Replacement tips for TL910
Previous product
Back to products
Fluke T5-H5-1AC-KIT/US Electrical Tester Kit with Holster and 1AC II Voltage Tester
$438.00
Excluding GST 10%
Next product
Fluke Amprobe AT-6030 Advanced Wire Tracer Kit
$2,206.00
Excluding GST 10%
Fluke TP912 Replacement Probe Tips for Model TL910
$53.00Excluding GST 10%
Fluke TP912 Offers
- Five sets of gold plated and stainless steel tips
- One year warranty
Available on backorder
Related products
Close
DESMO LT240A15 – CAT IV Single Phase Loadtester
Features & Benefits
- Voltage: 240 – 250V max. 1Ø
- Load: 1100W – 4.5amp.
- Internal Fusing: 7amp.
- Safety Rating: Cat IV 600V – Cat III 1000V.
- Compliant to: AS: 61010.1: 2003.
- Weight: 420gm.
- Leads: Silicon with internal white wear indicator layer.
- Test Probes: Cat III 1000V.
- Motor: 1100W with thermal cut-out.
- Grills: Black Nylon 15% Glass Filled.
- Cable Grommet: TPE 90A Shore.
- Body: PC-ABS Fire Retardant – spark finish.
- Hook: Polished 316 S/S that allows hands free operation.
- Product Code: LT240A15
Close
Fluke Amprobe ACD-14-PRO Dual Display 600 A TRMS Clamp Multimeter
Product Features:
- Large LCD with dual display can show voltage and amps simultaneously
- True-RMS for accurate voltage measurements in noisy environments
- Low pass filter for current and voltage measurements on variable frequency drives
- Amp-Tip function for precise low current measurement down to 0.1 amp
- Ideal for HVAC applications with temperature, DC micro-amps and capacitance measurements
- Performs non-contact voltage detection (NCV)
- In-rush current measurement
- Audible continuity and diode test
- Data hold function
- Auto ranging instantly selects correct range
- Auto power off and low battery indicator
- Safety rated to CAT III 600 V
M1120 NST Neutral Supply Tester Kit
LCD screen to display measurement results and messages.
CAT IV 600V instrument and lead set compliance.
IP54 moisture and dust ingress rating.
Compact hand held unit housed in a lightweight heavy-duty case
Uniquely self powered passive device.
Power is taken directly from the user’s connections.
3 LED indicators and an LCD screen for status and measurement information.
An audible alarm is fitted internally as a secondary indicator. To indicate a pass at the end of the measurement cycle or a measurement failure.
Close
Fluke Amprobe AT-8030 Advanced Wire Tracer Kit
Key features
- Work directly on an energized circuit without the need to take equipment offline, CAT IV 600 V rated
- Save time searching for wires hidden behind walls, ceilings and floors with the Smart Sensor™, which displays the location and orientation of energized wires
- Pinpoint wire location with the large color LCD Receiver screen
- Identify breakers and fuses, as well as the location of a break, open or short
- Non-Contact Voltage Detection utilizes passive tracing without the Transmitter to verify if a wire is energized
- Includes the CT-400 Signal Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
Close
Fluke Amprobe ULD-420 ULTRASONIC LEAK DETECTOR WITH TRANSMITTER
Product Features:
- 20 kHz to 90 kHz frequency range: optimal range for detecting a variety of leakage events
- Adjustable Transmitter signal strength for accurate leak pinpointing
- 3 filters to remove main noise frequencies in noisy environments
- 2.5″ LCD display with bargraph
- Adjustable Receiver Sensitivity
- Industrial headphones to help identify the source of the leak
- Parabola accessory directs the ultrasound towards the sensor
- Detachable Tubular Extension provides additional reach in hard to reach areas
Close
Fluke Amprobe ULD-400-T ULTRASONIC TRANSMITTER
Amprobe ULD-400-T Offers
Features
- Speaker
- Three LEDs: high/medium/low signals
- Low battery indicator
- Signal level “+/-” button
- On/Off button
Applications
- Fluid or gas tanks
- Building windows, doors or roofs
- Car windows and windshields
- HVAC/R vents
- Refrigerant pipelines
Close
Fluke CXT280
Product Features:
- Unbreakable
- Watertight
- Airtight
- Dustproof
- Chemical resistant
- Corrosion proof
- Buoyancy allows case to float in salt water with 7.94 lb load
- Automatic purge valve for quick equalization after changes in atmospheric pressure
- Features 0.25 in neoprene O-ring and ABS latches for excellent seal
- For use with many Fluke instruments
- For use with Fluke Multimeters and Earth Ground Testers
Close
Fluke T5-H5-1AC-KIT/US Electrical Tester Kit with Holster and 1AC II Voltage Tester
Features
- Reliable electrical tester automatically measures volts AC and volts DC with precise digital resolution
- Automatically measure AC and DC voltage up to 1000 V with precise digital resolution
- Measure current up to 100 A without breaking the circuit with OpenJaw™ design
- Troubleshoot resistance problems up to 1000 Ω
- Work in tight spaces with detachable Slim Reach probe tips
- Withstands a 10′ (3 m) drop
- Offers Auto-off mode to conserve battery life
- Fits into an optional holster that attaches to a belt and neatly stows test leads
- Protected to EN61010-1 CAT IV 600 V / CAT III 1000 V rating
- Integrated protection circuit allows it to stay connected to a voltage source longer than a solenoid tester
- UL and CSA approved
Automatically measure AC and DC voltage up to 1000 V with precise digital resolution
- Auto-selects between AC and DC voltage
- Suitable for industrial applications
Measure current up to 100 A without breaking the circuit with OpenJaw™ design
- OpenJaw™ design allows for fast and easy current measurement
- Measure current more safely without metallic contact
Troubleshoot resistance problems up to 1000 Ω
- Measure resistance when troubleshooting motors, HVAC/R systems or electrical systems
- Built in continuity beeper provides fast and easy go/no-go tests
Work in tight spaces with detachable Slim Reach probe tips
- Features a compact design with handy probe storage, easily fits in one hand
- The test lead slot in the back makes the meter an “extended handle” for the probe, leaving the other hand free to place the second lead
- Test leads accept Fluke accessory test clips
Fluke 1AC-A1-II AC Voltage Detector
Easy to carry in your shirt pocket and with continuous self-test so you always know that it’s working, this non-contact voltage detector allows you to quickly test for energized circuits in the workplace or at home.
Features
- Voltage detection of 90 to 1000V AC or 200 to 1000V AC
- Rugged and reliable
