Showing 25–36 of 67 results

Show sidebar
-10%
For Fluke 43X power quality analyzers and 190-series ScopeMeters.
Close

Fluke BP290 Li-Ion Battery Pack

Original price was: $632.00.Current price is: $569.00.
Excluding GST 10%

For Fluke 43X power quality analyzers and 190-series ScopeMeters. What’s included with the Fluke BP290 Fluke BP290 Li-Ion Battery Pack

-10%
Double Capacity Li-Ion Battery Pack
Close

Fluke BP291 Double Capacity Li-Ion Battery Pack

Original price was: $645.00.Current price is: $581.00.
Excluding GST 10%

For Fluke 43X power quality analyzers and 190-series ScopeMeters. What’s included with the Fluke BP291 Fluke BP291 Double Capacity Li-Ion

-10%
Soft Carrying Case For 120B Series
Close

Fluke C120B Soft Carrying Case For 120B Series

Original price was: $219.00.Current price is: $197.00.
Excluding GST 10%

For use with the Industrial Scope Meter Series.

-10%
Fluke CS20MA Current Shunt
Close

Fluke CS20MA Current Shunt

Original price was: $197.00.Current price is: $177.00.
Excluding GST 10%

Features a 4 to 20mA current range for AC and DC measurements on process control loops and is intended for

-10%
Fluke EBC290 External Battery Charger
Close

Fluke EBC290 External Battery Charger

Original price was: $219.00.Current price is: $197.00.
Excluding GST 10%

External battery charger for Li-ion batteries for 190B and 120B Series ScopeMeters and power quality analyzers. What’s included with the

-10%
Placeholder
Close

Fluke eMobility Tools Kit with FEV100 Test Adapter, 125B ScopeMeter®, 87V Multimeter and Test Leads

Original price was: $5,442.00.Current price is: $4,898.00.
Excluding GST 10%

 features

  • Test charging states of EVSE with CP state simulation with the 12B ScopeMeter®.
  • Verify charging voltage and maximum available current using the 87V multimeter and TL224 test leads.
  • Check protective earth for correct wiring and functioning with the PE pre-test feature.
  • Perform GFCI troubleshooting of EVSE and verify operation within safety standards.
-9%
Close

Fluke HC120-II Hook Clips, set of 2

Original price was: $117.00.Current price is: $106.00.
Excluding GST 10%

Fluke HC120-II Specifications

  • Maximum Voltage – 600 V rms CAT III per IEC 1010-2-031
  • Maximum Wire Size – 2.5 mm
  • Contact Material – Nickel plated steel
-10%
Close

Fluke HH290 Hanging Hook

Original price was: $146.00.Current price is: $131.00.
Excluding GST 10%

Hanging Hook for ScopeMeter 190-Series II.

Close

Fluke MDA-510 Motor Drive Analyzer, 4 Channel, 500 MHz

$10,325.00
Excluding GST 10%

Features

  • Key measurements: inverter output voltage, DC bus voltage and ripple voltage, and unbalance
  • Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
  • Measure key motor-drive parameters including voltage, current, DC Bus voltage level and AC ripple, voltage and current unbalance, and voltage modulation
  • Conduct guided measurements for motor-drive input, DC bus, and drive output with graphical step-by-step voltage and current connection diagrams
  • Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
  • Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
  • Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
  • Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream

Applications

  • Industrial automation
  • HVAC/R
  • Motor repair
  • Discrete or process based industrial manufacturing
  • Waste water treatment
  • Oil and gas maintenance

What’s included with the Fluke M

-10%
Motor Drive Analyzer
Close

Fluke MDA-550 Motor Drive Analyzer with Motor Shaft and Harmonics, 4 Channel, 500 MHz

Original price was: $10,659.00.Current price is: $9,593.00.
Excluding GST 10%

Features

  • Key measurements: inverter output voltage, DC bus voltage and ripple voltage, harmonics, unbalance
  • Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
  • Measure key motor-drive parameters including voltage, cur- rent, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics, voltage modulation, and motor shaft voltage discharges
  • Perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system
  • Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements with graphical step-by-step voltage and current connection diagrams
  • Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
  • Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
  • Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
  • Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
Placeholder
Close

Fluke MDA-550-III Motor Drive Analyzer, 4 channel, 500 MHz

$12,947.00
Excluding GST 10%

Features

  • Key measurements: inverter output voltage, DC bus voltage and ripple voltage, harmonics, unbalance
  • Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
  • Measure key motor-drive parameters including voltage, cur- rent, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics, voltage modulation, and motor shaft voltage discharges
  • Perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system
  • Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements with graphical step-by-step voltage and current connection diagrams
  • Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
  • Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
  • Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
  • Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
-10%
Close

Fluke OC4USB USB Interface Cable

Original price was: $482.00.Current price is: $434.00.
Excluding GST 10%

A USB interface cable designed to connect the optically-isolated serial interface port of ScopeMeter or Power Quality Analyzer to a