Showing 37–42 of 42 results

Show sidebar
-10%
Close

Fluke 87V-MAX True RMS Digital Multimeter with built-in thermometer

$1,012.00
Excluding GST 10%

Product Features:

  • IP 67 waterproof and dustproof protection, completely sealed for use in harsh environments
  • Tested to withstand 4 meter (13 feet) drop (with holster)
  • Measure up to 1000 V, up to 10 A (20 A for 30 seconds), AC and DC
  • True-RMS voltage and current for accurate measurements on non-linear signals
  • 10,000 μF capacitance range, frequency to 200 kHz
  • Extended AC voltage bandwidth- 15 Hz to 20 kHz
  • Low-pass filter for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
  • Built in thermometer conveniently allows users to take temperature readings without having to carry a separate instrument
  • Min/Max/Average recording, plus 150 μs Peak min-max to capture variations automatically
  • Resistance, continuity and diode test
  • Large display digits and 2 level bright white backlight with backlit keypad buttons
  • Hi resolution 20,000 count display mode
  • Relative mode to remove test lead resistance from low ohms measurements
  • Reversible holster for added protection when not in use
  • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
  • Long battery life (800 hours)
  • Safety rated CAT IV 600 V/CAT III 1000 V
  • Battery type: Three AA batteries

Applications

  • Industrial and facilities maintenance
  • Cement plants and electrical utilities
  • Food processing and chemical processing
  • Steel mills and foundries
  • Mining (MHSA approval pending)
  • Military, petrochemical
-10%
Close

Fluke 87V-MAX/E2 KIT Industrial Electrician Combo Kit

$1,227.00
Excluding GST 10%

What’s included with the Fluke 87V-MAX/E2 KIT

  • Multimeter
  • Test Leads
  • Alligator Clips
  • Test Probes
  • Meter Hanging Kit
  • Temperature Probe
  • Carrying Case
  • 9 V Battery (Installed) Removable holster with Test Lead Storage
  • 3 x AA Batteries (Installed)

Product Features:

  • IP 67 waterproof and dustproof protection, completely sealed for use in harsh environments
  • Tested to withstand 4 meter (13 feet) drop (with holster)
  • Measure up to 1000 V, up to 10 A (20 A for 30 seconds), AC and DC
  • True-RMS voltage and current for accurate measurements on non-linear signals
  • 10,000 μF capacitance range, frequency to 200 kHz
  • Extended AC voltage bandwidth- 15 Hz to 20 kHz
  • Low-pass filter for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
  • Built in thermometer conveniently allows users to take temperature readings without having to carry a separate instrument
  • Min/Max/Average recording, plus 150 μs Peak min-max to capture variations automatically
  • Resistance, continuity and diode test
  • Large display digits and 2 level bright white backlight with backlit keypad buttons
  • Hi resolution 20,000 count display mode
  • Relative mode to remove test lead resistance from low ohms measurements
  • Reversible holster for added protection when not in use
  • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
  • Long battery life (800 hours)
  • Safety rated CAT IV 600 V/CAT III 1000 V
  • Battery type: Three AA batteries
  • Kit includes soft carrying case, probes and magnetic hanging kit

Applications

  • Industrial and facilities maintenance
  • Cement plants and electrical utilities
  • Food processing and chemical processing
  • Steel mills and foundries
  • Mining (MHSA approval pending)
  • Military, petrochemical
-10%
Close

Fluke 87V/E2 Industrial Electrician Combo Kit

$1,169.00
Excluding GST 10%

What’s included with the Fluke 87V/E2

  • Multimeter
  • Insulated Test Leads
  • Alligator Clips
  • Test Probes
  • Meter Hanging Kit
  • Temperature Probe
  • Carrying Case
  • 9 V Battery
  • Lifetime Warranty

Features

  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
  • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
  • Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
  • True-rms ac voltage and current for accurate measurements on non linear signals
  • Selectable filter for accurate voltage and frequency measurements on motor drives
  • 0.05% DC accuracy
  • 6000 counts, 3-3/4 digits
  • 4-1/2 digit mode for precise measurements (20,000 counts)
  • Measure up to 1000 V AC and DC
  • Measure up to 10 A, 20 A for up to 30 seconds
  • Built in thermometer lets you carry one less tool (TC probe included)
  • Frequency to 200 kHz and % duty cycle
  • Resistance, continuity and diode test
  • 10,000 µF capacitance range for components and motor caps
  • Min/max-average recording with min/max alert to capture variations automatically
  • Peak capture to record transients as fast as 250 µs
  • Relative mode to remove test lead interference from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Touch Hold to capture stable readings avoiding noisy signals
  • Large display digits and two-level bright white backlight for increased visibility
  • Analog bargraph for fast changing or unstable signals
  • Input Alert provides audible warning against wrong use of input jacks
  • Improved selectable sleep mode for long battery life
  • Access door for fast battery changes without breaking the calibration seal
  • Classic design with new removable holster with built in test lead and probe storage
  • Unique function for accurate measurements of noisy pulse-width modulated AC voltage
  • Measures correctly at the ASD and at the motor terminals
  • Accurately measure the frequency (motor speed), frequency measurement not affected by the ASDs carrier frequency
  • Measure AC current with an optional current clamp accessory
  • Compare reading with the display on the ASD
  • Special shielding blocks high frequency, high-energy noise generated by large drive systems
-10%
Close

Fluke 87V/IMSK Industrial Multimeter Service KIT with the i400

$1,202.00
Excluding GST 10%

Features

  • Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
  • True-RMS AC voltage and current for measuring non-linear signals
  • Captures intermittents as short as 250 µS
  • Safety rated CAT III 1000 V, CAT IV 600 V
  • Built-in thermometer and temperature probe
  • Easy access door for fast battery changes without breaking the calibration seal
  • Removable holster with built in test lead and probe storage for convenience
  • Audible Input Alert warning against wrong use of input jacks
  • Provides peak capture and min/max/avg recording
  • 6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
  • Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
  • Includes an analog bargraph for fast changing or unstable signals
  • Presents a large digit display with bright, two-level backlight for easier reading in low light
  • Delivers 0.05% DC accuracy
  • Measures up to 1000 VAC and DC
  • 10,000 µF capacitance range for components and motor caps
  • Relative mode to remove test lead interference from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Touch hold to capture stable readings of noisy signals
  • Two-level backlit display

Applications

  • Motor drives
  • Plant automation
  • Power distribution
  • Electromechanical equipement
-10%
Close

Fluke 88-5/A KIT Deluxe Automotive Multimeter Combo Kit

$1,279.00
Excluding GST 10%

Features

  • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
  • Large digit display with bright, two-level backlight
  • 6000 counts, 3¾ digits
  • Measure up to 1000 V AC and DC
  • Measure up to 10, 20 A for up to 30 seconds
  • Frequency to 200 kHz and % duty cycle
  • Resistance, continuity
  • RPM measurements with inductive pickup
  • Millisecond pulse width measurements for fuel injectors
  • 10,000 µF capacitance range for components and motor caps
  • Min/max-average recording with min/max alert to capture variations automatically
  • Peak capture to record transients as fast as 250 µs
  • Relative mode to remove test lead interference from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Touch Hold to capture stable readings avoiding noisy signals
  • Large display digits and two-level bright white backlight for increased visibility
  • Analog bargraph for fast changing or unstable signals
  • Input Alert provides audible warning against wrong use of input jacks
  • Improved selectable sleep mode for long battery life
  • Access door for fast battery changes without opening up the case
  • “Classic” design with new removable holster with built in test lead and probe storage
  • 10 mΩ input impedance wont load circuits
  • 0.1% DC accuracy

Measures

  • Resistance, continuity and diode test
  • Millisecond pulse width measurements for fuel injectors
  • Frequency to 200 kHz and % duty cycle
  • Measure up to 1000 V AC and DC
  • Measure current up to 10, 20 A for up to 30 seconds
  • 4½ digits for precise measurements
  • RPM measurements with optional inductive pickup
  • Temperature measurements with optional temperature probe

Applications

  • Automotive
-10%
Close

Fluke Connect 3000FC Wireless Digital Multimeter

$570.00
Excluding GST 10%
  • Record measurements over time and monitor changes live on your phone.
  • Share the results using Fluke Cloud™ storage and ShareLive™ video call.
  • Provides True-RMS voltage and current measurements with 6000-count resolution
  • Share results with remote team members instantly with ShareLive™ video call
  • Includes continuity, resistance, diode test, capacitance, and frequency tests, plus MIN/MAX recording
  • Provides 0 09% basic accuracy
  • Works with a standard amp clamp or with a flexible iFlex clamp
  • Shows meter measurement and readings from up to three modules simultaneously
  • Allows mixing and matching modules to meet your specific measurement needs
  • Current, voltage and temperature modules are available separately or in Fluke Connect kits
  • Runs on three AA Alkaline batteries, providing 250 hours minimum battery life
  • Comes with three-year standard warranty