Designed for electrical installation professionals, the tester with Bluetooth provides the tests required to verify the safety of commercial, industrial, and residential low-voltage electrical installations. Features continuous testing that can be carried out by use of the test button lockdown as well as three selectable test voltages: 250, 500, and 1000 V
Previous product
Back to products
Kyoritsu 6010B Multifunction Electrical Tester
$830.00
Excluding GST 10%
Next product
Kyoritsu 2056R True RMS AC/DC Digital Clamp Meter, 1000A/600V
$425.00
Excluding GST 10%
Kyoritsu KEW6516BT Multi-Function Tester with Bluetooth
$2,465.00Excluding GST 10%
Features
- Color LCD 3.5″ dot matrix
- Anti-trip technology (with 2 and 3 wire) for no trip LOOP L-PE testing on all RCDs
- With 2 wires only, very useful in case of no neutral (i.e. three-phase motor lines)
- High test current range of 2 Ω with 0.001 Ω resolution
- Zs Limit compares the values required by electrical installations standard with measured results
- Type AC, A, F, B (General and Selective), EV and Variable RCDs
- Single and auto test, ramp test and contact voltage
- Earth resistance test 2 and 3 wires with all accessories included
Related products
Close
Fluke PRV240 Proving Unit, 240V
Fluke PRV240 Offers
Reduces the risk of shock and arc flash by removing unnecessary exposure to a potentially hazardous electrical environment while verifying the functionality of test tools before and after absence or presence of voltage is checked.
Features
- Sources both AC and DC steady-state voltage – supplies 240 V DC/AC
- A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
- Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
- Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
- Long battery life – 5,000 tests per set of four AA batteries
Test Before Touch
Provides a safe method to verify that your electrical test tool is operating properly before you conduct further tests. The concept of “Test Before Touch” (TBT) or three point test method involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.
Designed for safety and compliance
Safe and easy method for verifying proper operation of your test tool before attempting to test for either an energized source or a de-energized source without the need for cumbersome PPE, or in cases where no known voltage source is available. Your environment may still require minimal PPE such as hard, safety glasses or earplugs when using a proving unit.
Close
Fluke Amprobe ACD-14-PRO Dual Display 600 A TRMS Clamp Multimeter
Product Features:
- Large LCD with dual display can show voltage and amps simultaneously
- True-RMS for accurate voltage measurements in noisy environments
- Low pass filter for current and voltage measurements on variable frequency drives
- Amp-Tip function for precise low current measurement down to 0.1 amp
- Ideal for HVAC applications with temperature, DC micro-amps and capacitance measurements
- Performs non-contact voltage detection (NCV)
- In-rush current measurement
- Audible continuity and diode test
- Data hold function
- Auto ranging instantly selects correct range
- Auto power off and low battery indicator
- Safety rated to CAT III 600 V
Close
Fluke EI-162AC Clip on Current Transformer
Fluke Clip-On Current Transformer Features
- Performs selective and stakeless testing
- Inner diameter: 2 in.
- For use with Models 1623 and 1625
Close
Fluke Amprobe AT-8030 Advanced Wire Tracer Kit
Key features
- Work directly on an energized circuit without the need to take equipment offline, CAT IV 600 V rated
- Save time searching for wires hidden behind walls, ceilings and floors with the Smart Sensor™, which displays the location and orientation of energized wires
- Pinpoint wire location with the large color LCD Receiver screen
- Identify breakers and fuses, as well as the location of a break, open or short
- Non-Contact Voltage Detection utilizes passive tracing without the Transmitter to verify if a wire is energized
- Includes the CT-400 Signal Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
Close
Fluke Amprobe USB-KIT2 Download Module for Amprobe Clamps
Product Features:
- Software for Transferring Data to PC
- Includes Connection Cable
- For Amprobe Clamp Meters
Close
Fluke LVD1A Volt Light
- Built-in flashlight
- Detector glows blue when AC voltage is present
- Detector glows red when it is at the source
Close
DESMO LT240A15 – CAT IV Single Phase Loadtester
Features & Benefits
- Voltage: 240 – 250V max. 1Ø
- Load: 1100W – 4.5amp.
- Internal Fusing: 7amp.
- Safety Rating: Cat IV 600V – Cat III 1000V.
- Compliant to: AS: 61010.1: 2003.
- Weight: 420gm.
- Leads: Silicon with internal white wear indicator layer.
- Test Probes: Cat III 1000V.
- Motor: 1100W with thermal cut-out.
- Grills: Black Nylon 15% Glass Filled.
- Cable Grommet: TPE 90A Shore.
- Body: PC-ABS Fire Retardant – spark finish.
- Hook: Polished 316 S/S that allows hands free operation.
- Product Code: LT240A15
Close
Fluke 720A Kelvin-Varley Divider (Copy)
- 0.1 ppm resolution, seven decades
- 0.1 ppm of input absolute linearity
- Built-in self calibration bridge
- Front panel self-calibration
