Close
Fluke Amprobe DGC-1000A Clamp Ground Resistance Tester
- Accurate ground resistance measurement from 0.025 to 1500 Ohms
- True-rms current measurement including leakage current
- Accurate readings regardless of power quality in less than 10 seconds
- Continuity beep if the resistance is lower than 40.00 Ohms
- Simple and easy to use, no test leads or auxiliary electrodes necessary
- Data logging capability – 116 records
- Individual data point recording
- User selectable high low ohm audible alarms
- Auto power off (can be disabled)
- Low battery indicator
- Large LCD display
Close
Fluke Amprobe DC205C Deluxe Hard Shell Case
- Hard-shell case for storing and carrying compatible multimeters
- Hard exterior provides better protection against bumps and abrasions than a soft, pouch-style case
- Folding cover can be opened or closed to expose or conceal meter controls, and clasp closure keeps the cover closed during transport
- Shoulder strap frees hands during transport
- Measures 9.6 x 4.7 x 4.3 inches (H x W x D)
Close
Fluke Amprobe CT238A Clamp Accessory
-
Product Features:
- AC/DC current clamp, 20 A
- Special “low current version
- Zero adjust knob
- Attached leads and users manual
- 10mA to 20A Current Range
- 10 to 1 Division Ratio
- mV Output
- DC to 10kHz Frequency Range
Close
Fluke Amprobe CT235A Clamp Accessory
- AC/DC current clamp, 1000 A
- Zero adjust knob
Close
Fluke Amprobe CO2-100 Handheld Carbon Dioxide Meter
- Low drift portable meter for checking indoor air quality
- CO2 measurement up to 9999 ppm
- Triple display with simultaneous CO2, temperature and relative humidity readings
- Selectable display of dew point and wet bulb
- Air quality analysis with displays of:
- TWA display (time-weighted average) for 8 hrs period
- 15 minutes STEL (short-term exposure limit) value
- High performance low drift sensor designed with NDIR (non-dispersive infrared) waveguide technology
- Easy to read large LCD display
- Manually calibratable
- Audible alarm threshold setting to setup warning against carbon dioxide level
- Backlight function for working in dark area
- Optional PC download capabilities
- Data hold
- Maximum, minimum, average functions
- Long time drift compensation for accurate readings
Close
Fluke Amprobe CM100 Carbon Monoxide Meter with Adjustable CO Levels
-
Product Features:
- Adjustable CO warning level
- The CM100’s alarm is preset to 25ppm to warn about possible danger
- User can adjust the alarm level by choosing CO gas levels: 25, 30, 35, 45, 50, 70, 100 and 200ppm
- Dual digital display
- Backlight for viewing in dim areas
- Auto power off
- Self-test feature
Close
Fluke Amprobe BAT-500 Battery Impedance Tester up to 40 V
-
Product Features:
- Tests battery Impedance to calculate its true life
- Works with most batteries, compact storage batteries, alkaline and lead-acid up to 500Ah
- Resistance measurement up to 40 ohms, and voltage up to 40V
- Tests are performed without shutting down a battery
- Simultaneously measure battery resistance and voltage
- Comparator function to quickly access conditions as pass, warning, or fail
- 99 memory locations to store results with read function
- Compact and lightweight
- RS232 PC interface to download testing results to a PC for trending/life cycle analysis
- Instruction manual, batteries, test probe, software, RS232 cable
Close
Fluke Amprobe BAT-200 Battery Tester
-
Product Features:
- Easy-to-read color-coded display with “good,”low and “replace/recharge indicators
- Works with standard and rechargeable batteries
- Compatible with: 9V, AA, AAA, C, D, 1.5V button type
- Compact design
- Ergonomic battery holder
- Users manual included
Close
Amprobe CT-400 Signal Clamp
-
Product Features:
- Used to induce a signal into wires without access to bare conductors
- For use with wire tracers and kits
- Operating voltage: 0 to 1000 V AC
- Operating frequency: Wire tracing: 32.768 kHz / AC current measurement: 45 Hz to 400 Hz
- Use the CT-400 Signal Clamp with the AT-6000-T to induce signal into wires when there is no access to bare conductors
- CAT IV 600 V, CAT III 1000 V
Close
Amprobe AT-8020 Advanced Industrial Wire Tracer Kit
-
Product Features:
- Trace energized and de-energized wires in walls, ceilings, floors and tight spaces
- Identify breakers and fuses
- Pinpoints shorts and opens
- Non-contact voltage mode and passive tracing
- High resolution 3.5 in (89 mm)
- TFT LCD color display
- Three power modes
- “High” power mode for normal circuits
- “Low” power mode for precision tracing in difficult areas
- “Loop” power mode provides a boosted signal using the signal clamp
- Two automatically selected frequency modes for optimal tracing on energized and de-energized circuits
- Embedded help screens for easy, error free set-up
Close
Amprobe AT-6020 Advanced Wire Tracer Kit
-
Product Features:
- Traces wires in walls, ceilings, floors and corners
- Locates breakers and fuses
- Pinpoints shorts and opens
- High resolution 2.5″ TFT LCD color display
- Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits
- Comes with custom Amprobe hard carrying case, test leads, and accessories
- Compatible with optional Signal Clamp (CT-400) clamp-on attachment and TIC 410A Hot Stick attachment to extend your reach
Three Transmitter signal modes:
- “High Signal” mode for normal circuits
- “Low Signal” mode for precision tracing in difficult areas
- “Loop” mode for closed loop de-energized circuits
Four Receiver tracing modes:
- “Quick Scan” mode allows for quick wire detection at a longer distance
- “Precision” mode precisely pinpoints wires or faults located behind walls, floors, or ceilings
- “Breaker Identification” mode facilitates quick and easy breaker locating
- “Non-Contact Voltage Detection” mode utilizes passive tracing without the Transmitter to verify if a wire is energized
Close
Amprobe AT-6010 Advanced Wire Tracer Kit
-
Amprobe AT-6010 Offers
With the AT-6010 advanced wire tracer kit, it is easier and safer to locate energized and de-energized wires, breakers and fuses. When the transmitter is connected to the circuit, the receiver easily detects the signal in the wires or cables behind walls, ceilings and floors. The transmitter works on energized and de-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments, allowing for work directly on an energized circuit without the need to take equipment offline. The transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage.
Features
- Receiver:
- Tip sensor – to trace wires in tight spaces
- Large black and white LCD screen
- Energized/De-energized indicator
- Signal strength bar graph
- Sensitivity adjustment
- Transmitter:
- Compatible with standard test leads
- Voltage warning indicator
- HI mode for general wire tracing
- Loop mode for finding shorts
- Simple one button operation
- Large LCD Receiver screen with two digit readout, bar graph and sound to easily determine wire location
- Compatible with the CT-400 Signal Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
Applications
- Trace energized and de-energized wires
- Identify breakers and fuses
- Connect to GFCI protected circuits
- Find breaks and opens
- Find shorts
- Trace wires in metal conduit
- Trace non-metallic pipes and conduit
- Trace shielded wires
- Trace underground wires
- Trace low voltage wires and data cables
- Sort bundled wires
- Map a circuit with test leads
- Trace breakers on system with light dimmers
- Receiver:
