Safe and contactless, this phase indicator checks for phase rotation and the presence of an open phase. Ideal for three-phase installations, this indicator features a wide measuring range from 70 to 1000 V AC and insulated cables can be clipped from Ø0.09 to 1.18″ (2.4 to 30 mm) with the help of insulated crocodile clips.
Previous product
Back to products
Kyoritsu 6315-04 Power Quality Analyzer
$5,500.00
Excluding GST 10%
Next product
Kyoritsu KEW2117R AC Digital Clamp Meter, True RMS, 1kHz
$161.00
Excluding GST 10%
Kyoritsu 8035 Non-Contact Safety Phase Indicator, 70 to 1000 V AC
$499.00Excluding GST 10%
Features
- Innovative technology permits safe, contact-free testing
- The insulated crocodile clips can clip insulated cables from Ø0.09 to 1.18″ (2.4 to 30 mm)
- Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones
- Can be fixed to a metal panel via the magnet on the back side
- Wide measuring range for three-phase installations from 70 to 1000 V AC
- Complies with IEC 61010-1 CAT 600 V and CAT 1000 V
Related products
Close
Kyoritsu KEW6516BT Multi-Function Tester with Bluetooth
Features
- Color LCD 3.5″ dot matrix
- Anti-trip technology (with 2 and 3 wire) for no trip LOOP L-PE testing on all RCDs
- With 2 wires only, very useful in case of no neutral (i.e. three-phase motor lines)
- High test current range of 2 Ω with 0.001 Ω resolution
- Zs Limit compares the values required by electrical installations standard with measured results
- Type AC, A, F, B (General and Selective), EV and Variable RCDs
- Single and auto test, ramp test and contact voltage
- Earth resistance test 2 and 3 wires with all accessories included
Close
Kyoritsu 2056R True RMS AC/DC Digital Clamp Meter, 1000A/600V
Features
- 600V input protection
- Sleep function saves battery life
- NCV function detects the presence of voltage in an electrical circuit or equipment without touching them
- Temperature measurement with optional k-type temperature probe
- Continuity & diode check
- Capacity measurement
- Peak hold function for peak value measurements on inrush currents (only at AC A range)
- Data hold
- Comfortable double moulded main body
- LCD backlight
- 6039 count and bar graph display
- REL function to indicate measurement variation (current, voltage, resistance)
- Min/Max function
Close
Kyoritsu 6315-04 Power Quality Analyzer
Features
- Helpful support functions: Quick start guide, wiring check and sensor detection for easy and reliable measurement
- Measurement with high accuracy: Guaranteed accuracy: ±0.3%rdg (energy), ±0.2%rdg (voltage/ current); Complies with the international standard IEC 61000-4-30 class S and the european standard EN50160
- Remote monitoring on PC and Android device: Remote checking of measurement in real-time is possible via Bluetooth communication; Recorded data can be saved in the supplied SD card; EN50160 report can be generated after survey by PC software
- Various clamp current sensors: Various types of clamp and flexible sensors are available from 1000 mA range up to 3000 A range and earth leakage measurements; Energy consumption check on site, trend and demand graphs for easy recognition, TFT color display with high resolution
- IEC 61010-1 CAT IV 300 V, CAT III 600 V, CAT II 1000 V
Close
Kyoritsu KEW2117R AC Digital Clamp Meter, True RMS, 1kHz
Features
- Frequency response: 40Hz to 1kHz
- Full Safety Jaw
- Ergonomic over-molded body gives convenient one-handed operation
- Large easy-to-read display with 0.1 A resolution
- Accurate reading with True RMS 600/1000A auto-ranging
- Long battery life
- Safety Standard: IEC61010-1 CAT IV 300V / CAT III 600V
Close
Kyoritsu 2046R True RMS AC/DC Digital Clamp Meter, 600A/600V
Features
- 600V input protection
- Sleep function saves battery life
- NCV function detects the presence of voltage in an electrical circuit or equipment without touching them
- Temperature measurement with optional k-type temperature probe
- Continuity & diode check
- Capacity measurement
- Peak hold function for peak value measurements on inrush currents (only at AC A range)
Close
Kyoritsu 3128 12kV 10kV High Voltage Insulation Tester
Features
- Microprocessor controlled high voltage insulation resistance tester with Diagnostic functions
- Suitable for analyzing the insulation characteristics of cables, transformers, motors, generators, high-pressure switches, insulators, wiring installations, etc
- 6 ranges: 500 V, 1000 V, 2500 V, 5000 V, 10000 V, 12000 V, 12kV
- Fine adjustment of voltage setting at each range is also possible
- Graphic representation of the insulation resistance and leakage current versus time on large display with bar graph and backlight
- Can be operated from built-in rechargeable battery or from AC line
- Automatic discharge after test with monitoring of the discharge voltage
- Internal memory can store about 43,000 data (max)
- Robust design for field use with IP64 rating (with lid closed)
Close
Kyoritsu 5711 Voltage Detector, 50/60Hz
Features:
- Senses AC voltage through insulation
- Buzzer sounds and tip glows upon ac voltage detection
- Powerful flashlight
- Dual range (Hi/ Lo) sensitivity
- Ready to use without power-on
Designed to meet IEC61010-1
Close
Kyoritsu 3125A 5kV Digital Insulation tester
Features
- Insulation Resistance up to 1TΩ
- Short-Circuit Current up to 1.5mA
- Wide Test Voltage from 250V to 5000V
- Diagnosis Function of PI and DAR
- Newly-designed alligator clip
- It comes with a tough hard case
- Filter function reduces noise interference for obtaining stable measurement
- Large display with Bar Graph indication and backlight
- Live voltage warning
- Safety standard IEC 61010-1 CAT IV 300V/CAT III 600V
