The Fluke Ti300+ helps teams find issues before they are fully formed problems. It has the resolution and accuracy needed to clearly reveal temperature differentials or demonstrate progressive heat changes over time. With LaserSharp™ AutoFocus the Ti300+ ensures focused images – every single time. With the touch of a button, use the built-in laser distance meter to calculate and display the distance to your designated target on the camera screen and snap the image in focus. Most importantly, temperature readings from in focus images will be highly accurate. Enable your team to get clear images while maintaining a safer distance from operating equipment.
Previous product
Back to products
Fluke TI300+ 60HZ Thermal Imager
$9,750.00
Excluding GST 10%
Next product
Fluke VL1735/45 banana 4-phase voltage lead set for Fluke 1735/45
$640.00
Excluding GST 10%
Fluke FLK-TI300+ 9Hz 320 x 240 Thermal Camera
$9,750.00Excluding GST 10%
Features:
- 320 x 240 resolution
- 2 meter drop test
- LaserSharp™ Auto Focus
- Manual or automatic focus
- Measure up to 650 °C
Specifications:
- IFOV with standard lens (spatial resolution): 1.85 mRad, D:S 532:1
- Detector resolution: 320 x 240
- SuperResolution: No
- Infrared Resolution: 76,800 pixels
- MultiSharp™ Focus: No
- LaserSharp Auto Focus: Yes, for consistently in-focus images
- Laser distance meter: Yes, calculates distance to the target for precisely focused images and displays distance on screen
- Advanced manual focus: Yes
- Ruggedized touchscreen display: 3.5 inch (landscape) 640 x 480 LCD
- Rugged, ergonomic design for one-handed use: Yes
- Digital zoom: No
- Temperature measurement range (not calibrated below -10 °C): -20 °C to 650 °C (-4 °F to 1202 °F)
- Accuracy: ±2 °C or 2% (at 25 °C nominal, whichever is greater)
- Thermal sensitivity (NETD)*: ≤ 0.075 °C at 30 °C target temp (75 mK)
- On-screen emissivity correction: Yes (both value and table)
- On-screen reflected background temperature compensation: Yes
- On-screen transmission correction: Yes
- IR-Fusion technology: Adds the context of the visible details to your infrared image
- AutoBlend mode: Min, Mid, Max IR plus full visible on camera; continously variable in software
- Picture-In-Picture (PIP): Yes
- Built-in digital camera (visible light): 5 MP
- Lenses:
- Standard lens
- Optional 2x telephoto smart lens
- Optional 4x telephoto smart lens
- Optional wide-angle smart lens
- Extensive memory options: Removable 4 GB micro SD memory card, 4 GB internal flash memory, save to USB flash drive capability, upload to Fluke Cloud™ for permanent storage
- Image capture, review, save mechanism: One-handed image capture,review, and save capability
- Image file formats: Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2); no analysis software required for non-radiometric (.bmp, .jpg and .avi) files
- Memory review: Thumbnail and fullscreen review
- Laser pointer: Yes
- Frame rate: < 60 Hz
- Color alarms: High temperature, low temperature, isotherms (within range)
- Infrared spectral band: 7.5 μm to 14 μm
- Operating temperature: -10 °C to +50 °C (14 °F to 122 °F)
- Storage temperature: -20 °C to +50 °C (-4 °F to 122 °F) without batteries
- Relative humidity: 10 % to 95 %, non-condensing
- Center-point temperature measurement: yes
- Spot temperature: Hot and cold spot markers
- User-definable spot markers: 3
- User defined measurement boxes: Expandable-contractible measurement box
- Safety standards: IEC 61010-1: Overvoltage category II, Pollution Degree 2
- Electromagnetic combability: IEC 61326-1: Basic EM environment. CISPR 11: Group 1, Class A
- Australian RCM: IEC 61326-1
- Vibration: 0.03 g2/Hz (3.8 g), 2.5 g IEC 60068-2-6
- Shock: 25g, IEC 68-2-29
- Dimensions (L x W x H): 277mm x 122mm x 167mm
- Weight: 1.04kg
Warranty:
- 2 year warranty covered by Fluke
Available on backorder
Related products
Close
Fluke 435-II Three Phase Power Quality Analyzers
Key features
The Fluke 435-II products are designed for users who need to get to the solution of the power quality problem as quickly as possible so that they can minimize expensive downtime. The measurement process and display of data is optimized to get to the most important information as quickly as possible. Multiple parameters are measured simultaneously and displayed in formats that quickly describe overall power quality health while giving you the detailed information you need to make better maintenance decisions. Data can be quickly accessed as simple digital values, trend graphs that give you fast insight into changes over time, waveforms, phasor diagrams or analyzed and organized into tabular format such as the event data where the magnitude, duration and time stamping enable rapid correlation to the problems you are experiencing in your facility.
Energy loss Calculator—Calculate money lost to energy waste in terms of real dollars.
It’s a simple fact, poor power quality can have a big impact on the bottom line. The Fluke 435-II enables you to identify issues and measure energy loss giving you specific insight into the amount of loss in dollars associated things like effective power and with poor power quality characteristics such as reactive power, unbalance, distortion, or neutral current. The 435-II even offers users the flexibility to input cable length and cable diameter so you can calculate loss due to conductor sizing (Or use AUTO mode if you don’t know your cable specification) and enter up to four unique time-dependent daily rates (kWh) for more accurate calculations. Armed with this critical data users can easily justify the investment necessary to take countermeasures.
Close
Fluke 190 Series II 500MHz 2 Channel ScopeMeter Oscilloscope
Features
- Four independent isolated input channels
- 60, 100, 200 and 500 MHz bandwidths
- Sample rate: Up to 2.5 GS/s
- Sample rate resolution: Up to 400 ps
- Deep memory: 10,000 point per trace waveform capture
- CAT III 1000 V / CAT IV 600 V safety rating
- Seven hour, high performance Li-ion batteries
- Battery door for convenient battery access
- Isolated USB ports for memory devices and PC connectivity
Close
Fluke 190 Series II 100MHz 4 Channel ScopeMeter Oscilloscope
Features
- Four independent isolated input channels
- 60, 100, 200 and 500 MHz bandwidths
- Sample rate: Up to 2.5 GS/s
- Sample rate resolution: Up to 400 ps
- Deep memory: 10,000 point per trace waveform capture
- CAT III 1000 V / CAT IV 600 V safety rating
- Seven hour, high performance Li-ion batteries
- Battery door for convenient battery access
- Isolated USB ports for memory devices and PC connectivity
Close
Fluke 1555 FC w/IR3000FC 10 kV Insulation Tester with IR3000 FC Connector
Features
- Test voltages to up 10 kV and save time by trending on the spot only with Fluke Connect™
- CAT III 1000 V, CAT IV 600 V safety rating
- Warning function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC for increased user safety
- Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V
- Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
- Long battery life gives the user over 750 tests between charges
- Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
- Guard system eliminates the effect of surface leakage current on high-resistance measurements
- Large digital/analog LCD for easy viewing
- Capacitance and leakage current measurement
- Ramp function for breakdown testing
- Resistance measurements up to 2 TΩ
- Timer settings up to 99 minutes for timed tests
- 3-year warranty
Close
Fluke 1738/EUS Three-Phase Power Loggers
Key features
- Three-phase advanced Fluke Connect compatible-power logger for making critical power quality and energy decisions in real-time
- Automatically captures and logs voltage, current, power, harmonics and associated power quality values.
- Provides the highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
- Automatically logs all measured values and stores more than 20 separate logging sessions
Close
Fluke 190 Series II 500MHz 4 Channel ScopeMeter Oscilloscope
Features
- Four independent isolated input channels
- 60, 100, 200 and 500 MHz bandwidths
- Sample rate: Up to 2.5 GS/s
- Sample rate resolution: Up to 400 ps
- Deep memory: 10,000 point per trace waveform capture
- CAT III 1000 V / CAT IV 600 V safety rating
- Seven hour, high performance Li-ion batteries
- Battery door for convenient battery access
- Isolated USB ports for memory devices and PC connectivity
Close
Fluke 1663 Multifunction Installation Tester
Features
- 500V AC/DC voltage measurement TRMS
- 0.1V resolution & 3.3MΩ input impedance
- 660V RMS overload protection
- 20, 200, & 2000Ω auto-ranging continuity test
- 0.01, 0.1, & 1Ω resolution
- >4V open circuit voltage
- L-N, L-PE, N-PE inputs
- 50, 100, 250, 500, & 1000V insulation test voltages
- Test smooth DC sensitive RCDs (Type B/B+)
- 200 & 2000Ω earth resistance test
- 0.1 & 1Ω resolution
- 125Hz frequency & 25V output voltage
- On/Off switchable auto-start for RCD & Looptest
- Time & date (with optional FlukeView software)
- IP40 rated housing
- Complies with IEC/EN, UL, ANSI/ISA, & CAN/CSA
Close
Fluke 1503 Insulation Resistance Tester
Key features
- A rugged, compact insulation resistance tester for residential and commercial electricians
- Performs insulation tests from 0.01 MΩ to 2000 MΩ
- Offers two insulation test voltages: 500 V and 1000 V
- Includes live circuit detection to prevent insulation test if voltage >30 V is detected
- Measures resistance from 0.01 Ω to 20.00 kΩ
