Fluke 721EX-3650 Dual Sensor Pressure Calibrator, 36 PSIG/5000 PSIG
Features
- Can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
- Two isolated, stainless steel, pressure sensors with 0.025% accuracy
- Switch test on both pressure inputs
- Pressure displayed in the user’s choice of 19 engineering units: psi, bar, mbar, kPa, kgcm2, cmH2O @ 4°C, cmH2O @ 20°C, mH2O @ 4°C, mH2O @ 20°C, inH2O @ 4°C, inH2O @ 20°C, inH2O @ 60°F, mmHg @ 0°C, inHg @ 0°C, ftH2O @ 4°C, ftH2O @ 20°C, ftH2O @ 60°F
- Precision temperature measurement with optional RTD probe
- Measures 4 to 20 mA signals
- Large backlit graphic display shows up to three inputs simultaneously
- Store five instrument setups for recall and use
Close
Fluke 7250, 7250i, and 7250xi Pressure Controller / Calibrators
- Pressure ranges from 0 to 5 and 0 to 3 000 psi (0 to 35 kPa and 0 to 21 MPa)
- Model 7250xi and 7250i provide advanced precision of 0.005 % of reading
- Model 7250 provides 0.003 % of full scale precision
- Stability: 0.0075 % of reading per year
- Time to setpoint: 20 seconds with no overshoot
- Control stability: 10 ppm
- Active matrix color screen with enhanced navigation menus
- Languages: English, French, Chinese, German, Japanese, Spanish and Italian
Close
Fluke 7250LP Low Pressure Controller/Calibrator
- Dual range, select from 10/30 inH2O or 20/60 inH2O or 35/100 inH20 range combinations
- Precision: 0.005 % of reading from 10 % to 100 % Full Scale (FS)
- Control stability: 0.004 % of each range
- Resolution to 0.0001 inH2O
- Time to set point: 30 seconds with no overshoot
- Languages: English, French, Chinese, German, Japanese, Spanish and Italian
Close
Fluke 7250Sys Multi-Range Pressure Calibration System
- Fully integrated multi-range pressure test and calibration systems
- Select either an 8-range or the 12-range system for maximum performance and coverage
- Single test port to connect device under test (DUT)
- Pressure ranges to 2 500 psi (170 bar)
- Internal vacuum pump for absolute mode and negative gauge mode operation. Optional internal gas booster for nitrogen source pressure efficiency
- High speed pressure control provides increased throughput
- Automatic range switching
- MET/CAL® driver available
- Languages: English, French, Chinese, German, Japanese, Spanish and Italian
Close
Fluke 7252, 7252i Dual Output Digital Pressure Controllers
- Dual range controller with independent test ports for each range
- Simultaneous pressure control for each range
- Select any range combination from 0 to 10 inH2O (25 mbar) to 0 to 2500 psi (172 bar).
- Two models to choose from, 7252i or 7252
- Time to setpoint < 15 seconds with no overshoot
- Languages: English, French, Chinese, German, Japanese, Spanish and Italian
Close
Fluke 729 150G FC Pressure Calibrator, 150 PSI, 10 Bar with Fluke Connect
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
Close
Fluke 729 150G Pressure Calibrator, 150 PSI, 10 Bar
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
Close
Fluke 729 300G FC Pressure Calibrator, 300 PSI, 20 Bar with Fluke Connect
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
Close
Fluke 729 300G Pressure Calibrator, 300 PSI, 20 Bar
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
Close
Fluke 729 30G FC Pressure Calibrator, 30 PSI, 2 Bar with Fluke Connect
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
Close
Fluke 729 30G Pressure Calibrator, 30 PSI, 2 Bar
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
Close
Fluke 729 Pressure Calibrator 300G FC, 300 PSI, 20 Bar with Fluke Connect
The Fluke 729 Automatic Pressure Calibrator has been designed specifically with process technicians in mind to simplify the pressure calibration
Close
Fluke 729/750SW BU 729 Automatic Pressure Calibrator and DPC/TRACK2 Software Bundle
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- Build instrumentation maintenance routes and load to Fluke 729 Automatic Pressure Calibrators
- Select downloaded tasks in the field configured to match field the instruments being calibrated
- Upload calibration results with field documented calibrations
- Track asset and loop configurations, allowing associated items to be managed as a group or individually
- Graphical user interface featuring DPC/TRACK Explorer. Use DPC/TRACK Explorer to easily navigate through all of the records and view calibrations that are coming due
Applications
- Oil & Gas
- Food & Beverage
- Water/Wastewater
- Pharmaceuticals
-10%
Close
Fluke 750P00 Pressure Module
Specifications
- Parameter/Range:0 to 1 in H2O (0 to 2.5 mBar)
- Burst Rating6: 30X
- Hi Side Media2: Dry Air
- Lo Side Media2: Dry Air
- Reference Uncertainty4: ± 0.15 %
- Total Uncertainty 1-year (15-35°C): ± 0.3 %
- Total Uncertainty 1-year1: ± 0.35 %
- Total Uncertainty 6-month (15-35°C): ± 0.25 %
- Total Uncertainty 6-month1: ± 0.30 %
-12%
Close
Fluke 750P01 Differential Pressure Module, 0-25 mBar, 3X Burst Rating
Features
- Parameter/Range:0 to 10 in H2O (0 to 25 mBar)
- Burst Rating6: 3x
- Hi Side Media2: Dry Air
- Lo Side Media2: Dry Air
- Reference Uncertainty4: ± 0.1%
- Total Uncertainty 1-year (15-35°C): ± 0.2%
- Total Uncertainty 1-year1: ± 0.3%
- Total Uncertainty 6-month (15-35°C): ± 0.15%
- Total Uncertainty 6-month1: ± 0.25%
-10%
Close
Fluke 750P01EX Pressure Module, 0-10 in H20 DIFF
Features
- Digital communication eliminates errors due to poor connections and electrical interference
- The modules are inherently temperature compensated from 0 to 50°C (32 to 122°F)
- The modules are fully interchangeable because all measurements are completed in the pressure module itself and then communicated to the calibrator in digitized form
- Modules are calibrated independently of the calibrator, and can be used with any 718Ex or 725Ex calibrator
- Each module has its own serial number to maintain independent traceability
- Rugged construction, urethane over molding protects against shock if dropped and seals against dirt, dust, and moisture ingress
- Pressure connections are ⅛” NPT female, easily converted using adapter set
- ¼” NPT Male, ¼” BSP/ISO and M20 male adapters are provided with each pressure module
- Convenient setup, one-meter cable between the pressure module and calibrator reduces the length of connecting tubing to the pressure source
- Three-year warranty, best in class compared to competitors one year warranty
- Added IEC-Ex certification for compliance in extended geographies
Comparing pressure module specifications, it is important to compare both the temperature range the time period the specifications apply. Matching the pressure range to the application is critical for best performance in performing a calibration.
Applications
- Instrument Maintenance
- Control Systems
- Safety Systems
- Process and Environmental Monitors
-10%
Close
Fluke 750P02 Pressure Module
Specifications
- Parameter/Range:0 to 1 psi (0 to 70 mBar)
- Burst Rating6:3x
- Hi Side Media2:Dry Air
- Lo Side Media2:Dry Air
- Reference Uncertainty4:± 0.050%
- Total Uncertainty 1-year (15-35°C):± 0.1%
- Total Uncertainty 1-year1:± 0.15%
- Total Uncertainty 6-month (15-35°C):± 0.075%
- Total Uncertainty 6-month1:± 0.125%
-10%
Close
Fluke 750P03 Pressure Module
Specifications
- Parameter/Range:0 to 5 psi (0 to 350 mBar
- Burst Rating6:3x
- Hi Side Media2:Dry Air
- Lo Side Media2:Dry Air
- Reference Uncertainty4:± 0.02%
- Total Uncertainty 1-year (15-35°C):± 0.04%
- Total Uncertainty 1-year1:± 0.05%
- Total Uncertainty 6-month (15-35°C):± 0.035%
- Total Uncertainty 6-month1:± 0.04%
-10%
Close
Fluke 750P04 Pressure Module
Specifications
- Parameter/Range:0 to 15 psi (0 to 1 bar)
- Burst Rating6:3x
- Hi Side Media2:Dry Air
- Lo Side Media2:Dry Air
- Reference Uncertainty4:± 0.0175%
- Total Uncertainty 1-year (15-35°C):± 0.035%
- Total Uncertainty 1-year1:± 0.045%
- Total Uncertainty 6-month (15-35°C):± 0.03%
- Total Uncertainty 6-month1:± 0.04%
Fluke 750P05 Gauge Pressure Module, 0-2 Bar, 4X Burst Rating
Features
- Parameter/Range:0 to 30 psi (0 to 2 bar)
- Burst Rating6:4x
- Hi Side Media2:316 SS
- Lo Side Media2:N/A
- Reference Uncertainty4:± 0.0175%
- Total Uncertainty 1-year (15-35°C):± 0.035%
- Total Uncertainty 1-year1:± 0.045%
- Total Uncertainty 6-month (15-35°C):± 0.03%
- Total Uncertainty 6-month1:± 0.04%
-10%
Close
Fluke 750P05EX Pressure Module, 0-30 PSIG
Features
- Digital communication eliminates errors due to poor connections and electrical interference
- The modules are inherently temperature compensated from 0 to 50°C (32 to 122°F)
- The modules are fully interchangeable because all measurements are completed in the pressure module itself and then communicated to the calibrator in digitized form
- Modules are calibrated independently of the calibrator, and can be used with any 718Ex or 725Ex calibrator
- Each module has its own serial number to maintain independent traceability
- Rugged construction, urethane over molding protects against shock if dropped and seals against dirt, dust, and moisture ingress
- Pressure connections are ⅛” NPT female, easily converted using adapter set
- ¼” NPT Male, ¼” BSP/ISO and M20 male adapters are provided with each pressure module
- Convenient setup, one-meter cable between the pressure module and calibrator reduces the length of connecting tubing to the pressure source
- Three-year warranty, best in class compared to competitors one year warranty
- Added IEC-Ex certification for compliance in extended geographies
Comparing pressure module specifications, it is important to compare both the temperature range the time period the specifications apply. Matching the pressure range to the application is critical for best performance in performing a calibration.
-10%
Close
Fluke 750P06 Gauge Pressure Module, 0-7 Bar, 4X Burst Rating
Features
- Parameter/Range:0 to 100 psi (0 to 7 bar)
- Burst Rating6:4X
- Hi Side Media2:316 SS
- Lo Side Media2:N/A
- Reference Uncertainty4:± 0.0175%
- Total Uncertainty 1-year (15-35°C):± 0.035%
- Total Uncertainty 1-year1:± 0.045%
- Total Uncertainty 6-month (15-35°C):± 0.03%
- Total Uncertainty 6-month1:± 0.04%
Applications
- Pressure instrument calibration
- Petro-Chemical
- Oil and Gas
- Pharmaceutical
- Water and wastewater
- Food and Beverage
- Power Generation
-10%
Close
Fluke 750P06EX Pressure Module, 0-100 PSIG
Features
- Digital communication eliminates errors due to poor connections and electrical interference
- The modules are inherently temperature compensated from 0 to 50°C (32 to 122°F)
- The modules are fully interchangeable because all measurements are completed in the pressure module itself and then communicated to the calibrator in digitized form
- Modules are calibrated independently of the calibrator, and can be used with any 718Ex or 725Ex calibrator
- Each module has its own serial number to maintain independent traceability
- Rugged construction, urethane over molding protects against shock if dropped and seals against dirt, dust, and moisture ingress
- Pressure connections are ⅛” NPT female, easily converted using adapter set
- ¼” NPT Male, ¼” BSP/ISO and M20 male adapters are provided with each pressure module
- Convenient setup, one-meter cable between the pressure module and calibrator reduces the length of connecting tubing to the pressure source
- Three-year warranty, best in class compared to competitors one year warranty
- Added IEC-Ex certification for compliance in extended geographies
Comparing pressure module specifications, it is important to compare both the temperature range the time period the specifications apply. Matching the pressure range to the application is critical for best performance in performing a calibration.
Applications
- Instrument Maintenance
- Control Systems
- Safety Systems
- Process and Environmental Monitors
-10%
Close
Fluke 750P07 Gauge Pressure Module, 0-35 Bar, 4X Burst Rating
Features
- Parameter/Range:0 to 500 psi (0 to 35 bar)
- Burst Rating6:4X
- Hi Side Media2:316 SS
- Lo Side Media2:N/A
- Reference Uncertainty4:± 0.0175%
- Total Uncertainty 1-year (15-35°C):± 0.035%
- Total Uncertainty 1-year1:± 0.045%
- Total Uncertainty 6-month (15-35°C):± 0.03%
- Total Uncertainty 6-month1:± 0.04%
Applications
- Pressure instrument calibration
- Petro-Chemical
- Oil and Gas
- Pharmaceutical
- Water and wastewater
- Food and Beverage
- Power Generation
