Safe and contactless, this phase indicator checks for phase rotation and the presence of an open phase. Ideal for three-phase installations, this indicator features a wide measuring range from 70 to 1000 V AC and insulated cables can be clipped from Ø0.09 to 1.18″ (2.4 to 30 mm) with the help of insulated crocodile clips.
Previous product
Back to products
Kyoritsu 6315-04 Power Quality Analyzer
$5,500.00
Excluding GST 10%
Next product
Kyoritsu KEW2117R AC Digital Clamp Meter, True RMS, 1kHz
$161.00
Excluding GST 10%
Kyoritsu 8035 Non-Contact Safety Phase Indicator, 70 to 1000 V AC
$499.00Excluding GST 10%
Features
- Innovative technology permits safe, contact-free testing
- The insulated crocodile clips can clip insulated cables from Ø0.09 to 1.18″ (2.4 to 30 mm)
- Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones
- Can be fixed to a metal panel via the magnet on the back side
- Wide measuring range for three-phase installations from 70 to 1000 V AC
- Complies with IEC 61010-1 CAT 600 V and CAT 1000 V
Related products
Close
Kyoritsu 2200 AC Digital Clamp Meter
Features
- Ultra Slim and lightweight Handy design
- 1000 A AC Clamp Meter AC40/400/1000 A Auto Range
- Ø33 mm Tear Drop Jaw easy to use in tight places
- DMM function ACV, DCV, Ω, Continuity Buzzer
- Fuseless electronic protection on up Ω / to 600 V
- IEC61010-1 Safety Standard
- CAT III 600V (AC A) CAT III 300V / CAT II 600V (AC/DC V)
Close
Kyoritsu KEW2117R AC Digital Clamp Meter, True RMS, 1kHz
Features
- Frequency response: 40Hz to 1kHz
- Full Safety Jaw
- Ergonomic over-molded body gives convenient one-handed operation
- Large easy-to-read display with 0.1 A resolution
- Accurate reading with True RMS 600/1000A auto-ranging
- Long battery life
- Safety Standard: IEC61010-1 CAT IV 300V / CAT III 600V
Close
Kyoritsu 1021R Digital Multimeter
Features:
- Elegant and easy-to-use cabinet
- Large display with 6000 counts and Backlight
- Enhanced current measuring function using an external clamp sensor
- Two detachable holders, flat and wing type
- Accurate reading with True RMS
- Safety Standard IEC 61010-1 CAT IV 300V / CAT III 600V
Close
Kyoritsu 4105A-H Ground Resistance Tester, Digital, 2000Ω
Features
- Ground resistance values can be read directly from the scale
- Capable of measuring ground voltage
- Lead wire connection to C and P terminals and proper auxiliary earth resistance can be checked
- Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance
- Designed to meet IEC61010-1 Cat. III 300V
- New shock resistant case material is also dust and drip proof
Close
Kyoritsu KEW6516BT Multi-Function Tester with Bluetooth
Features
- Color LCD 3.5″ dot matrix
- Anti-trip technology (with 2 and 3 wire) for no trip LOOP L-PE testing on all RCDs
- With 2 wires only, very useful in case of no neutral (i.e. three-phase motor lines)
- High test current range of 2 Ω with 0.001 Ω resolution
- Zs Limit compares the values required by electrical installations standard with measured results
- Type AC, A, F, B (General and Selective), EV and Variable RCDs
- Single and auto test, ramp test and contact voltage
- Earth resistance test 2 and 3 wires with all accessories included
Close
Kyoritsu 1062 MEAN/RMS Switch Multimeter, 1000V
Features
- 0.02% basic DC accuracy
- Large display with 50,000 counts
- Dual display for double indication for AC and DC, V and Hz, etc
- True RMS Measurements AC and AC+DC
- Wide AC Frequency bandwidth from 10Hz to 100kHz
- True RMS or MEAN value detection mode can be selected
- Fast Peak Hold response time of 250µs
- Low-pass filter for motor drive measurements
Close
Kyoritsu 3128 12kV 10kV High Voltage Insulation Tester
Features
- Microprocessor controlled high voltage insulation resistance tester with Diagnostic functions
- Suitable for analyzing the insulation characteristics of cables, transformers, motors, generators, high-pressure switches, insulators, wiring installations, etc
- 6 ranges: 500 V, 1000 V, 2500 V, 5000 V, 10000 V, 12000 V, 12kV
- Fine adjustment of voltage setting at each range is also possible
- Graphic representation of the insulation resistance and leakage current versus time on large display with bar graph and backlight
- Can be operated from built-in rechargeable battery or from AC line
- Automatic discharge after test with monitoring of the discharge voltage
- Internal memory can store about 43,000 data (max)
- Robust design for field use with IP64 rating (with lid closed)
Close
Kyoritsu 2056R True RMS AC/DC Digital Clamp Meter, 1000A/600V
Features
- 600V input protection
- Sleep function saves battery life
- NCV function detects the presence of voltage in an electrical circuit or equipment without touching them
- Temperature measurement with optional k-type temperature probe
- Continuity & diode check
- Capacity measurement
- Peak hold function for peak value measurements on inrush currents (only at AC A range)
- Data hold
- Comfortable double moulded main body
- LCD backlight
- 6039 count and bar graph display
- REL function to indicate measurement variation (current, voltage, resistance)
- Min/Max function
