Showing 1–9 of 190 results

Show sidebar

Fluke 2271A Industrial Pressure Calibrator

  • Calibrate a wide range of gauges and sensors with a single instrument
  • Two levels of accuracy, 0.01% reading or 0.02% FS
  • Wide measurement range from -100 kPa to 20 MPa (-15 to 3000 psi)
  • Removable pressure measurement modules make it easy to change or add measurement ranges
  • Integrated electrical measurement module with HART communication provides a complete solution for calibrating pressure transmitters
  • Built-in dual test ports enable you to connect multiple devices under test (DUTs)
  • Localized graphical user interface in choice of ten languages

Fluke 2456 Piston Gauge Monitor

  • Automates piston gauge calibrations
  • Monitors critical piston gauge parameters
  • Dual channel capability for cross float calibrations
  • WinPrompt software is Windows based
  • Use WinPrompt alone or in combination with Model 2456 PGM
  • Export data to create customized calibration reports and certificates

Fluke 2465A Gas Piston Gauge

  • Pressure ranges from 1.4 kPa to 7 MPa (0.2 to 1000 psi)
  • Accuracy to 0.0010% (10 ppm) of reading for pressures to 700 kPa (100 psi)
  • Accuracy to 0.0027% (27 ppm) of reading for pressures
    greater than 700 kPa to 7 MPa (100 psi to 1000 psi)
  • Precision better than 3 ppm
  • Stability better than 3 ppm per year
  • Resolution 0.0001% (1 ppm) or 1 mg
  • Gauge, absolute, vacuum and low pressure modes

Fluke 2468A – Pitot/Static Primary Standard

  • Pressure range: 0.4 to 103 inHg
  • Optional range: 3.4 to 400 inHg
  • Accuracy to ±0.5 feet, 0.003 knots
  • Ideal for calibrating RVSM compliant test sets
  • Absolute and gauge calibration for Ps, Pt & Qc ranges
  • Calibrate in a variety of units

Fluke 2700G Series Reference Pressure Gauges

  • Precision pressure measurement from 100 kPa (15 psi, 1 bar) to 70 MPa (10 000 psi, 700 bar)
  • Accuracy to 0.02% of full scale
  • Easy-to-use, rugged construction for reliable performance
  • Combine with the 700PTPK or 700HTPK pump kits for a complete portable pressure testing solution for up to 600 psi with the PTP-1 pneumatic pump and up to 10 000 psi with the HTP-2 hydraulic pump
  • Combine with the P5510, P5513, P5514, or P5515 Comparison Test Pumps for a complete bench top pressure calibration solution
  • Test port is 1/4 NPT Male. 1/4 BSP and M20 X 1.5 adaptors are included standard
  • USB communications cable and universal power supply provided standard
  • Can be used with COMPASS® for Pressure software for automated recording of pressure calibration data

Fluke 3990 Manual Pressure Control Packs

  • Self-contained for ease-of-use
  • Includes precision adjustor to allow increments as fine as 0.00025 psi
  • 1000 and 3000 psi models also provide absolute and negative gauge mode
  • Includes metering valve for fine control
  • Vent valve provides easy means to vent pressure to atmosphere
  • Convenient 1/4 inch NPT connections

Fluke 6270A Pressure Controller / Calibrator

  • Unsurpassed rangeability in one pressure controller / calibrator: install up to five measurement modules with uncertainty as good as 0.01% reading from 30% to 100% of the modules’ span.
  • Configure for today’s requirements, expand later as your needs change and grow. Add modules to increase the pressure range or accuracy in seconds, without needing to return the instrument to the factory.
  • Optional contamination prevention system helps you avoid risk of contaminating your pressure standard when calibrating hydraulic devices.

Fluke 6531, 6532 E-DWT Electronic Deadweight Tester Kits

  • No weights to load and unload, transport or send out for calibration
  • Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
  • No piston-cylinder changes
  • No significant sensitivity to level or vibration
  • Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
  • Operates in any unit of measure, switching easily from one unit to the next

Fluke 700-IV Current Shunt

Excluding GST 10%

Fluke 700-IV Offers

The Fluke 700-IV Current Shunt is used with the 741 or 743 Documenting Process Calibrator to measure and source current simultaneously.


  • Input current range: 0 to 55 mA DC
  • Conversion factor: 1 mA in converts to 10 mV out
  • Accuracy (Note): ±0.025% of input
  • Calibration interval: 1 year
  • Input resistance: 250Ω Nominal
  • Output resistance: 10Ω Nominal
  • Maximum voltage input: 30V DC