The ID caps are used with the Fluke Networks NX8 Pocket Toner enabling the toner to indicate continuity on eight cables simultaneously.
Previous product
Back to products
PTNX8-VV-PRO - Fluke Networks Pocket Toner NX8 Voice and Video Pro Kit
$360.00
Excluding GST 10%
Next product
PTNX8-DLX - Fluke Networks Pocket Toner NX8 Deluxe Kit
$308.00
Excluding GST 10%
PTNX8-ID-1-8 – Fluke Networks Accessory 8 PTNX8 ID Caps
$123.00Excluding GST 10%
Fluke Networks PTNX8-ID-1-8 Set Of Pocket Toner NX8 ID Caps (Cap #1 – #8)
- PTNX8-ID-1-8 Accessory 8 PTNX8 ID Caps
Available on backorder
Related products
Close
DESMO LT240A15 – CAT IV Single Phase Loadtester
Features & Benefits
- Voltage: 240 – 250V max. 1Ø
- Load: 1100W – 4.5amp.
- Internal Fusing: 7amp.
- Safety Rating: Cat IV 600V – Cat III 1000V.
- Compliant to: AS: 61010.1: 2003.
- Weight: 420gm.
- Leads: Silicon with internal white wear indicator layer.
- Test Probes: Cat III 1000V.
- Motor: 1100W with thermal cut-out.
- Grills: Black Nylon 15% Glass Filled.
- Cable Grommet: TPE 90A Shore.
- Body: PC-ABS Fire Retardant – spark finish.
- Hook: Polished 316 S/S that allows hands free operation.
- Product Code: LT240A15
Close
Fluke Amprobe AT-8030 Advanced Wire Tracer Kit
Key features
- Work directly on an energized circuit without the need to take equipment offline, CAT IV 600 V rated
- Save time searching for wires hidden behind walls, ceilings and floors with the Smart Sensor™, which displays the location and orientation of energized wires
- Pinpoint wire location with the large color LCD Receiver screen
- Identify breakers and fuses, as well as the location of a break, open or short
- Non-Contact Voltage Detection utilizes passive tracing without the Transmitter to verify if a wire is energized
- Includes the CT-400 Signal Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
Close
Fluke Amprobe USB-KIT3 Download Module for Amprobe Precision Multimeters
Product Features:
- PC Interface Kit
- Download software with connection cable
- For Amprobe Multimeters
Close
Fluke INDC8 – Insulated Heavy Duty Diagonal Cutter
Product Features:
- Nominal length: 8 in., 200 mm
- Cuts hard materials including steel and piano wire
- Power joint and precision cutting edges
- German CMV steel
- Designed to block potentially hazardous voltages from reaching you
- Subjected to a 10,000 V dielectric strength test, protection protection works
- Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab)
- Comply to international standards such as IEC 60900 and ASTM F1505
- Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation
- Critical protective component between you and unplanned incident
Close
Fluke Amprobe MTL-EARTH 4 Earth Roads With Leads
- 4 Earth Roads with Leads
- For use with the Amprobe DM-III Multitest and DM-III Multitest Flex Power Quality Recorders
Close
Fluke 752A Reference Divider
- 10:1 and 100:1 divider outputs
- Output uncertainty 0.2 ppm and 0.5 ppm
- Built-in calibration bridge
- Dynamic Resistor Matching™
- System switching for ease of use
- Operating modes
Close
Fluke PRV240 Proving Unit, 240V
Fluke PRV240 Offers
Reduces the risk of shock and arc flash by removing unnecessary exposure to a potentially hazardous electrical environment while verifying the functionality of test tools before and after absence or presence of voltage is checked.
Features
- Sources both AC and DC steady-state voltage – supplies 240 V DC/AC
- A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
- Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
- Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
- Long battery life – 5,000 tests per set of four AA batteries
Test Before Touch
Provides a safe method to verify that your electrical test tool is operating properly before you conduct further tests. The concept of “Test Before Touch” (TBT) or three point test method involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.
Designed for safety and compliance
Safe and easy method for verifying proper operation of your test tool before attempting to test for either an energized source or a de-energized source without the need for cumbersome PPE, or in cases where no known voltage source is available. Your environment may still require minimal PPE such as hard, safety glasses or earplugs when using a proving unit.
Close
Fluke EI-162AC Clip on Current Transformer
Fluke Clip-On Current Transformer Features
- Performs selective and stakeless testing
- Inner diameter: 2 in.
- For use with Models 1623 and 1625
