Search Results for: fluke
Fluke PQ400 Power Quality Window with cables, cable ties & markers
Features
- Permanently connected voltage and current sensors located inside the electrical panel allow you to make power quality and energy measurements using the external access points without opening the panel door, reducing operator risk
- Voltage and current connections for three-phase voltages, neutral and ground cover most measurement scenarios
- Automatic probe detection for 1740 and 1730 series power quality and energy loggers and compatible clamps, eliminates the need to open cabinet to check the clamp model
- Full 360° rotation allows the window to be oriented in any direction
- Simple installation using a step drill bit and electro-hydraulic hole punch (114.3 mm, 4.5″ diameter)
- CAT IV, 600 V and CATIII 1000 V rating according to IEC61010-2-30
- Compatibility with standard 4 mm shrouded safety-socket voltage test leads makes it easier to make voltage connections, and increases safety by reducing the risk of accidentally touching live electrical components
Fluke MDA-550 Motor Drive Analyzer with Motor Shaft and Harmonics, 4 Channel, 500 MHz
Features
- Key measurements: inverter output voltage, DC bus voltage and ripple voltage, harmonics, unbalance
- Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
- Measure key motor-drive parameters including voltage, cur- rent, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics, voltage modulation, and motor shaft voltage discharges
- Perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system
- Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements with graphical step-by-step voltage and current connection diagrams
- Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
- Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
- Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
- Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
-10%
Close
Fluke CO-205 Aspirator Kit
Fluke CO-205 Offers Sample flue gas with your Fluke CO-210 or CO-220 using the CO-205 Aspirator Kit Draw flue gas
Fluke 417D+62MAX+ KIT Laser Distance Meter/Infrared Thermometer Combo Kit
Ideal for indoor and outdoor applications, this laser distance measurer features a simple design and easy one-button operation which minimizes
-10%
Close
Fluke 88-5/A KIT Deluxe Automotive Multimeter Combo Kit
Features
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
- Large digit display with bright, two-level backlight
- 6000 counts, 3¾ digits
- Measure up to 1000 V AC and DC
- Measure up to 10, 20 A for up to 30 seconds
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity
- RPM measurements with inductive pickup
- Millisecond pulse width measurements for fuel injectors
- 10,000 µF capacitance range for components and motor caps
- Min/max-average recording with min/max alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without opening up the case
- “Classic” design with new removable holster with built in test lead and probe storage
- 10 mΩ input impedance wont load circuits
- 0.1% DC accuracy
Measures
- Resistance, continuity and diode test
- Millisecond pulse width measurements for fuel injectors
- Frequency to 200 kHz and % duty cycle
- Measure up to 1000 V AC and DC
- Measure current up to 10, 20 A for up to 30 seconds
- 4½ digits for precise measurements
- RPM measurements with optional inductive pickup
- Temperature measurements with optional temperature probe
Applications
- Automotive
Fluke C120B Soft Carrying Case For 120B Series
For use with the Industrial Scope Meter Series.
-10%
Close
Fluke TIS-MSD Mini SD Card
For use with the TI Series Thermal Imaging Cameras.
Fluke TiS20+ Thermal Imager, 120 x 90, 9 Hz
Features
- Continuous touchscreen IR-Fusion™, slide your finger across the screen to adjust the setting
- 120 x 90 infrared resolution (10,800 pixels)
- 3.5″ LCD touchscreen display for easy troubleshooting
- Automatically sort images with Fluke Connect Asset Tagging
- Can withstand drop up to 2 meter
- Water and dust resistant – IP54 enclosure rating
- IR-Fusion™ – combines visible and infrared images for faster inspections and better reporting. With a single touch, you can scan from full infrared to full visible images to pinpoint the location of an issue
Applications
- Electrical inspections
- HVAC/R inspections
- Mechanical
- Residential home inspections
- Light commercial maintenance
- Building diagnostics – building envelope and commercial/industrial facilities
Fluke TiS60+ Thermal Camera, 9 Hz, 320 x 240
Features:
- 320 x 240 resolution
- 2 meter drop test
- IR Fusion™ technology for context
- Fixed focus
- Measure up to 400 °C
Specifications:
- IFOV (spatial resolution): 1.86 mRad, D:S 532:1
- Infrared resolution: 320 x 240 (76,800 pixels)
- Field of view: 34.1 °H x 25.6 °H
- Focus system: Fixed
- Minimum focus distance: 46 cm (18 in)
- Ruggedized display: 3.5 inch (8.9 cm landscape) 320 x 240 LCD
- Ergonomic design: Designed for one-handed use
- Temperature range (not calibrated below -10 °C): -20 °C to 400 °C (-4 °F to 752 °F)
- Accuracy: ± 2 °C or 2 % (at 25 °C nominal, whichever is greater)
- Thermal sensitivity (NETD): ≤ 0.045 °C at 30 °C target temp (45 mK)
- On-screen emissivity correction: Yes (both value and table)
- On-screen reflected background temperature compensation: Yes
- On-screen transmission correction: No
- IR Fusion technology: Yes
- AutoBlend mode: Yes
- Picture-In-Picture (PIP): Yes
- Built-in digital camera (visible light): 5MP
- Level and span: Smooth auto and manual scaling
- Fast auto-rescale in manual mode: Yes
- Minimum span (in manual mode): 2.5 °C (4.5 °F)
- Minimum span (in auto mode): 5 °C (9.0 °F)
- Extensive memory options: Internal 4GB memory and 4GB micro SD card
- Image capture, review, save mechanism: One-handed image capture, review, and save capability
- Image file formats: Non-radiometric BMP or JPEG or fully-radiometric is2
- Memory review: Yes
- Laser pointer: Yes
- Frame rate: < 9 Hz or 30 Hz
- Color alarms: High temperature, low temperature, isotherms (within range)
- Infrared spectral band: 7.5 μm to 14 μm
- Operating temperature: -10 °C to +50 °C (14 °F to 122 °F)
- Storage temperature: -20 °C to +50 °C (-4 °F to 122 °F) without batteries
- Relative humidity: 10 % to 95 %, non-condensing
- Center-point temperature measurement: yes
- Spot temperature: Hot and cold spot markers
- User-definable spot markers: 3
- User defined measurement boxes: Expandable-contractible measurement box
- Safety standards: IEC 61010-1: Overvoltage category II, Pollution Degree 2
- Electromagnetic combability: IEC 61326-1: Basic EM environment. CISPR 11: Group 1, Class A
- Australian RCM: RCM IEC 61326-1
- Vibration: 2G, IEC 68-2-6
- Shock: 25G, IEC 68-2-29
- Dimensions (L x W x H): 267mm x 101mm x 145mm
- Weight: 0.72kg
Fluke TiS60+ Thermal Camera, 30 Hz, 320 x 240
Features
- 320 x 240 resolution for the clarity and image detail you need
- 3.5 inch LCD screen so you can recognize issues in the field
- Easy to use fixed focus, just point and shoot
- Measure up to 400 °C to handle all your applications
- One-handed image capture, review and save capability
- Usability tools to make your measurements quickly with confidence
- Fixed focus simplicity means you get useful images the first time
- IR-fusion gives you flexibility to view images with the context of the scene
- Create accurate work orders with annotation tools (voice and photo notes)
- Compile your images and meter measurements in one file with Fluke Connect
Applications
- Electrical inspections
- HVAC/R inspections
- Mechanical
- Residential home inspections
- Light commercial maintenance
- Building diagnostics – building envelope and commercial/industrial facilities
Close
Fluke Ti480 PRO 9Hz Infrared Camera, 640 x 480
Key features
- Increased sensitivity to visualize temperature differences
- Easier to visualize and diagnose issues with sharper onscreen images, multiple rectangle markers and 9 color palettes
- More intuitive visual interface, improved, user-tested, touch screen interface
- More flexibility to visualize target, tiny-to-large with interchangeable smart lenses – no calibration required, 2x and 4x telephoto, wide angle and macro lens compatibility
- Capture a clear, accurate image focused throughout the field of view with MultiSharp™ Focus
- Get an instant in-focus image of your designated target. LaserSharp® Auto Focus uses a built-in laser distance meter that calculates and displays the distance from your designated target.
- Get 4x the pixel data with SuperResolution, which captures multiple images and combines them to create a 1280 x 960 image
- Save time – wirelessly sync images directly from your camera to the Fluke Connect® system, and attach to an asset record or work order
- Reduce the need take notes in the field with IR-PhotoNotes™ and voice annotations
- Subject to Export Control
Product overview: Fluke Ti480 PRO Infrared Camera
It’s a dilemma. Preventive and predictive maintenance rounds must be done, however when conditions are harsh, there is no margin for error. Accurate measurements need to be captured the first time. Don’t go out unprepared. The Fluke Ti480 PRO is designed to work in the toughest industries.
- Oil and gas production
- Electrical, water and gas utilities
- Metallurgy
- Glass manufacturing
The rugged, pistol grip design of this camera allows the thermographer to focus on their surroundings rather than the camera. Clip it to your pack and climb a ladder – the camera can take it. Even after that type of a climb you can capture a surprising level of detail with the high thermal sensitivity, allowing you to isolate the smallest temperature anomalies. Display these temperature differences in SuperResolution mode – get 4x the standard resolution and analyze your thermal images in more detail than ever before. Never miss a temperature anomaly again, capture in-focus images throughout the field of view with MultiSharp. While you may not need all these features on a daily basis, they are essential when diagnosing mission critical equipment. When you need to get the right image the first time, reach for the Fluke Ti480 PRO.
Get the most out of your Ti480 PRO with Fluke Connect™ desktop software. Create professional reports in minutes while efficiently capturing full radiometric data to support your maintenance program.
- Edit and optimize images
- Combine infrared and visible images for simpler analysis
- Create detailed reports
- Organize and search images by asset, severity, and title
Close
Fluke Ti480 PRO 60Hz Infrared Camera, 640 x 480
Features
- Increased sensitivity to visualize temperature differences
- Easier to visualize and diagnose issues with sharper onscreen images, multiple rectangle markers and nine color palettes
- More intuitive visual interface, improved, user-tested, touch screen interface
- More flexibility to visualize target, tiny-to-large with interchangeable smart lenses – no calibration required, 2x and 4x telephoto, wide angle and macro lens compatibility
- Capture a clear, accurate image focused throughout the field of view with MultiSharp™ Focus
- Get an instant in-focus image of your designated target. LaserSharp® Auto Focus uses a built-in laser distance meter that calculates and displays the distance from your designated target
- Get 4x the pixel data with SuperResolution, which captures multiple images and combines them to create a 1280 x 960 image
- Save time – wirelessly sync images directly from your camera to the Fluke Connect® system, and attach to an asset record or work order
- Reduce the need take notes in the field with IR-PhotoNotes™ and voice annotations
- Subject to Export Control
Applications
- Industrial maintenance
- Heavy commercial facility maintenance
- Oil and gas maintenance
- Veterinary
- Reliability inspections (PdM)
- Heavy building diagnostics – building envelope and construction defects
- Electrical, water, gas utilities
- Chemical processing
- Machinery, instrumentation and appliances
