The Kyoritsu 1021R is a True RMS multimeter for measurement on all types of signals. The instrument has an ergonomic design and automatic range selection, min / max / relative measurement, illuminated display, and data slots. The Kyoritsu 1021R measures True RMS voltage, current, frequency, resistance, capacitance, duty cycle, diodes test.
Previous product
Back to products
Kyoritsu 3125A 5kV Digital Insulation tester
$2,125.00
Excluding GST 10%
Next product
Kyoritsu 2200 AC Digital Clamp Meter
$180.00
Excluding GST 10%
Kyoritsu 1021R Digital Multimeter
$191.00Excluding GST 10%
Features:
- Elegant and easy-to-use cabinet
- Large display with 6000 counts and Backlight
- Enhanced current measuring function using an external clamp sensor
- Two detachable holders, flat and wing type
- Accurate reading with True RMS
- Safety Standard IEC 61010-1 CAT IV 300V / CAT III 600V
Related products
Close
Kyoritsu 6010B Multifunction Electrical Tester
Features
- Continuity 20/200 Ω 200 mA Test Current
- Insulation 500/1000 V, 20/200 MΩ 1 mA Rated Test Current
- Loop Impedance 20/2000 Ω 15mA Test Current at 2000 Ω (No RCD Trip)
- RCD 10/30/100/300/500mA x1/2, x1, Fast Trip (40 ms), DC, Auto Ramp
- Uc (Contact Voltage) 100 V
- Designed to IEC 61010-1, IEC 61557
- Data Memory: 300 measured results
- Download Results to PC by Using 8212 Data Communication Adapter through Optical RS-232C Port
Close
Kyoritsu 1062 MEAN/RMS Switch Multimeter, 1000V
Features
- 0.02% basic DC accuracy
- Large display with 50,000 counts
- Dual display for double indication for AC and DC, V and Hz, etc
- True RMS Measurements AC and AC+DC
- Wide AC Frequency bandwidth from 10Hz to 100kHz
- True RMS or MEAN value detection mode can be selected
- Fast Peak Hold response time of 250µs
- Low-pass filter for motor drive measurements
Close
Kyoritsu 3128 12kV 10kV High Voltage Insulation Tester
Features
- Microprocessor controlled high voltage insulation resistance tester with Diagnostic functions
- Suitable for analyzing the insulation characteristics of cables, transformers, motors, generators, high-pressure switches, insulators, wiring installations, etc
- 6 ranges: 500 V, 1000 V, 2500 V, 5000 V, 10000 V, 12000 V, 12kV
- Fine adjustment of voltage setting at each range is also possible
- Graphic representation of the insulation resistance and leakage current versus time on large display with bar graph and backlight
- Can be operated from built-in rechargeable battery or from AC line
- Automatic discharge after test with monitoring of the discharge voltage
- Internal memory can store about 43,000 data (max)
- Robust design for field use with IP64 rating (with lid closed)
Close
Kyoritsu 2200 AC Digital Clamp Meter
Features
- Ultra Slim and lightweight Handy design
- 1000 A AC Clamp Meter AC40/400/1000 A Auto Range
- Ø33 mm Tear Drop Jaw easy to use in tight places
- DMM function ACV, DCV, Ω, Continuity Buzzer
- Fuseless electronic protection on up Ω / to 600 V
- IEC61010-1 Safety Standard
- CAT III 600V (AC A) CAT III 300V / CAT II 600V (AC/DC V)
Close
Kyoritsu 4118A LOOP/PFC/PSC Tester, 20/200/2000 Ω, 195 to 253 V/50 Hz
Features
- Custom microprocessor controlled for highest accuracy and reliability
- 3 LED’s for checking correct wiring status
- Direct reading of Prospective Short Circuit Current (PSC)
- Safe voltage measurement function
Close
Kyoritsu 2003A Clamp Meter, 2000A/1000V
Features
- Tear-drop-shaped jaws for ease of use in crowded cable areas and other tight places
- Provides a wide measuring range from 0 up to 2000A AC/DC
- Terminal cover to avoid the use of an incorrect terminal
- MAX Measurement function for easy reading of maximum input over a certain period of time
- Output terminal for long term current monitoring
- Safety design throughout
Close
Kyoritsu 8035 Non-Contact Safety Phase Indicator, 70 to 1000 V AC
Features
- Innovative technology permits safe, contact-free testing
- The insulated crocodile clips can clip insulated cables from Ø0.09 to 1.18″ (2.4 to 30 mm)
- Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones
- Can be fixed to a metal panel via the magnet on the back side
- Wide measuring range for three-phase installations from 70 to 1000 V AC
- Complies with IEC 61010-1 CAT 600 V and CAT 1000 V
Close
Kyoritsu 6315-04 Power Quality Analyzer
Features
- Helpful support functions: Quick start guide, wiring check and sensor detection for easy and reliable measurement
- Measurement with high accuracy: Guaranteed accuracy: ±0.3%rdg (energy), ±0.2%rdg (voltage/ current); Complies with the international standard IEC 61000-4-30 class S and the european standard EN50160
- Remote monitoring on PC and Android device: Remote checking of measurement in real-time is possible via Bluetooth communication; Recorded data can be saved in the supplied SD card; EN50160 report can be generated after survey by PC software
- Various clamp current sensors: Various types of clamp and flexible sensors are available from 1000 mA range up to 3000 A range and earth leakage measurements; Energy consumption check on site, trend and demand graphs for easy recognition, TFT color display with high resolution
- IEC 61010-1 CAT IV 300 V, CAT III 600 V, CAT II 1000 V
