Excluding GST 10%
Excluding GST 10%
Fluke Amprobe AT-6030 Advanced Wire Tracer Kit
$2,206.00 Original price was: $2,206.00.$1,985.00Current price is: $1,985.00.Excluding GST 10%
Key features
- Work directly on an energized circuit without the need to take equipment offline
- Save time searching for energized and de-energized wires hidden behind walls, ceilings and floors
- Pinpoint wire location with the large color LCD Receiver screen featuring four unique modes
- Identify breakers and fuses, as well as the location of a break, open or short
- Non-Contact Voltage Detection utilizes passive tracing without the Transmitter to verify if a wire is energized
- Includes the CT-400 Signal Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
Available on backorder
Related products
Fluke 720A Kelvin-Varley Divider
- 0.1 ppm resolution, seven decades
- 0.1 ppm of input absolute linearity
- Built-in self calibration bridge
- Front panel self-calibration
Fluke VisiFault Visual Fault Locator
Excluding GST 10%
- Locates visual faults including tight bends, breaks and bad connectors
- Accelerates end-to-end fiber checks
- Easily verifies polarity and identifies fibers
- Features continuous and flashing modes
- Ergonomic case survives drops, impacts and vibrations
Fluke TP912 Replacement Probe Tips for Model TL910
Excluding GST 10%
Fluke TP912 Offers
- Five sets of gold plated and stainless steel tips
- One year warranty
Fluke Amprobe ACD-14-PRO Dual Display 600 A TRMS Clamp Multimeter
Excluding GST 10%
Product Features:
- Large LCD with dual display can show voltage and amps simultaneously
- True-RMS for accurate voltage measurements in noisy environments
- Low pass filter for current and voltage measurements on variable frequency drives
- Amp-Tip function for precise low current measurement down to 0.1 amp
- Ideal for HVAC applications with temperature, DC micro-amps and capacitance measurements
- Performs non-contact voltage detection (NCV)
- In-rush current measurement
- Audible continuity and diode test
- Data hold function
- Auto ranging instantly selects correct range
- Auto power off and low battery indicator
- Safety rated to CAT III 600 V
Fluke T5-H5-1AC-KIT/US Electrical Tester Kit with Holster and 1AC II Voltage Tester
Excluding GST 10%
Features
- Reliable electrical tester automatically measures volts AC and volts DC with precise digital resolution
- Automatically measure AC and DC voltage up to 1000 V with precise digital resolution
- Measure current up to 100 A without breaking the circuit with OpenJaw™ design
- Troubleshoot resistance problems up to 1000 Ω
- Work in tight spaces with detachable Slim Reach probe tips
- Withstands a 10′ (3 m) drop
- Offers Auto-off mode to conserve battery life
- Fits into an optional holster that attaches to a belt and neatly stows test leads
- Protected to EN61010-1 CAT IV 600 V / CAT III 1000 V rating
- Integrated protection circuit allows it to stay connected to a voltage source longer than a solenoid tester
- UL and CSA approved
Automatically measure AC and DC voltage up to 1000 V with precise digital resolution
- Auto-selects between AC and DC voltage
- Suitable for industrial applications
Measure current up to 100 A without breaking the circuit with OpenJaw™ design
- OpenJaw™ design allows for fast and easy current measurement
- Measure current more safely without metallic contact
Troubleshoot resistance problems up to 1000 Ω
- Measure resistance when troubleshooting motors, HVAC/R systems or electrical systems
- Built in continuity beeper provides fast and easy go/no-go tests
Work in tight spaces with detachable Slim Reach probe tips
- Features a compact design with handy probe storage, easily fits in one hand
- The test lead slot in the back makes the meter an “extended handle” for the probe, leaving the other hand free to place the second lead
- Test leads accept Fluke accessory test clips
Fluke 1AC-A1-II AC Voltage Detector
Easy to carry in your shirt pocket and with continuous self-test so you always know that it’s working, this non-contact voltage detector allows you to quickly test for energized circuits in the workplace or at home.
Features
- Voltage detection of 90 to 1000V AC or 200 to 1000V AC
- Rugged and reliable
Fluke Amprobe USB-KIT2 Download Module for Amprobe Clamps
Excluding GST 10%
Product Features:
- Software for Transferring Data to PC
- Includes Connection Cable
- For Amprobe Clamp Meters
Fluke 732C and 734C DC Voltage Reference Standards
The simple way to maintain and disseminate the volt
The Fluke Calibration 732C DC Voltage Reference Standard is a RoHS compliant direct voltage reference used to maintain the volt in primary and secondary standards laboratories. Individual 732C voltage standards provide 10 V, 1 V, and 0.1 V outputs and may be transported easily to remote locations while the dc reference is maintained in the laboratory. The 734C DC Voltage Reference Standard consists of four electrically and mechanically independent 732C DC Reference Standards and a rack-width enclosure. Two model families, Base and Select, differ in that the Select models are two times more stable than the Base models.
Because each 732C in the 734C DC Reference Standard is based on the same architecture pioneered in the popular 732A DC Voltage Standard—the first standards lab quality 10 V electronic reference—you can rely on it to provide the same high stability and predictable drift rate you’ve come to expect, in a smaller, more portable package identical to the 732B DC Voltage Standard. The 734C is also compatible with 732B DC standards and can support any combination of 732 B and C models. Similarly, 734A can be used with the newer 732C voltage standards, providing the ultimate flexibility and maximizing asset utilization.
To simplify support of your 734C, Fluke Calibration offers a variety of calibration services to assign values and predicted performance for each of the 10 V outputs, traceable to national standards and to the Fluke Calibration 10 V Josephson Array.
Fluke PRV240 Proving Unit, 240V
Excluding GST 10%
Fluke PRV240 Offers
Reduces the risk of shock and arc flash by removing unnecessary exposure to a potentially hazardous electrical environment while verifying the functionality of test tools before and after absence or presence of voltage is checked.
Features
- Sources both AC and DC steady-state voltage – supplies 240 V DC/AC
- A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
- Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
- Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
- Long battery life – 5,000 tests per set of four AA batteries
Test Before Touch
Provides a safe method to verify that your electrical test tool is operating properly before you conduct further tests. The concept of “Test Before Touch” (TBT) or three point test method involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.
Designed for safety and compliance
Safe and easy method for verifying proper operation of your test tool before attempting to test for either an energized source or a de-energized source without the need for cumbersome PPE, or in cases where no known voltage source is available. Your environment may still require minimal PPE such as hard, safety glasses or earplugs when using a proving unit.