Previous product 
Back to products MS2-FTK - Fluke Networks Copper/Fiber Basic Technicians Kit (MS2-100 + FTK-1000) Original price was: $5,744.00.$5,170.00Current price is: $5,170.00.
Excluding GST 10%
Next product 
Fluke 9133 - Portable Infrared (IR) Temperature Calibrator with Dry Gas Purge, -30°C Original price was: $11,602.00.$10,500.00Current price is: $10,500.00.
Excluding GST 10%
MICRO-DIT – Fluke Networks MicroScanner Kit Soft Carry Duffle
Original price was: $159.00.$151.00Current price is: $151.00.Excluding GST 10%
Fluke Networks MICRO-DIT Micro IT Kit Soft Carry Duffle
- Soft case
- For CIQ-KIT and MS2-KIT
Available on backorder
Related products
-10%
Close
LIQ-100-IE – Fluke Networks LINKIQ™ Industrial Ethernet Tester
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
LIQ-KIT – Fluke Networks LinkIQ Cable+Network Tester Kit
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
PRO3000F50-KIT – Fluke Networks 50HZ Filter & Tone Generator Kit
Product Highlights
Pro3000 Series Tone & Probe Kits tone and trace inactive wiring.
- Clear – Innovative filter technology blocks interference (“buzz”) that makes tracing difficult (“F” models only)
- Precise – SmartTone™ technology provides five distinct tones for exact pair identification
- Sends loud tone up to 10 miles (16 kilometers) on most cables
- Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures
- Angled bed-of-nails clips allow easy access to individual pairs
Fluke Networks PRO3000 Tone Generator and Probe Kit
Key features
- Send tone signal up to 10 miles (16 km) on most cables
- Analog tone generator with bed-of-nails clips, unfiltered probe
- SmartTone™ provides 5 distinct tones for exact pair identification
- Continuity testing and line polarity confirmation
- Ergonomic sleek design, 3.5 mm headphone jack
-10%
Close
FTK1200 – Simplifiber PRO Multimode Fiber Verification Kit
Product Highlights
Simple-to-use fiber-loss tester with advanced time-saving features. Choose from various kits with configurations to meet your fiber verification, inspection, and cleaning needs.
- Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record
- Additional wavelengths of 1490 and 1625 nm
- CheckActive™ feature emits an audible tone and displays an icon when a live fiber is detected, eliminating the need to set up a measurement
- FindFiber™ Remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fiber link to match color combinations
LIQ-100 – Fluke Networks LinkIQ™ Cable+Network Tester
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
LIQ-KIT-IE – Fluke Networks LINKIQ™ Industrial Ethernet Kit
Key Features
Cable testing you trust. Network testing you need.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Supports Industrial Ethernet (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
-10%
Close
PTNX8 – Fluke Networks Pocket Toner NX8
Fluke Networks PTNX8 Pocket Toner NX8 Advanced Coax Cable Tester
- PTNX8 Pocket Toner NX8
- 8 ID caps with built-in LED (available with the Cable, CT, DLX and VV-Pro kits)*
- Beeps when line condition changes
- Displays 5 different test results
- Low voltage circuit protection
- Removable bi-gender toner unit with Speed 81
- Auto shut off
- Replaceable parts
- Uses one AAA battery
- Low voltage protection for both the main body and detachable toner unit
- Dual audible indicators
- Bi-gender adaptable toner section
- Removable push-on connector
- Removable Speed 81 connector
- Lightweight, durable anodized aluminum
