With a controlled custom microprocessor, the tester is designed to provide high levels of accuracy and reliability. IEC 61557 compliant, the device measures low loop resistance and features a large custom digital display, a readout voltage measurement function, and an automatic lock-out if the resister overheats
Previous product
Back to products
Kyoritsu 4105A-H Ground Resistance Tester, Digital, 2000Ω
$950.00
Excluding GST 10%
Next product
Kyoritsu 1062 MEAN/RMS Switch Multimeter, 1000V
$1,250.00
Excluding GST 10%
Kyoritsu 4118A LOOP/PFC/PSC Tester, 20/200/2000 Ω, 195 to 253 V/50 Hz
$850.00Excluding GST 10%
Features
- Custom microprocessor controlled for highest accuracy and reliability
- 3 LED’s for checking correct wiring status
- Direct reading of Prospective Short Circuit Current (PSC)
- Safe voltage measurement function
Related products
Close
Kyoritsu 8035 Non-Contact Safety Phase Indicator, 70 to 1000 V AC
Features
- Innovative technology permits safe, contact-free testing
- The insulated crocodile clips can clip insulated cables from Ø0.09 to 1.18″ (2.4 to 30 mm)
- Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones
- Can be fixed to a metal panel via the magnet on the back side
- Wide measuring range for three-phase installations from 70 to 1000 V AC
- Complies with IEC 61010-1 CAT 600 V and CAT 1000 V
Close
Kyoritsu 3125A 5kV Digital Insulation tester
Features
- Insulation Resistance up to 1TΩ
- Short-Circuit Current up to 1.5mA
- Wide Test Voltage from 250V to 5000V
- Diagnosis Function of PI and DAR
- Newly-designed alligator clip
- It comes with a tough hard case
- Filter function reduces noise interference for obtaining stable measurement
- Large display with Bar Graph indication and backlight
- Live voltage warning
- Safety standard IEC 61010-1 CAT IV 300V/CAT III 600V
Close
Kyoritsu KEW6516BT Multi-Function Tester with Bluetooth
Features
- Color LCD 3.5″ dot matrix
- Anti-trip technology (with 2 and 3 wire) for no trip LOOP L-PE testing on all RCDs
- With 2 wires only, very useful in case of no neutral (i.e. three-phase motor lines)
- High test current range of 2 Ω with 0.001 Ω resolution
- Zs Limit compares the values required by electrical installations standard with measured results
- Type AC, A, F, B (General and Selective), EV and Variable RCDs
- Single and auto test, ramp test and contact voltage
- Earth resistance test 2 and 3 wires with all accessories included
Close
Kyoritsu 6010B Multifunction Electrical Tester
Features
- Continuity 20/200 Ω 200 mA Test Current
- Insulation 500/1000 V, 20/200 MΩ 1 mA Rated Test Current
- Loop Impedance 20/2000 Ω 15mA Test Current at 2000 Ω (No RCD Trip)
- RCD 10/30/100/300/500mA x1/2, x1, Fast Trip (40 ms), DC, Auto Ramp
- Uc (Contact Voltage) 100 V
- Designed to IEC 61010-1, IEC 61557
- Data Memory: 300 measured results
- Download Results to PC by Using 8212 Data Communication Adapter through Optical RS-232C Port
Close
Kyoritsu 2012RA Digital Multimeter
Features:
- Continuous measuring time
- Applicable standards IEC 61010-1 CAT III 300V, CAT II 600V Pollution degree 2; IEC 61010-031 IEC 61010-2-032 IEC 61326
- Continuity buzzer
Close
Kyoritsu 6315-04 Power Quality Analyzer
Features
- Helpful support functions: Quick start guide, wiring check and sensor detection for easy and reliable measurement
- Measurement with high accuracy: Guaranteed accuracy: ±0.3%rdg (energy), ±0.2%rdg (voltage/ current); Complies with the international standard IEC 61000-4-30 class S and the european standard EN50160
- Remote monitoring on PC and Android device: Remote checking of measurement in real-time is possible via Bluetooth communication; Recorded data can be saved in the supplied SD card; EN50160 report can be generated after survey by PC software
- Various clamp current sensors: Various types of clamp and flexible sensors are available from 1000 mA range up to 3000 A range and earth leakage measurements; Energy consumption check on site, trend and demand graphs for easy recognition, TFT color display with high resolution
- IEC 61010-1 CAT IV 300 V, CAT III 600 V, CAT II 1000 V
Close
Kyoritsu 1021R Digital Multimeter
Features:
- Elegant and easy-to-use cabinet
- Large display with 6000 counts and Backlight
- Enhanced current measuring function using an external clamp sensor
- Two detachable holders, flat and wing type
- Accurate reading with True RMS
- Safety Standard IEC 61010-1 CAT IV 300V / CAT III 600V
Close
Kyoritsu 2046R True RMS AC/DC Digital Clamp Meter, 600A/600V
Features
- 600V input protection
- Sleep function saves battery life
- NCV function detects the presence of voltage in an electrical circuit or equipment without touching them
- Temperature measurement with optional k-type temperature probe
- Continuity & diode check
- Capacity measurement
- Peak hold function for peak value measurements on inrush currents (only at AC A range)
