Showing 13–24 of 30 results

Show sidebar
-10%
Close

Fluke 714B Temperature Calibrator

Original price was: $2,984.00.Current price is: $2,686.00.
Excluding GST 10%

Features

  • Measure and simulate 17 different thermocouple types
  • Measure 4 to 20 mA signals while simultaneously sourcing a temperature signal
  • Configurable 0 % and 100 % source settings
  • Linear ramp and 25 % step auto ramp
  • Dual inputs and backlit display
  • Power down settings
  • Max voltage applied between terminal and earth: 30V
  • Operating temp: 14 to 122°F (-10 to 50°C)
  • Hanging tool designed in and included with every unit
-10%
Close

Fluke 715 Volt/mA Loop Calibrator

Original price was: $2,846.00.Current price is: $2,561.00.
Excluding GST 10%

Key features

  • Compact, lightweight mA calibrator for measuring loop current (0-20 mA, 4-20 mA) signals
  • Delivers very high accuracy—0.01%—and 1 mA resolution
  • Measures voltage output process signals from PLCs and transmitters
  • Sources or simulates 24 mA loop current
  • Sources voltage to 100 mV or 10V
  • Provides typical 18 hour battery life
Close

Fluke 718Ex Pressure Calibrator

$6,663.00
Excluding GST 10%

Features

  • ATEX II 1G Ex ia IIC T4 Compliant
  • Built-in pressure / vacuum hand pump, with fine adjust vernier and bleed valve
  • 30, 100, and 300 psi ranges (2, 7, and 20 bar)
  • Pressure measurement to 0.05% of full span, using an internal pressure sensor
  • Pressure measurement to 200 bar using any of eight intrinsically safe Fluke 700PEx Pressure Modules
  • Wide range of selectable measurement units for pressure
  • Current measurement with 0.02% accuracy and 0.001 mA resolution
  • Pressure switch test function
  • Min-Max Hold functions
  • Compact size and weight
  • Simple, push-button user interface
  • Rugged and reliable, ideal for field use
-10%
Close

Fluke 719Pro Electric Pressure Calibrator

Original price was: $8,739.00.Current price is: $7,865.00.
Excluding GST 10%

Features

  • Electric pump for one handed pressure calibration
  • Best in class pressure measurement uncertainty of 0.025%
  • Measure and source mA with best in class 0.015% accuracy
  • Precision pressure adjust vernier for accurate pressure calibration
  • Variable release rate bleed valve for easy pressure adjustment
  • Programmable pressure calibrator pump limit: eliminates over-pressurization and allows the user to program target pressures for pumping
  • Programmable 3-tiered display for maximum flexibility when displaying pressure, temperature, and electrical parameters of your choice
  • Display backlight
  • Damping, Min/Max, and % error function
  • Source mA with simultaneous pressure measurement to test valves and I/Ps
  • Simulate mA signals to troubleshoot 4-20 mA loops
  • Test pressure switches with built in switch test function
  • Power transmitters during test using 24 V loop supply with simultaneous mA measurement
  • Precision temperature measurement with the addition of an accessory RTD probe (available as an option)
  • Proven cleanout ports reduce pump failures
  • Moisture trap included with the unit helps mitigates risk of moisture damage

Applications

  • Pressure Instrument Calibration
  • Pressure Instrument Maintenance
  • Petro-Chemical
  • Oil and Gas
  • Pharmaceutical
  • Water and wastewater
  • Food and Beverage
  • Power Generation
-10%
Close

Fluke 724 Temperature Calibrator

Original price was: $5,248.00.Current price is: $4,723.00.
Excluding GST 10%

Features

  • Measure Accuracy
    • RTD: .2 to .33°C
    • Thermocouples: .7 to 1.8°C
    • Voltage DC: 0.025% to 0.02%
    • Current DC: 0.02%
    • Resistance: 0.1 to 1.5%
  • Source Accuracy
    • Voltage DC: 0.025 to 0.02%
    • Resistance: 0.15Ω to 1Ω
-10%
Close

Fluke 725 Multifunction Process Calibrator

Original price was: $5,905.00.Current price is: $5,315.00.
Excluding GST 10%

Features

  • Up to 30V and 24mA DC
  • 0 to 3200Ω resistance
  • Up to 10kHz frequency
    • 1V peak-to-peak-minimum senitivity
  • Combine with a 750P module for pressure
  • Store frequently used test setups for later use
-10%
Close

Fluke 726 Precision Multifunction Process Calibrator

Original price was: $7,931.00.Current price is: $7,138.00.
Excluding GST 10%

Features

  • Up to 20V (source), up to 30V (measure)
  • 0 to 24mA source and simulate
  • Up to 4000Ω resistance
  • Frequency up to 15kHz
  • RTD and thermocouple compatible
  • Combine with a 750P module for pressure
  • Memory storage for up to 8 calibration results
  • Perform fast linearity tests with auto step & auto ramp
  • 24VDC Loop Supply
  • 3-year warranty
Close

Fluke 753 Advanced Process Calibrators

$10,493.00
Excluding GST 10%

Features

  • Full-featured documenting process calibrator for calibrating and troubleshooting
  • Measures volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Sources and simulate volts, mA, pressure, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Powers transmitters during test using loop supply with simultaneous mA measurement
  • Measures and sources pressure
  • Allows you to creates and run automated as-found/as-left procedures to satisfy quality programs or regulations, and record and document results
  • Holds up to a full week of downloaded procedures and calibration results
  • Offers many flexible features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay
  • Offers compatibility with DPCTrack2 and many other asset management software packages
  • Bright white dual display for reading both sourced and measured parameters simultaneously
  • Easy-to-use multi-lingual interface
  • Gas gauge and rechargeable Li-Ion battery for 10 hour uninterrupted use
Close

Fluke 754 Documenting Process Calibrator

$12,443.00
Excluding GST 10%

Features

  • Full-featured documenting process calibrator with HART communication for calibrating and troubleshooting HART instrumentation
  • Measures volts, mA,TDs, thermocouples, frequency, and ohms to test sensors, transmitters and more
  • Sources/simulates volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Powers transmitters during test using loop supply with simultaneous mA measurement
  • Handles fast pulsed rtd transmitters and PLCs, with pulses as short as 1 ms
  • Creates and runs automated as-found/as-left procedures to satisfy quality programs or regulations, and records and documents results
  • Holds up to a full week of downloaded procedures and calibration results
  • Uses many features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more
  • Provides easy-to-use multi-lingual interface
  • Features a bright white dual display for reading both sourced and measured parameters simultaneously
  • Offers compatibility with many asset management software packages
  • Multifunctional
  • Powerful, yet easy to use
  • Records and documents results
  • Truly hand-held
  • Rugged and reliable
  • Bright white display
  • Soft keys
  • Three operating modes
  • Multi-lingual interface
  • Built-in algebraic calculator
  • Programmable measurement delay
-10%
Close

Fluke 771 Milliamp Process Clamp Meter

Original price was: $1,267.00.Current price is: $1,140.00.
Excluding GST 10%

Features

  • 0.2% or reading + 5 counts accuracy at -20.99 mA to 20.99 mA
  • 1% or reading + 5 counts accuracy at -21.0 mA to -99.9 mA and 21.0 mA to 99.9 mA
  • 0.177 in or 4.5mm max diameter of measurable conductor
  • -10° to 55°C operating temperature
  • IP40 rating
-10%
Close

Fluke 772 Milliamp Process Clamp Meter

Original price was: $1,776.00.Current price is: $1,598.00.
Excluding GST 10%

Features

  • mA Measurement Range / Accuracy
    • 0 to 20.99 mA / 0.2% + 5 counts (clamp)
    • 21.0 to 100.0 mA / 1% + 5 counts (clamp)
    • 0 to 24 mA / 0.2% + 2 counts (test jacks)
  • mA Source Range / Accuracy
    • 0 to 24.00 mA 0.2% / + 2 counts
  • mA Simulate Range / Accuracy
    • 0 to 24.00 mA 0.2% / + 2 counts
  • Simultaneously measure mA in-circuit with 24V loop power
  • auto-off, backlight timeout extend battery life
-10%
Close

Fluke 773 Milliamp Process Clamp Meter

Original price was: $2,539.00.Current price is: $2,285.00.
Excluding GST 10%

Key features

  • Loop calibrator that measures 4 to 20 mA signals without breaking the loop
  • Features best in class 0.2% accuracy
  • Sources 4 to 20 mA signals for testing control system I/O or I/Ps
  • Delivers 0.01 mA resolution and sensitivity
  • Measures DC voltage to verify 24V power supplies or voltage I/O signals