Close
Fluke 700RG06 Pressure Test Gauge, -12 to 100 psi reference
Features
- Intrinsically safe (ATEX and IECEx compliant)
- Stainless steel probe and digital readout are fixed together and calibrated as a system
- Accuracy of ±0.05°C (±0.09°F) over full range
- Large backlit LCD display rotates 90° making it easy to read from any angle
- User-configurable temperature trend/stability indicator lets you know when your temperature is stable enough to record an accurate measurement
- Display temperature in °C or °F
- User-selectable resolution (0.1, 0.01, 0.001)
- Max/Min/Trend/Up key allows you to see the maximum or minimum temperature since the most recent power up
- Simple three-point calibration function allows you to easily and accurately calibrate the thermometer
- Requires a minimum immersion depth of only 7cm (2.8″), with no appreciable effect on the measured temperature due to heat loss through stem conduction
- Data logging to internal memory of up to 10,000 time-stamped measurements is optionally available
- 300-hour battery life
- Percent battery-life and low-battery indicator
- NVLAP-accredited, NIST-traceable calibration included
Close
Fluke 700RG05 Pressure Test Gauge, -14 to 30 psi reference
Features
- Accuracy to 0.04% of full scale
- Certified intrinsically safe as per CSA Class 1, Div 2, Groups A-D rating and ATEX II 3 G Ex nA IIB T6 rating
- 5-1/2 digit, 16.5mm (0.65″) high display with 20-segment bar graph 0-100% and backlight
- Displays measured pressure in 18 different engineering units ranging from psi to bar, kPa and many others, allowing you to customize the gauge to measure your individual or localized measurement needs and requirements
- Ability to easily connect to existing pumps
- Log over 8,000 pressure measurements when paired with 700G/TRACK software
- Combine with a pneumatic or hydraulic hand pump for a complete pressure measurement and testing kit
- Includes manual and CD ROM, 1/4″ NPT to 1/4″ ISO adapter, traceable certificate of calibration
Close
Fluke 700GA27 Pressure Test Gauge, 300 psia
Features
- Accuracy to 0.05% of full scale
- Certified intrinsically safe as per CSA Class 1, Div 2, Groups A-D rating and ATEX II 3 G Ex nA IIB T6 rating
- 5-1/2 digit, 16.5mm (0.65″) high display with 20-segment bar graph 0-100% and backlight
- Displays measured pressure in 18 different engineering units ranging from psi to bar, kPa and many others, allowing you to customize the gauge to measure your individual or localized measurement needs and requirements
- Ability to easily connect to existing pumps
- Log over 8,000 pressure measurements when paired with 700G/TRACK software
- Combine with a pneumatic or hydraulic hand pump for a complete pressure measurement and testing kit
- Includes manual and CD ROM, 1/4″ NPT to 1/4″ ISO adapter, traceable certificate of calibration
Close
Fluke 700GA6 Pressure Test Gauge, 100 psia
Features
- Accuracy to 0.05% of full scale
- Certified intrinsically safe as per CSA Class 1, Div 2, Groups A-D rating and ATEX II 3 G Ex nA IIB T6 rating
- 5-1/2 digit, 16.5mm (0.65″) high display with 20-segment bar graph 0-100% and backlight
- Displays measured pressure in 18 different engineering units ranging from psi to bar, kPa and many others, allowing you to customize the gauge to measure your individual or localized measurement needs and requirements
- Ability to easily connect to existing pumps
- Log over 8,000 pressure measurements when paired with 700G/TRACK software
- Combine with a pneumatic or hydraulic hand pump for a complete pressure measurement and testing kit
- Includes manual and CD ROM, 1/4″ NPT to 1/4″ ISO adapter, traceable certificate of calibration
Close
Fluke 700GA5 Pressure Test Gauge, 30 psia
Features
- Accuracy to 0.05% of full scale
- Certified intrinsically safe as per CSA Class 1, Div 2, Groups A-D rating and ATEX II 3 G Ex nA IIB T6 rating
- 5-1/2 digit, 16.5mm (0.65″) high display with 20-segment bar graph 0-100% and backlight
- Displays measured pressure in 18 different engineering units ranging from psi to bar, kPa and many others, allowing you to customize the gauge to measure your individual or localized measurement needs and requirements
- Ability to easily connect to existing pumps
- Log over 8,000 pressure measurements when paired with 700G/TRACK software
- Combine with a pneumatic or hydraulic hand pump for a complete pressure measurement and testing kit
- Includes manual and CD ROM, 1/4″ NPT to 1/4″ ISO adapter, traceable certificate of calibration
Close
Fluke 700PTP-1 Pneumatic Test Pump
Features
- Pump can be easily cleaned without disassembly
- The vernier can be used as a stand-alone low pressure calibration source
- Two pressure ports allowing simultaneous connection:
- ¼ – NPT female fitting for the reference gauge or pressure module
- ¼” NPT female fitting for the unit under test
- Adjustable stroke length can be set to limit the pressure per stroke
- 1st Pressure Port – 3/8-BSP (ISO228) female parallel thread fitting for the reference gauge or pressure module
- 2nd Pressure Port – 1/8-BSP (ISO228) female parallel thread fitting for the unit under test
Applications
- Pressure instrument calibration
- Pressure instrument Maintenance
- Petro-Chemical
- Oil and Gas
- Pharmaceutical
- Water and wastewater
- Food and Beverage
- Power Generation
Close
Fluke 700PMP Pressure Pump
The Fluke 700PMP Offers The Fluke 700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa.
Close
Fluke 700LTP Low-pressure Test Pump
Applications
- Pressure instrument calibration
- Pressure instrument Maintenance
- Petro-Chemical
- Oil and Gas
- Pharmaceutical
- Water and wastewater
- Food and Beverage
- Power Generation
Close
Fluke 700-IV Current Shunt
Fluke 700-IV Offers
The Fluke 700-IV Current Shunt is used with the 741 or 743 Documenting Process Calibrator to measure and source current simultaneously.
Specifications
- Input current range: 0 to 55 mA DC
- Conversion factor: 1 mA in converts to 10 mV out
- Accuracy (Note): ±0.025% of input
- Calibration interval: 1 year
- Input resistance: 250Ω Nominal
- Output resistance: 10Ω Nominal
- Maximum voltage input: 30V DC
Close
Fluke 700ILF In-Line Filter
Fluke 700ILF Offers
- The Fluke 700ILF In-line filter can be used to isolate the calibrator from incidental contact with fluids.
- Particularly useful with the 718 calibrator to help keep moisture or oils from contaminating the on-board pump.
Close
Fluke 700HTH-1 Hydraulic Test Hose
Features
- Hose and fittings connect directly to the Fluke 700HTP-1 test pressure port
- Includes plugs and caps to eliminate fluid loss in hose, eliminates the need to re-prime the hose
- Self-sealing fittings with easy finger tight connections
- Low volumetric expansion and a negligible pressure drop at rated pressures
Applications
- Petro-Chemical
- Oil and Gas
- Pharmaceutical
- Water and wastewater
- Food and Beverage
- Power Generation
Close
Fluke 700MTH Metric Transmitter Test Hose Kit
Fluke 700MTH Offers
Easy to use premium pressure transmitter test hose kit for connection to 1/4″ female metric/BSP.
Features
- 5,000 psi rating
- Includes 1/8″ NPT connection for permanent mount to a calibrator or test pump
- No tools required, male connector for connection to 1/4″ female metric/BSP
