Showing 193–204 of 2494 results

Show sidebar
Close

Fluke 123B Industrial ScopeMeter® Hand-Held Oscilloscope, 20 MHz

$2,935.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
Close

Fluke 123B/S Industrial ScopeMeter Hand-Held Oscilloscope with the Fluke Vie software, 20 MHz

$3,027.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz or 20 MHz oscilloscope bandwidth
  • Two 5000-count true-rms digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
Close

Fluke 124B ScopeMeter Oscilloscope

$3,420.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 or 40MHz bandwidth
    • 5mV to 200V/div sensitivity
  • VDC and true-rms VAC ranges from 500mV to 750V
    • 5000 count full scale reading
  • Up to 2200V peak (max, min, & peak-to-peak modes)
    • 5% FS accuracy (min or max), 10% (peak-to-peak)
    • 500 counts full scale reading
  • Up to 70MHz frequency for 124B & 125B
    • Up to 50MHz for 123B
  • Measure resistance, continuity, diode, & capacitance
  • CE & CSA approved, CAT IV 600V safety rated
Close

Fluke 124B/S Industrial ScopeMeter Hand-Held Oscilloscope with the Fluke View software, 40 MHz

$4,481.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
Close

Fluke 125B ScopeMeter Oscilloscope

$4,129.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 20 or 40MHz bandwidth
    • 5mV to 200V/div sensitivity
  • VDC and true-rms VAC ranges from 500mV to 750V
    • 5000 count full scale reading
  • Up to 2200V peak (max, min, & peak-to-peak modes)
    • 5% FS accuracy (min or max), 10% (peak-to-peak)
    • 500 counts full scale reading
  • Up to 70MHz frequency for 124B & 125B
    • Up to 50MHz for 123B
  • Measure resistance, continuity, diode, & capacitance
  • CE & CSA approved, CAT IV 600V safety rated
Close

Fluke 125B/S Industrial ScopeMeter Hand-Held Oscilloscope with FlukeView software, 40 MHz

$5,288.00
Excluding GST 10%

Features

  • Dual-input digital oscilloscope and multimeter
  • 40 MHz oscilloscope bandwidth
  • Two 5000-count True RMS digital multimeters
  • Connect-and-View™ trigger simplicity for hands-off operation
  • IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
  • Dual-input waveform and meter reading recorder for trending data over extended periods
  • Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Resistance, continuity, diode and capacitance meter measurements
  • Power measurements (W, VA, VAR, PF, DPF, Hz)
  • Voltage, current and power harmonics
  • Check Industrial networks with BusHealth physical layer tests against defined reference levels
  • Save or recall data and instrument setups
  • Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures
  • External optically isolated USB interface to transfer, archive and analyze scope or meter data
  • Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app
  • FlukeView® ScopeMeter® Software for Windows®
  • Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
  • Highest safety rating in the industry: safety rated for CAT IV 600 V
Close

Fluke 1502A, 1504 Tweener Thermometer Readouts

  • Two Tweeners to choose from—reading PRTs or thermistors
  • Best price/performance package
Close

Fluke 1503 Insulation Resistance Tester

$888.00
Excluding GST 10%

Key features

  • A rugged, compact insulation resistance tester for residential and commercial electricians
  • Performs insulation tests from 0.01 MΩ to 2000 MΩ
  • Offers two insulation test voltages: 500 V and 1000 V
  • Includes live circuit detection to prevent insulation test if voltage >30 V is detected
  • Measures resistance from 0.01 Ω to 20.00 kΩ
Close

Fluke 1507 Insulation Resistance Tester

$1,150.00
Excluding GST 10%

Key features

  • Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
  • Automatically calculates Polarization Index and Dielectric Absorption Ratio
  • Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
  • Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V
Placeholder
Close

Fluke 1523-CASE Carrying Case for Fluke Reference Thermometers

$830.00
Excluding GST 10%

What’s included with the Fluke 1523-CASE

  • Fluke 1523-CASE Carrying Case for Fluke Reference Thermometers
Placeholder
Close

Fluke 1523-P4-256 Single Channel Reference Thermometer Kit

$6,400.00
Excluding GST 10%

Features

  • Provides readings and graphs of recorded temperatures
  • Stores up to 25 temperature readings in the integrated memory
  • Large digital display clearly shows the results
Placeholder
Close

Fluke 1524-P4-256 Dual Channel Reference Thermometer Kit

$6,948.00
Excluding GST 10%

The kit provides reliable measurements and graphs of temperature readings. It records the measurements for later assessment.