Close
Fluke 9230 Gallium Cell Maintenance Apparatus
- One week plateau duration
- No hassle automatic realizations
- Used daily in our Primary Lab
Close
Fluke 9260 Mini Fixed-Point Cell Furnace
- Good introduction to fixed-point calibration
- User friendly and inexpensive
Close
Fluke 9500B Oscilloscope Calibrator
- Full automation provides totally hands-free oscilloscope calibration – even on today’s ultra-high performance, multi-channel, feature rich instruments.
- Continuous upgradeability helps you protect your investment in the tools you need to manage ever changing workload demands.
- Simultaneous output on 5 channels means no more lead changing and no more complicated signal multiplexers or impedance matching networks.
- Leveled sinewaves to 6.0 GHz and edges to 70 ps provide all the performance and flexibility you need to fully calibrate today’s and tomorrow’s high performance oscilloscopes.
- Fluke Calibration’s unique Active Head Technology™ generates calibration signals right at the oscilloscope input – now there is no doubt whether waveform aberrations are down to connecting leads or the oscilloscope itself.
Close
Fluke 9600FLT 1 GHz Wide Offset Phase Noise Filter
Use the Filter only at 1 GHz. It rejects phase noise at offsets greater than 1 MHz from the 1 GHz carrier (both sidebands are rejected). Use the filter only when the phase noise specification of the 96xx RF Reference Source is not considered sufficient for the target workload. Only the highest performance spectrum analyzers are likely to require the filter. The filter connects in series with the umbilical lead of the 9640A-50 or 9640A-75 Leveling Head. Use the supplied mounting kit to conveniently attach the filter to the front left handle of the Reference Source. This mount is fully compatible with the Y9600 Rack Mount accessory.
Close
Fluke 96040A Low Phase Noise Reference Source
- Covers a broad range of RF calibration workload
- Reduces the number of instruments and interconnections required for your RF calibration system
- “What you set is what you get” accurate signal delivery direct to the DUT input
- Integrated 50 MHz frequency counter eliminates need for an additional instrument • Calibration-specific interface simplifies technician tasks
- Simplifies uncertainty calculations by delivering known signals direct to the device under test (DUT)
- Lowers RF system maintenance costs
- With automation, reduces spectrum analyzer calibration times by as much as 50% over manual methods
Close
Fluke 96270A 27 GHz Low Phase Noise Reference Source
- “Self-characterization” lets you avoid calculating correction factors for each component in the signal delivery system
- “What you set is what you get” accurate signal delivery direct to the UUT input up to 27 GHz
- Covers a broad range of RF calibration workload
- Reduces the number of instruments and interconnections required for your RF calibration system
- Integrated 300 MHz frequency counter and dual power meter readout eliminate need for additional instruments
- Calibration-specific interface simplifies technician tasks
- Simplifies uncertainty calculations
- Lowers RF system maintenance costs
- With automation, reduces spectrum analyzer calibration times by as much as 50 % over manual methods
Close
Fluke A40B Series Precision DC and AC Current Shunts
- Simplifies calibration/verification of precision calibrators and current sources
- Shunts sized for currents from 1mA to 100A
- Usable from dc to 100 kHz
- 14 individual dc and ac current shunts with a 1, 2, 5 sequence over 6 decades of current
- Simple direct measurements, making ac/dc transfers unnecessary
- Stability typically better then ± 5.0 µΩ/Ω for one year
- Typical angular accuracy of better than ± 0.003º at 1 kHz
-10%
Close
Fluke BP7235 Ni-MH Battery Pack, 7.2V, 2500 mA-hour
Fluke BP7235 Offers The Fluke BP7235 is a 7.2V 2500 mA-hour rechargeable Ni-MH battery pack. Provides typical 16-hour battery life
-10%
Close
Fluke BP7240 Battery Pack
Li-Ion battery pack for the 75X Documenting Process Calibrator.
Close
Fluke Calibration 1523 Single Channel Reference Thermometer
Features
- Sensor types: PRTs, RTDs, thermistors, and thermocouples
- PRT Accuracy: up to ± 0.011 °C
- Thermocouple Accuracy: up to ± 0.24 °C
- Precision thermistor Accuracy: ± 0.002 °C
- Two models:
- 1523: Single channel standard model with memory for 25 readings
- 1524: Two channels; memory for logging 15,000 measurements
- 0.3 second typical sample interval
- Thermocouple types C, E, J, K, L, M, N, T, U, B, R, S
- Statistics: maximum, minimum, average, standard deviation
Close
Fluke Calibration 1524 Dual Channel Reference Thermometer
Features
- Sensor types: PRTs, RTDs, thermistors, and thermocouples
- PRT Accuracy: up to ± 0.011 °C
- Thermocouple Accuracy: up to ± 0.24 °C
- Precision thermistor Accuracy: ± 0.002 °C
- Two models:
- 1523: Single channel standard model with memory for 25 readings
- 1524: Two channels; memory for logging 15,000 measurements
- 0.3 second typical sample interval
- Thermocouple types C, E, J, K, L, M, N, T, U, B, R, S
- Statistics: maximum, minimum, average, standard deviation
Close
Fluke Calibration Bath Fluids
- Thermal characteristics
- Lifetime
- Change in characteristics due to temperature cycling
- Absorption of water from the air
- Vaporization—fumes and fume hood requirements
- Expansion due to heat
- Contamination—mixing oils or introducing contamination with unclean probes
- Conductivity properties
- Effects of using fluids outside of their range—fire, explosion, polymerization
- Effects of altitude on boiling point
Close
Fluke COMPASS® for Flow software
- molbox1
- molbox1+
- molbox1+S
- molbox RFM
- MFC-CB
- MFC Switchbox
Close
Fluke COMPASS® for molbox™ software
- Usable on any PC with a 32-bit Windows OS and available COM port.
- Supports both molbox1+ and molbox RFM.
- A true Windows® application following Windows protocol for file management, menu and message formatting, graphics and editing. Other applications can be run without interrupting test execution.
- Complete online Help facility with Tool Tips.
- Customizable user interface with scalable windows.
- Calibrate and test a wide variety of devices including: MFCs, MFMs, rotometers, turbine meters, bubble meters and others.
- Fully automated testing of both analog and digital MFCs.
- Automated flow control support for testing flow measure only devices.
- Flow corrections with automated ambient pressure and temperature entry for density dependent DUTs.
- Log extra data from the DUT during the test with user defined commands.
- Open hardware configuration allows simple integration of third party acquisition, control, and pressure and temperature measurement hardware.
- Sets up and maintains DUT database with unique DUT characteristics, test scripts and histories.
- Process gas editing tool includes complete gas conversion factors for most major MFC manufacturers and automatically calculates conversion factors for missing relationships and blends.
- Produces standard, delimited test data files which easily import into other software programs if desired.
- Test data files stored in user definable directory structure.
- 100% customizable test report generation tool with preformatted templates.
- Extensive on-board plotting function to create a variety of test data plots.
Close
Fluke Constant Volume Valve
The constant volume valve is used in piston gauge crossfloats and other applications in which two high pressures need to be disconnected and reconnected with minimal purturbations on either side.
Close
Fluke Custom Systems
- Turn-key pressure calibration rack
- Portable calibration carts
- Automated pressure calibration system
Close
Fluke Custom Temperature Calibration Baths
Our engineers and designers know more about temperature calibration baths than anyone else. You’ll find our baths throughout the best national and international temperature calibration labs. It does not matter what type of calibration application you have – oceanography, missile optics, infrared, sensor manufacturing, semiconductor, renewable energy, LIG manufacturing, or down-hole tools. We have probably already built baths to do the job.
Close
Fluke DH400 High Pressure Flex Tubes
- Lightweight – Tube weight is only 0.5 oz/yd of length (16 g/m).
- Working Pressure – Up to 6 000 psi (40 MPa).
- Flexibility – Bending radius of 15/16 in. (2.4 cm) at maximum operating pressure.
- Temperature – No derating of operating pressure for temperatures from -30 °F to 140 °F, (-34 °C to 60 °C).
- Weather – Inert to ozone and ultraviolet
- Safety – Burst pressure of 20,000 psi (140 MPa) for a 3.3 margin with operating pressure.
- Aging – Negligible humidity absorption
- Growth – Less than 5% physical change overall at maximum operating pressure
- Chemical Resistance – Compatible with an extremely wide range of liquid and gas media
Close
Fluke FLUKE-729/750SW BU 729 Automatic Pressure Calibrator and DPC/TRACK2 Software Bundle
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- Build instrumentation maintenance routes and load to Fluke 729 Automatic Pressure Calibrators
- Select downloaded tasks in the field configured to match field the instruments being calibrated
- Upload calibration results with field documented calibrations
- Track asset and loop configurations, allowing associated items to be managed as a group or individually
- Graphical user interface featuring DPC/TRACK Explorer. Use DPC/TRACK Explorer to easily navigate through all of the records and view calibrations that are coming due
Applications
- Oil & Gas
- Food & Beverage
- Water/Wastewater
- Pharmaceuticals
Close
Fluke GB Gas Booster
- Hands free and self regulating package – can be mounted out of the way (under a bench or behind a partition)
- Two high pressure output ranges:
– GB-75: pressure up to 10,000 psi(70 MPa)
– GB-K-152: pressure up 15,000 psi (103 MPa)
Close
Fluke GFS dynamic gravimetric mass flow system
- Covers the range of 0.2 to 200 mg/s in various gases (10 sccm to 10 slm N2)
- Supported gases: Non-corrosive, non-toxic gases
- Flow measurement uncertainty as low as ± 0.013% of reading
- Maximum outlet pressure: 650 kPa absolute
- Primary gravimetric principle using mass and time measurement
- Automated unattended operation possible
Close
Fluke ITS-90 Fixed-Point Cells
- Best cell uncertainties commercially available
- Every ITS-90 fixed point available from argon to copper
- Plateaus last days (gallium for weeks and TPW for months)
- Manufactured and tested by Fluke Calibration’s primary standards scientists
Close
Fluke Liquid Trap
- Working pressure range – 3000 psi (206 bar)
- Includes convenient drain valve and mounting stand
- Place between device under test and calibrator
- 1/4 inch NPT fittings
- Can be used with any calibrator including Fluke Calibration Series 7215 Controllers, Druck DPI 515 and others
Close
Fluke MET/CAL® Calibration Management Software
- Perform automated calibration on all kinds of test and measurement tools and equipment, including dc/lf, RF and microwave instruments.
- Create, edit, test, and document calibration procedures, quickly and easily.
- Configure and report a wider range of measurement uncertainty parameters and include verification data to provide an audit trail and support further analysis.
- Track asset information including work order history and status, traceability, users, customers, and location.
- Analyze and report asset information; produce customized printed certificates and reports.
- Make data available to other corporate systems.
- Import asset and calibration data into MET/TEAM software
- Help meet the requirements of quality standards like ISO 9000, ISO/IEC 17025, NRC 10 CFR, ANSI Z540.3, and others.
Close
Fluke MET/CAL® Warranted Calibration Procedures
MET/CAL® core calibration procedures
A number of example procedures are supplied free with MET/CAL®. You may download these calibration procedures from this website, use them ‘as is’ or as a template for developing your own custom procedures to fit your operation’s specific requirements and calibration workload.
Close
Fluke MET/TEAM® Test Equipment Asset Management Software
- Manage all aspects of your calibration operation with one paperless solution
- Improve productivity and reduce operating costs
- Maintain compliance with regulatory standards
- Configure and customize for your business rules
- Report to meet a wide range of requirements
- Schedule maintenance events
- Perform batch receiving
- Create, track and close work orders
- Track assets as they move through the lab
- Create and print calibration reports
- Maintain an audit trail
- Manage shipping information
- Track customer and vendor information
- View business statuses
- Create data templates and store procedures
- …and much more
Close
Fluke MFC Switchbox™ for molbox1+ and MFC-CB™
MFC Switchbox supplies power and switches between up to five MFC or MFMs on one molbox1+ or MFC-CB channel.
The MFC switchbox is an accessory to the molbox1+ MFC option and MFC-CB mass flow control box. This accessory continuously powers up to five MFCs and/or MFMs (DUTs) and allows switching control between them on one molbox1 or MFC-CB channel.
Close
Fluke MFC-CB Control Box
- Set and read gas mass flow controller and mass flow meter instruments
- Set and read 0 to 5 V or 4 to 20 mA on two (2) channels simultaneously
- Complete front panel local control and remote operation via RS-232 and IEEE-488 interfaces
- Includes advanced features such as two (2) channel sum, difference and ratio
- Displays in V, mA, % FS and flow units
- Handles gas conversion (K) factors automatically
- Switch each channel between five (5) channels using an MFC Switchbox™
- Common look, feel and protocol with other molbloc/ molbox™ flow products
- Compatible with COMPASS® for molbox software to set up automated molbloc/molbox based flow systems
Close
Fluke Mini Fixed-Point Cells
- Lower uncertainties than comparison calibrations
- All ITS-90 fixed points from TPW to copper
- Reduced equipment and annual recalibration costs
Close
Fluke molbloc-L Laminar Flow Element
- Useable with existing molbox1+ and molbox RFM mass flow terminals and COMPASS software
- Integrated filter to protect against contamination
- Integral gas temperature conditioning and measurement
- Continuous, real-time reading
- Can be fully automated
- No moving parts
Close
Fluke molbloc-S Sonic Nozzle Calibration Device
- Covers ranges up to 5,000 slm in N2 and air
- Useable with molbox1+, or existing molbox1 and molbox RFM mass flow terminals and COMPASS software
- Proven critical flow venturi (sonic) nozzle operating principle supported by gravimetric calibration
- Minimal sensitivity to contamination
- Measurement uncertainty:
to ±0.125% of reading with molbox1+
± 0.2 % of reading with molbox1
± 0.5 % of reading with molbox RFM - Air, N2, Ar, He and other calibrations available, humid air density compensation supports use with ambient air
- Excellent rangeability (10:1 turndown), with molbox1+S, or other molbox models with vacuum.
- Redundant absolute upstream pressure measurement using both molbox absolute pressure transducers reduces uncertainty and increases reliability
- Integral gas temperature conditioning and measurement
- Continuous, real-time reading, as with traditional molbloc-L laminar element
- Can be fully automated
Close
Fluke molbox1+ Flow Terminal
- molbox1+S configuration gives extra rangeability with molbloc-S elements without requiring vacuum pumps
- Now use any molbloc element for both high and low pressure applications in the same gas
- Even more robust internal pneumatic design
- Full suite of software automation products and hardware accessories to create a complete gas flow calibration system—including new COMPASS® for Flow calibration assistance software
Close
Fluke molstic-L Mounting Systems
molstic molbloc mounting systems are available to assist you in realizing the full performance benefits of your molbloc/molbox™ system. molstics provide an engineered solution to the practical issues of mounting the molbloc, connecting a gas supply, regulating the pressure and connecting the device to be tested. Highest quality components are integrated into a compact assembly to assure optimum molbloc/molbox performance.
Close
Fluke molstic-S Mounting System
The single channel molstic-S is designed to accommodate one molbloc-S element. The dual channel allows two molbloc-S elements to be simultaneously mounted, allowing use of two ranges without changing hardware during a test. In addition, the outlet of the two molbloc-S elements can be plumbed in parallel using the downstream tee assembly (P/N 401884) in order to obtain additional flow range capacity when using a two-channel molbox1+.
Close
Fluke MPG2-H Manually Operated Pressure Generator Controller for Hydraulic Pressure
Economic solution to manually generate and adjust pressure from atmosphere to as high as
200 MPa (30,000 psi)
• Generates large pressure changes quickly and adjusts pressure precisely at a setpoint
• Self-contained design with compact 26 cm x 44 cm (10.2 in. x 17.3 in.) footprint
• Includes two (2) test ports, with standard high pressure gland and collar fittings
• Ideal for working with high pressure
-5%
Close
Fluke Networks GLD3-DSX-8-ADD – 3 Year Gold Support for DSX-8000-ADD
Fluke Networks GLD3-DSX-8-ADD 3 Year Gold Support for the DSX-8000-ADD
- 3 Year Gold Support for the DSX-8000-ADD
- One calibration and factory refresh per year at no charge
- Receive a loaner unit during calibration to eliminate downtime
- 24/7 technical support will toll-free support number
- Covers damage to the tester
- Covers annual traceable calibration, software updates, performance check, refurbishment of worn copper ports and scratched fiber ports
- Covers replacement of damaged parts and accessories that shipped with the unit
- Includes Prepaid express freight with labels
