Search Results for: fluke
Fluke PM200-A100K Pressure Measurement Module, 100 kPa (15 psi) absolute
What’s included with the Fluke PM200-A100K
- Fluke PM200-A100K Pressure Measurement Module, 100 kPa (15 psi) absolute
Fluke PM200-BG35K Pressure Measurement Module, -35 to 35 kPa (-5 to 5 psi) gauge
What’s included with the Fluke PM200-BG35K
- Fluke PM200-BG35K Pressure Measurement Module, -35 to 35 kPa (-5 to 5 psi) gauge
Fluke PM200-BG2.5K Pressure Measurement Module, -2.5 to 2.5 kPa (-10 to 10 inH2O)
What’s included with the Fluke PM200-BG2.5K
- Fluke PM200-BG2.5K Pressure Measurement Module, -2.5 to 2.5 kPa (-10 to 10 inH2O)
Fluke 6532-140M E DWT Electronic Deadweight Tester, 1.4 to 140 mPa, 200 to 20 000 PSI
Fluke 6532-140M Offers
Features
- No weights to load and unload, transport or send out for calibration
- Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes
- No significant sensitivity to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- Operates in any unit of measure, switching easily from one unit to the next
Fluke 6532-70M E DWT Electronic Deadweight Tester, 0.7 to 70 mPa, 100 to 10 000 PSI
Fluke 6532-70M Offers
Features
- No weights to load and unload, transport or send out for calibration
- Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes
- No significant sensitivity to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- Operates in any unit of measure, switching easily from one unit to the next
Fluke 6531-140M E DWT Electronic Deadweight Tester, 140 mPa, 20K PSI
Fluke 6531-140M Offers
Features
- No weights to load and unload, transport or send out for calibration
- Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes
- No significant sensitivity to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- Operates in any unit of measure, switching easily from one unit to the next
Fluke 6531-70M E DWT Electronic Deadweight Tester, 70 mPa, 10K PSI
Fluke 6531-70M Offers
Features
- No weights to load and unload, transport or send out for calibration
- Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes
- No significant sensitivity to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- Operates in any unit of measure, switching easily from one unit to the next
Fluke 6531-70M E DWT Electronic Deadweight Tester, 70 mPa, 10K PSI
Fluke 6531-70M Offers
Features
- No weights to load and unload, transport or send out for calibration
- Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes
- No significant sensitivity to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- Operates in any unit of measure, switching easily from one unit to the next
Fluke 6531-40M E DWT Electronic Deadweight Tester, 40 mPa, 6K PSI
Fluke 6531-40M Offers
Features
- No weights to load and unload, transport or send out for calibration
- Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes
- No significant sensitivity to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- Operates in any unit of measure, switching easily from one unit to the next
Fluke 6531-20M E DWT Electronic Deadweight Tester, 20 mPa, 3K PSI
Fluke 6531-20M Offers
Features
- No weights to load and unload, transport or send out for calibration
- Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes
- No significant sensitivity to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- Operates in any unit of measure, switching easily from one unit to the next
Fluke 6531-14M E DWT Electronic Deadweight Tester, 14 mPa, 2K PSI
Fluke 6531-14M Offers
Features
- No weights to load and unload, transport or send out for calibration
- Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes
- No significant sensitivity to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- Operates in any unit of measure, switching easily from one unit to the next
Fluke 6531-7M E DWT Electronic Deadweight Tester, 7 mPa, 1K PSI
Fluke 6531-7M Offers
Features
- No weights to load and unload, transport or send out for calibration
- Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes
- No significant sensitivity to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- Operates in any unit of measure, switching easily from one unit to the next
Fluke TL2X4W-PT7 2 x 4 Wire Ohms Test Lead, 1000V
Fluke TL2X4W-PT7 Offers
Features
- Two conductors per lead (one source and one measure)
- Perform 4 wire measurements with only two test leads
- 1000 volts maximum voltage between test lead and ground
- 1000 volts maximum transient over voltage and input voltage combined
Fluke Y8846D Rack Mount Kit
Fluke Y8846D Offers
Parts list:
2 Small filler plate
1 Rack mount tray
1 Dual center mount
2 #8-32 x 1/2 in panhead Philips screws
2 #6-32 x 1/4 in panhead Philips screws
4 #10-32 x 3/4 in Philips rack screws
2 #6-32 x 1/2 in panhead Philips screws
4 #10-32 rack nuts
Fluke 8845A-EFPT Fine Point Extended Test Probe Adaptor Set
Fluke 8845A-EFPT Offers
- One pair (red and black)
- Snaps onto DMM probes with .080 in (2 mm) O.D. Tips
- Designed to IEC 1010 standard
- Adapter allows access to hard-to-reach test points
- Tips are insulated to the point to prevent shorting of adjacent components
Fluke 8845A-TPIT Test Probe IC Tip Set
Fluke 8845A-TPIT Offers
- One pair (red and black)
- Snaps onto DMM probes with .080 in (2 mm) O.D. Tips
- Designed to IEC 1010 standard
- Pin tip jack at the adapter end is recessed for added insulation protection
- Adapter allows easy access to leads of through-hole IC’s
- Insulation at the tip fits between leads to prevent accidental shorting
Fluke TL2X4W-TWZ
Fluke TL2X4W-TWZ Offers
2X4 WIRE OHMS SMD TEST TWEEZER
Fluke 884x-CASE Molded Plastic Carrying Case for the 8845A and 8846A
What’s included with the Fluke 884X-CASE
- Carrying Case
- One-Year Warranty
Fluke 884X-1G USB Memory 1 GB
Fluke 884X-1G Offers
- Used on the 8846A only
- Plugs into USB device host port on the 8846A front panel
- Fully compliant with Universal Serial Bus Specification v2.0
- Dual LED indicates power and busy status
Fluke Y8846S Rack Mount Kit
Fluke Y8846S Offers
Y8846S allows meter to be mounted in a standard 19-inch rack
Parts list
Quantity Description
1 Small filler plate
1 Large filler plate
1 Large filler plate bracket
1 Rack mount tray
2 #8-32 x 1/2 in panhead Philips screws
1 #6-32 x 1/4 in panhead Philips screws
4 #10-32 x 3/4 in Philips rack screws
1 #6-32 x 1/2 in panhead Philips screws
4 #10-32 rack nuts
Fluke 884X-USB USB to RS-232 Cable Adapter
Fluke 884X-USB Offers
- USB to serial RS-232 interface adapter cable
- Converts from standard DB 9-pin serial to USB 2.0
- Requires an available PC communications port
- Includes cable and USB driver disk (CD-ROM)
Fluke 884X-RTD 100 Ohm RTD Temperature Probe
Fluke 884X-RTD Offers
Mineral-insulated sheath with a minimum bend radius of 19 mm (3/4 in) for flexibility and durability
Fluke Y525 Rack Mount Kit
What’s included with the Fluke Y525
- Fluke Y525 Rack Mount Kit
Fluke Y8022 Shielded IEEE 488 Cable, 2M
What’s included with the Fluke Y8022
- Fluke Y8022 Shielded IEEE 488 Cable, 2M
Fluke Y8021 Shielded IEEE 488 Cable, 1M
What’s included with the Fluke Y8021
- Fluke Y8021 Shielded IEEE 488 Cable, 1M
Fluke RS43 Serial Interface Cable
Fluke RS43 Offers
Cable has DB9 to DB9 plugs and features a 6′ Cable. For connecting the unit to a PC.
Fluke Networks CIQ-WM CABLEIQ Wiremap Adapter
Fluke Networks CIQ-WM CableIQ Wiremap Adapter
- CIQ-WM CABLEIQ Wiremap Adapter
- Works only with Cable IQ
Fluke Networks CIQ-WM CABLEIQ Wiremap Adapter
Fluke Networks CIQ-WM CableIQ Wiremap Adapter
- CIQ-WM CABLEIQ Wiremap Adapter
- Works only with Cable IQ
Fluke Networks CIQ-SPKR CableIQ Speaker Wire Adapter
Fluke Networks CIQ-SPKR CableIQ Speaker Wire Adapter
- CIQ-SPKR CableIQ Speaker Wire Adapter
Fluke Networks CIQ-RJA CABLEIQ RJ45/11 Modular Adaptor
Fluke Networks CIQ-RJA CableIQ RJ45/11 Modular Adaptor
- CIQ-RJA CABLEIQ RJ45/11 Modular Adaptor
Fluke Networks CIQ-KRQ CableIQ Residential Qualifier Kit
Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP).
- Works on live networks to provide Ethernet switch detection and device configuration
- Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
- Advanced troubleshooting diagnostics
- Core troubleshooting features
- Tests all copper cabling media
- Locate and trace cables with digital toning technology.
Fluke Networks CIQ-IDK57 CableIQ Remote Identifier Kit, Numbers 5-7
Fluke Networks CIQ-IDK57 CableIQ Remote Identifier Kit, 5-7 Identifers
- CIQ-IDK57 CableIQ Remote Identifier Kit
- Includes Remote Identifier Numbers 5-7
Fluke Networks CIQ-IDK24 CableIQ Remote Identifier Kit, Numbers 2-4
Fluke Networks CIQ-IDK24 CableIQ Remote Identifier Kit, 2-4 Identifers
- CIQ-IDK24 CableIQ Remote Identifier Kit, Includes Remote Identifier Numbers 2-4
Fluke Networks CIQ-COAX CABLEIQ COAX Adaptor Kit
Fluke Networks CIQ-COAX CableIQ Coaxial Adaptor Kit
CIQ-COAX CABLEIQ COAX Adaptor Kit
Includes F Connector, BNC and RCA Connectors
Fluke SMC-9-FCAPC/FCAPC – SM 9UM Launch Cord (160M)
SM 9UM LAUNCH CORD (160M) FOR FCAPC/FCAPC
SM 9UM Launch cord (160M)
For FCAPC/FCAP