Close
Amprobe AT-3500 Underground Cable Locator
- Locates underground energized and de-energized wires, cables and pipes
- Three testing modes for best accuracy
- Passive power (50/60 Hz)
- Passive radio (RF)
- Active T-3500 signal generator with induction mode directly connected to the cable with test leads or optional clamp
- Active mode depth measurement up to 16’ (4.9 m)
- Semi-automatic gain control – fast signal location and control
- 33 kHz active frequency – best frequency for general locating
- Precise pinpointing of buried services and exceptionally fast sound and meter response with backlight multiple-segment bar-graph digital display and audible indicators
Close
Fluke Amprobe AMP-330 1000A AC/DC TRMS Motor Maintenance Clamp Meter
- Measures AC/DC Current to 1000 A and AC/DC Voltage to 1000 V
- Measures temperature from -40° to 752°F, (-40° to 400°C)
- Measures DC Microamps output to test proper operation of the flame sensor on gas appliances
- Measures capacitance, test diodes, and features a continuity beeper
- Tests 3-phase sequence and motor rotation to ensure proper connection of a motor to a 3-phase system
- Monitors inrush current during motor start-up
- Features True-RMS sensing for accurate voltage measurements in noisy electrical environments
- Amp-Tip function delivers precise low AC current measurements – 0 to 60 A
- Includes a low pass filter to accurately measure voltage and current on variable frequency drives
- Provides resistance and continuity measurement capabilities to verify the quality of electrical connections and the proper operation of motor and transformer coils
- Provides data hold, relative zero, and MAX/MIN/AVG mode for quick analysis
- Maximizes battery life with auto power off and low battery indicator
- Backlit display for easy measurement viewing in bright and dim environments
- CAT IV 600 V, CAT III 1000 V safety rated
- Boasts peak hold and work light
- Accommodates conductors up to 2.0 inches (51 mm)
Close
Fluke Amprobe AMP-320 600A AC/DC TRMS Motor Maintenance Clamp Meter
- Measures AC/DC Current to 600 A and AC/DC Voltage to 600 V
- Measures temperature from -40 °F to 752 °F, (-40 °C to 400 °C)
- Measures DC Microamps output to test proper operation of the flame sensor on gas appliances
- Measures capacitance, test diodes, and features a continuity beeper
- Tests 3-phase sequence and motor rotation to ensure proper connection of a motor to a 3-phase system
- Monitors inrush current during motor start-up
- Features True-RMS sensing for accurate voltage measurements in noisy electrical environments
- Amp-Tip function delivers precise low AC current measurements – 0 to 60 A
- Includes a low pass filter to accurately measure voltage and current on variable frequency drives
- Provides resistance and continuity measurement capabilities to verify the quality of electrical connections and the proper operation of motor and transformer coils
- Provides data hold, relative zero, and MAX/MIN/AVG mode for quick analysis
- Maximizes battery life with auto power off and low battery indicator
- Backlit display for easy measurement viewing in bright and dim environments
- CAT III 600 V safety rated
- Accommodates conductors up to 1.37 inches (35 mm)
Close
Fluke Amprobe AMP-25 Mini-Clamp
-
Amprobe AMP-25 Offers
Features
- True-RMS for noisy environments provides accuracy and dependability
- AC/DC current to 300 A (10 mA resolution)
- Low pass filter for variable frequency drives
- Inrush current for motor start-up monitoring
- Non-contact voltage detection (NCV)
- Jaw opening to 1 in (25 mm)
- Auto-ranging
- DCA zero and data hold
- Auto power off
- Large LCD backlit display
- Safety Rated CAT III 600 V
Applications
- Facilities maintenance
- Engineers and technicians
- Electricians
- Light industrial users
- General purpose electrical maintenance
- Troubleshooting
- Motor start-up monitoring
Close
Fluke Amprobe AMP-220 600A AC/DC TRMS Clamp Meter
- Measures AC/DC Current to 600 A and AC/DC Voltage to 600 V
- Features True-RMS sensing for accurate voltage measurements in noisy electrical environments
- Amp-Tip delivers precise low AC current measurements – 0 to 60 A
- Includes a low pass filter to accurately measure voltage and current on variable frequency drives
- Capacitance measurement, continuity beeper and diode test
- Provides resistance and continuity measurement capabilities to verify the quality of electrical connections and the proper operation of motor and transformer coils
- Offers data hold and relative zero for quick analysis
- Maximizes battery life with auto power off and low battery indicator
- Backlit display for easy measurement viewing in bright and dim environments
- Accommodates conductors up to 1.37 in (35 mm)
- CAT III 600 V safety rated
Close
Fluke Amprobe AMB-50-KIT1 Test Lead Set
- Test Lead Set
- Colors:Â Black, Green, Red
- For AMB-50
Close
Amprobe AMB-45 Insulation Resistance Tester
- Features
- Tests insulation of wires, cables, transformers and electrical motors
- Comes as a complete kit including test leads and PC software
- Selectable test voltages 250V, 500V and 1000V
- Programmable timer to perform the Dielectric Absorption Ratio Test
- Sensitive Ohmmeter for checking resistance of motor windings
- Built in voltmeter
- Fast and easy to use, rugged durable design
- Internal memory to store measurements for future reference
- Data download to PC
Close
Fluke Amprobe AMB-25 Digital Insulation Resistance Tester
- Tests insulation of wires, cables, transformers and electrical motors
- Selectable test voltages 250 V, 500 V and 1000 V
- Programmable timer to perform the dielectric absorption ratio test
- Sensitive ohmmeter for checking resistance of motor windings
Close
Fluke Amprobe AM-570 Industrial Multimeter
-
Product Features:
- True-rms technology improves accuracy in electrically noisy environments
- Measures AC/DC Voltage up to 1000V, AC/DC current, resistance, frequency, capacitance, temperature, and duty cycle
- Low Z mode detects stray voltages
- Low pass filter accurately measures voltage on variable frequency drives
- Peak hold (crest) captures and holds the peak value of a voltage or current surge
- Non-contact voltage detection enhances safety
- Audible continuity quickly identifies shorts and opens
- Diode test to verify diode polarity
- Data hold freezes the reading on the display for further analysis
- MIN/MAX recording records min/max measurements over time to show voltage fluctuations
- Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range
- Warning alerts against improper test leads connection
- Combines user friendly features such as, auto power-off to conserve battery life, low battery warning, a “third hand test probe holder, built-in test leads storage, a built-in flashlight, and a Velcro strap to hang the meter
- Auto and manual-ranging delivers maximum flexibility
- Dual reading backlit LCD display with analog bar graph makes it easy to view results
- CAT IV 600V/CAT III 1000V safety rated for high voltage environments
Close
Amprobe AM-560 Advanced HVAC Multimeter
-
Product Features:
- Measures AC/DC voltage up to 1000V, AC/DC current, resistance, frequency, capacitance, temperature, and duty cycle
- Dual thermocouple takes simultaneous temperature readings on low and high side of an HVAC system
- Low pass filter accurately measures voltage on variable frequency drives
- Non-contact voltage detection enhances safety
- Audible continuity quickly identifies shorts and opens
- Diode test to verify diode polarity
- Data hold freezes the reading on the display for further analysis
- Peak hold (crest) captures and holds the peak value of a voltage or current surge
- MIN/MAX recording records min/max measurements over time to show voltage fluctuations
- Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range
- CAT IV 600V/CAT III 1000V safety rated for high voltage environments
Close
Fluke Amprobe AM-530 True-rms Electrical Contractor Multimeter
-
Product Features:
AM-530 Features:
- True-RMS technology improves accuracy in electrically noisy environments
- Measures AC/DC voltage up to 600V, AC/DC current, resistance, frequency, capacitance, and temperature
- Non-contact voltage detection enhances safety
- Audible continuity quickly identifies shorts and opens
- Diode test to verify diode polarity
- Data hold freezes the reading on the display for further analysis
- MIN/MAX recording records min/max measurements over time to show voltage fluctuations
- Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range
- Combines user friendly features such as, auto power-off to conserve battery life, low battery warning, a third hand test probe holder, built-in test leads storage, a built-in flashlight, and a Velcro strap to hang the meter
- Auto and manual-ranging delivers maximum flexibility
- Backlit LCD display with analog bar graph makes it easy to view results
- CAT III 600V safety rated
NCV-1030 Features:
- Detects the presence of AC voltage in cables, circuit breakers, wall sockets, junction boxes, fuses, extension cords and more
- NCV Sensitive range: 12V to 50VAC
- Voltage Detection Range: 50 to 1000VAC
- Tests voltage through wire insulation
- Identifies cable breaks in wires, cords and lightning systems connected in series
- Identifies polarity (line vs. neutral) of receptacles and cables
- Safely tests voltage in non-contact way
- Safety CAT IV 1000 V rated for wide range of applications
- IP65 rated (water and dust resistant) for indoor and outdoor use
Close
Fluke Amprobe AM-520 HVAC Multimeter
-
Amprobe AM-520 HVAC/R Multimeter Offers
Measure a broad range of electrical parameters with this HVAC/R multimeter. The backlit LCD display makes it easy to read, and it’s easy to use with non-contact voltage detection, the “third hand” probe holder, and the built-in flashlight. It offers all the most commonly used HVAC/R digital multimeter features such as temperature, micro amps to troubleshoot flame sensors, and capacitance to check motor startup capacitors.
Features
- Measurements: voltage up to 750Vac and 1000Vdc, ac/dc current, resistance, frequency, capacitance, temperature
- VolTectâ„¢ Non-contact voltage detection
- Built-in test leads storage and “third hand holder”
- Audible continuity
- Diode test
- Data hold
- Max/min memory
- Relative zero mode
- Built-in flashlight
- Auto and manual ranging
- Auto power off and low battery warning
- Backlit LCD display with analog bar graph
- Velcro strap to hang a meter
- Safety rated CAT III 600V, CAT II 1000V
Applications
- HVAC/R
- Troubleshoot Flame Sensors
- Check Motor Startup Capacitors
