‘one-touch’ testing
- Pre-set pass/fail levels to save time
- Large backlit display for easy reading
- Single mains socket for appliance connection
- Separate IEC socket for easy mains/extension lead testing
- Detachable test leads for quick field replacement
- Integral carrying handle
- USB port for data transfer
Fluke TL175 TwistGuard Test Leads
			
	$76.00
	Excluding GST 10%
Features
- Extra-heavy duty strain relief on probe and plug
- Tested beyond 30,000 bends without failure
 
- -4 to 131°F (-20 to 55°C) operating temp
- Altitude of 6562ft (2000m)
 
- CAT II 1000V, CAT III 1000V, CAT IV 600V rated
- 10A max, Pollution Degree 2
 
- Conforms to EN61010-031
- 1-year warranty
Fluke 1507 Insulation Resistance Tester
			
	$1,140.00
	Excluding GST 10%
Key features
- Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
- Automatically calculates Polarization Index and Dielectric Absorption Ratio
- Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
- Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V
Fluke 810 Vibration Tester
			
	$15,767.00
	Excluding GST 10%
Features
- Plain-text diagnosis of standard faults:
- Unbalance
- Looseness
- Misalignment
- Bearing failures
 
- Fault severity (slight, moderate, serious, extreme)
- 200 rpm to 12000 rpm machine rotational speed range
- 5 Hz to 20 kHz Usable frequency bandwidth
- 2.56 kHz to 51.2 kHz sampling rate
- Lithium-ion, 14.8 V, 2.55 Ah battery
- 1/4 VGA, 320 × 240 color display
- Auto ranging
 
					
 
								 
								 
	 
				 
	 
				 
	 
				 
	 
				 
	 
				 
	 
				 
	 
				 
	 
				










