Close
Kyoritsu 1062 MEAN/RMS Switch Multimeter, 1000V
Features
- 0.02% basic DC accuracy
- Large display with 50,000 counts
- Dual display for double indication for AC and DC, V and Hz, etc
- True RMS Measurements AC and AC+DC
- Wide AC Frequency bandwidth from 10Hz to 100kHz
- True RMS or MEAN value detection mode can be selected
- Fast Peak Hold response time of 250µs
- Low-pass filter for motor drive measurements
Close
Kyoritsu 4118A LOOP/PFC/PSC Tester, 20/200/2000 Ω, 195 to 253 V/50 Hz
Features
- Custom microprocessor controlled for highest accuracy and reliability
- 3 LED’s for checking correct wiring status
- Direct reading of Prospective Short Circuit Current (PSC)
- Safe voltage measurement function
Close
Kyoritsu 4105A-H Ground Resistance Tester, Digital, 2000Ω
Features
- Ground resistance values can be read directly from the scale
- Capable of measuring ground voltage
- Lead wire connection to C and P terminals and proper auxiliary earth resistance can be checked
- Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance
- Designed to meet IEC61010-1 Cat. III 300V
- New shock resistant case material is also dust and drip proof
Close
Kyoritsu 3128 12kV 10kV High Voltage Insulation Tester
Features
- Microprocessor controlled high voltage insulation resistance tester with Diagnostic functions
- Suitable for analyzing the insulation characteristics of cables, transformers, motors, generators, high-pressure switches, insulators, wiring installations, etc
- 6 ranges: 500 V, 1000 V, 2500 V, 5000 V, 10000 V, 12000 V, 12kV
- Fine adjustment of voltage setting at each range is also possible
- Graphic representation of the insulation resistance and leakage current versus time on large display with bar graph and backlight
- Can be operated from built-in rechargeable battery or from AC line
- Automatic discharge after test with monitoring of the discharge voltage
- Internal memory can store about 43,000 data (max)
- Robust design for field use with IP64 rating (with lid closed)
Close
Kyoritsu KEW2117R AC Digital Clamp Meter, True RMS, 1kHz
Features
- Frequency response: 40Hz to 1kHz
- Full Safety Jaw
- Ergonomic over-molded body gives convenient one-handed operation
- Large easy-to-read display with 0.1 A resolution
- Accurate reading with True RMS 600/1000A auto-ranging
- Long battery life
- Safety Standard: IEC61010-1 CAT IV 300V / CAT III 600V
Close
Kyoritsu 8035 Non-Contact Safety Phase Indicator, 70 to 1000 V AC
Features
- Innovative technology permits safe, contact-free testing
- The insulated crocodile clips can clip insulated cables from Ø0.09 to 1.18″ (2.4 to 30 mm)
- Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones
- Can be fixed to a metal panel via the magnet on the back side
- Wide measuring range for three-phase installations from 70 to 1000 V AC
- Complies with IEC 61010-1 CAT 600 V and CAT 1000 V
Close
Kyoritsu 6315-04 Power Quality Analyzer
Features
- Helpful support functions: Quick start guide, wiring check and sensor detection for easy and reliable measurement
- Measurement with high accuracy: Guaranteed accuracy: ±0.3%rdg (energy), ±0.2%rdg (voltage/ current); Complies with the international standard IEC 61000-4-30 class S and the european standard EN50160
- Remote monitoring on PC and Android device: Remote checking of measurement in real-time is possible via Bluetooth communication; Recorded data can be saved in the supplied SD card; EN50160 report can be generated after survey by PC software
- Various clamp current sensors: Various types of clamp and flexible sensors are available from 1000 mA range up to 3000 A range and earth leakage measurements; Energy consumption check on site, trend and demand graphs for easy recognition, TFT color display with high resolution
- IEC 61010-1 CAT IV 300 V, CAT III 600 V, CAT II 1000 V
Close
Kyoritsu 2046R True RMS AC/DC Digital Clamp Meter, 600A/600V
Features
- 600V input protection
- Sleep function saves battery life
- NCV function detects the presence of voltage in an electrical circuit or equipment without touching them
- Temperature measurement with optional k-type temperature probe
- Continuity & diode check
- Capacity measurement
- Peak hold function for peak value measurements on inrush currents (only at AC A range)
Close
Kyoritsu 2056R True RMS AC/DC Digital Clamp Meter, 1000A/600V
Features
- 600V input protection
- Sleep function saves battery life
- NCV function detects the presence of voltage in an electrical circuit or equipment without touching them
- Temperature measurement with optional k-type temperature probe
- Continuity & diode check
- Capacity measurement
- Peak hold function for peak value measurements on inrush currents (only at AC A range)
- Data hold
- Comfortable double moulded main body
- LCD backlight
- 6039 count and bar graph display
- REL function to indicate measurement variation (current, voltage, resistance)
- Min/Max function
Close
Kyoritsu KEW6516BT Multi-Function Tester with Bluetooth
Features
- Color LCD 3.5″ dot matrix
- Anti-trip technology (with 2 and 3 wire) for no trip LOOP L-PE testing on all RCDs
- With 2 wires only, very useful in case of no neutral (i.e. three-phase motor lines)
- High test current range of 2 Ω with 0.001 Ω resolution
- Zs Limit compares the values required by electrical installations standard with measured results
- Type AC, A, F, B (General and Selective), EV and Variable RCDs
- Single and auto test, ramp test and contact voltage
- Earth resistance test 2 and 3 wires with all accessories included
Close
Kyoritsu 6010B Multifunction Electrical Tester
Features
- Continuity 20/200 Ω 200 mA Test Current
- Insulation 500/1000 V, 20/200 MΩ 1 mA Rated Test Current
- Loop Impedance 20/2000 Ω 15mA Test Current at 2000 Ω (No RCD Trip)
- RCD 10/30/100/300/500mA x1/2, x1, Fast Trip (40 ms), DC, Auto Ramp
- Uc (Contact Voltage) 100 V
- Designed to IEC 61010-1, IEC 61557
- Data Memory: 300 measured results
- Download Results to PC by Using 8212 Data Communication Adapter through Optical RS-232C Port
Close
Kyoritsu 2012RA Digital Multimeter
Features:
- Continuous measuring time
- Applicable standards IEC 61010-1 CAT III 300V, CAT II 600V Pollution degree 2; IEC 61010-031 IEC 61010-2-032 IEC 61326
- Continuity buzzer
