Close
Fluke LENS/25MAC2 Optional Thermal Imaging Lens, 25 µm Macro
Fluke LENS/25MAC2 Offers
Features
- Avoid the hassle of sending in your camera to calibrate with the lens – with smart lenses you can just attach the lens to any compatible camera and start taking images.
- With this lens, there’s no need to move the focus wheel the precise amount to get optimal focus. With your lens attached, use LaserSharp Auto Focus to set the focus, then position the camera and target within the working distance of the lens (~8 to ~14 mm).
- Made of 100% diamond-turned germanium with an engineered coating, the most efficient available material to transmit energy to the detector.
Applications
- R&D
- Electronics Design and Validation
- Circuit Boards
- Components
- Faulty Equipment Location
Close
Fluke LENS/4XTELE2 Optional Thermal Imaging Lens, 4x Telephoto
Optional 4X Telephoto Lens for the TI200/300/400 Thermal Imaging Cameras.
Close
Fluke Liquid Trap
- Working pressure range – 3000 psi (206 bar)
- Includes convenient drain valve and mounting stand
- Place between device under test and calibrator
- 1/4 inch NPT fittings
- Can be used with any calibrator including Fluke Calibration Series 7215 Controllers, Druck DPI 515 and others
-12%
Close
Fluke LVD1A Volt Light
- Built-in flashlight
- Detector glows blue when AC voltage is present
- Detector glows red when it is at the source
-10%
Close
Fluke LVD2 Volt Light, Non Contact Voltage Detector & LED flashlight
Features
- Dual sensitivity
- LED light with 100,000 hour life
- Dual levels of detection
- Blue indicates proximity to AC voltage source
- Red indicates you’re at the source
- Ultra-bright white LED
- 100,000 hr bulb
Close
Fluke MDA-510 Motor Drive Analyzer, 4 Channel, 500 MHz
Features
- Key measurements: inverter output voltage, DC bus voltage and ripple voltage, and unbalance
- Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
- Measure key motor-drive parameters including voltage, current, DC Bus voltage level and AC ripple, voltage and current unbalance, and voltage modulation
- Conduct guided measurements for motor-drive input, DC bus, and drive output with graphical step-by-step voltage and current connection diagrams
- Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
- Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
- Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
- Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
Applications
- Industrial automation
- HVAC/R
- Motor repair
- Discrete or process based industrial manufacturing
- Waste water treatment
- Oil and gas maintenance
What’s included with the Fluke M
Fluke MDA-550 Motor Drive Analyzer with Motor Shaft and Harmonics, 4 Channel, 500 MHz
Features
- Key measurements: inverter output voltage, DC bus voltage and ripple voltage, harmonics, unbalance
- Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
- Measure key motor-drive parameters including voltage, cur- rent, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics, voltage modulation, and motor shaft voltage discharges
- Perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system
- Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements with graphical step-by-step voltage and current connection diagrams
- Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
- Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
- Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
- Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
Close
Fluke MDA-550-III Motor Drive Analyzer, 4 channel, 500 MHz
Features
- Key measurements: inverter output voltage, DC bus voltage and ripple voltage, harmonics, unbalance
- Three powerful test tools in one: motor-drive analyzer, waveform analyzer and recording data logger all in one
- Measure key motor-drive parameters including voltage, cur- rent, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics, voltage modulation, and motor shaft voltage discharges
- Perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system
- Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements with graphical step-by-step voltage and current connection diagrams
- Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
- Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
- Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
- Highest safety rating – 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
Close
Fluke MET/CAL® Calibration Management Software
- Perform automated calibration on all kinds of test and measurement tools and equipment, including dc/lf, RF and microwave instruments.
- Create, edit, test, and document calibration procedures, quickly and easily.
- Configure and report a wider range of measurement uncertainty parameters and include verification data to provide an audit trail and support further analysis.
- Track asset information including work order history and status, traceability, users, customers, and location.
- Analyze and report asset information; produce customized printed certificates and reports.
- Make data available to other corporate systems.
- Import asset and calibration data into MET/TEAM software
- Help meet the requirements of quality standards like ISO 9000, ISO/IEC 17025, NRC 10 CFR, ANSI Z540.3, and others.
Close
Fluke MET/CAL® Warranted Calibration Procedures
MET/CAL® core calibration procedures
A number of example procedures are supplied free with MET/CAL®. You may download these calibration procedures from this website, use them ‘as is’ or as a template for developing your own custom procedures to fit your operation’s specific requirements and calibration workload.
Close
Fluke MET/TEAM® Test Equipment Asset Management Software
- Manage all aspects of your calibration operation with one paperless solution
- Improve productivity and reduce operating costs
- Maintain compliance with regulatory standards
- Configure and customize for your business rules
- Report to meet a wide range of requirements
- Schedule maintenance events
- Perform batch receiving
- Create, track and close work orders
- Track assets as they move through the lab
- Create and print calibration reports
- Maintain an audit trail
- Manage shipping information
- Track customer and vendor information
- View business statuses
- Create data templates and store procedures
- …and much more
Close
Fluke MFC Switchbox™ for molbox1+ and MFC-CB™
MFC Switchbox supplies power and switches between up to five MFC or MFMs on one molbox1+ or MFC-CB channel.
The MFC switchbox is an accessory to the molbox1+ MFC option and MFC-CB mass flow control box. This accessory continuously powers up to five MFCs and/or MFMs (DUTs) and allows switching control between them on one molbox1 or MFC-CB channel.
