Close
Amprobe CT-400 Signal Clamp
-
Product Features:
- Used to induce a signal into wires without access to bare conductors
- For use with wire tracers and kits
- Operating voltage: 0 to 1000 V AC
- Operating frequency: Wire tracing: 32.768 kHz / AC current measurement: 45 Hz to 400 Hz
- Use the CT-400 Signal Clamp with the AT-6000-T to induce signal into wires when there is no access to bare conductors
- CAT IV 600 V, CAT III 1000 V
Close
Amprobe AT-8020 Advanced Industrial Wire Tracer Kit
-
Product Features:
- Trace energized and de-energized wires in walls, ceilings, floors and tight spaces
- Identify breakers and fuses
- Pinpoints shorts and opens
- Non-contact voltage mode and passive tracing
- High resolution 3.5 in (89 mm)
- TFT LCD color display
- Three power modes
- “High” power mode for normal circuits
- “Low” power mode for precision tracing in difficult areas
- “Loop” power mode provides a boosted signal using the signal clamp
- Two automatically selected frequency modes for optimal tracing on energized and de-energized circuits
- Embedded help screens for easy, error free set-up
Close
Amprobe AT-6020 Advanced Wire Tracer Kit
-
Product Features:
- Traces wires in walls, ceilings, floors and corners
- Locates breakers and fuses
- Pinpoints shorts and opens
- High resolution 2.5″ TFT LCD color display
- Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits
- Comes with custom Amprobe hard carrying case, test leads, and accessories
- Compatible with optional Signal Clamp (CT-400) clamp-on attachment and TIC 410A Hot Stick attachment to extend your reach
Three Transmitter signal modes:
- “High Signal” mode for normal circuits
- “Low Signal” mode for precision tracing in difficult areas
- “Loop” mode for closed loop de-energized circuits
Four Receiver tracing modes:
- “Quick Scan” mode allows for quick wire detection at a longer distance
- “Precision” mode precisely pinpoints wires or faults located behind walls, floors, or ceilings
- “Breaker Identification” mode facilitates quick and easy breaker locating
- “Non-Contact Voltage Detection” mode utilizes passive tracing without the Transmitter to verify if a wire is energized
Close
Amprobe AT-6010 Advanced Wire Tracer Kit
-
Amprobe AT-6010 Offers
With the AT-6010 advanced wire tracer kit, it is easier and safer to locate energized and de-energized wires, breakers and fuses. When the transmitter is connected to the circuit, the receiver easily detects the signal in the wires or cables behind walls, ceilings and floors. The transmitter works on energized and de-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments, allowing for work directly on an energized circuit without the need to take equipment offline. The transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage.
Features
- Receiver:
- Tip sensor – to trace wires in tight spaces
- Large black and white LCD screen
- Energized/De-energized indicator
- Signal strength bar graph
- Sensitivity adjustment
- Transmitter:
- Compatible with standard test leads
- Voltage warning indicator
- HI mode for general wire tracing
- Loop mode for finding shorts
- Simple one button operation
- Large LCD Receiver screen with two digit readout, bar graph and sound to easily determine wire location
- Compatible with the CT-400 Signal Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
Applications
- Trace energized and de-energized wires
- Identify breakers and fuses
- Connect to GFCI protected circuits
- Find breaks and opens
- Find shorts
- Trace wires in metal conduit
- Trace non-metallic pipes and conduit
- Trace shielded wires
- Trace underground wires
- Trace low voltage wires and data cables
- Sort bundled wires
- Map a circuit with test leads
- Trace breakers on system with light dimmers
- Receiver:
Close
Amprobe AT-3500 Underground Cable Locator
- Locates underground energized and de-energized wires, cables and pipes
- Three testing modes for best accuracy
- Passive power (50/60 Hz)
- Passive radio (RF)
- Active T-3500 signal generator with induction mode directly connected to the cable with test leads or optional clamp
- Active mode depth measurement up to 16’ (4.9 m)
- Semi-automatic gain control – fast signal location and control
- 33 kHz active frequency – best frequency for general locating
- Precise pinpointing of buried services and exceptionally fast sound and meter response with backlight multiple-segment bar-graph digital display and audible indicators
Close
Fluke Amprobe AMP-330 1000A AC/DC TRMS Motor Maintenance Clamp Meter
- Measures AC/DC Current to 1000 A and AC/DC Voltage to 1000 V
- Measures temperature from -40° to 752°F, (-40° to 400°C)
- Measures DC Microamps output to test proper operation of the flame sensor on gas appliances
- Measures capacitance, test diodes, and features a continuity beeper
- Tests 3-phase sequence and motor rotation to ensure proper connection of a motor to a 3-phase system
- Monitors inrush current during motor start-up
- Features True-RMS sensing for accurate voltage measurements in noisy electrical environments
- Amp-Tip function delivers precise low AC current measurements – 0 to 60 A
- Includes a low pass filter to accurately measure voltage and current on variable frequency drives
- Provides resistance and continuity measurement capabilities to verify the quality of electrical connections and the proper operation of motor and transformer coils
- Provides data hold, relative zero, and MAX/MIN/AVG mode for quick analysis
- Maximizes battery life with auto power off and low battery indicator
- Backlit display for easy measurement viewing in bright and dim environments
- CAT IV 600 V, CAT III 1000 V safety rated
- Boasts peak hold and work light
- Accommodates conductors up to 2.0 inches (51 mm)
Close
Fluke Amprobe AMP-320 600A AC/DC TRMS Motor Maintenance Clamp Meter
- Measures AC/DC Current to 600 A and AC/DC Voltage to 600 V
- Measures temperature from -40 °F to 752 °F, (-40 °C to 400 °C)
- Measures DC Microamps output to test proper operation of the flame sensor on gas appliances
- Measures capacitance, test diodes, and features a continuity beeper
- Tests 3-phase sequence and motor rotation to ensure proper connection of a motor to a 3-phase system
- Monitors inrush current during motor start-up
- Features True-RMS sensing for accurate voltage measurements in noisy electrical environments
- Amp-Tip function delivers precise low AC current measurements – 0 to 60 A
- Includes a low pass filter to accurately measure voltage and current on variable frequency drives
- Provides resistance and continuity measurement capabilities to verify the quality of electrical connections and the proper operation of motor and transformer coils
- Provides data hold, relative zero, and MAX/MIN/AVG mode for quick analysis
- Maximizes battery life with auto power off and low battery indicator
- Backlit display for easy measurement viewing in bright and dim environments
- CAT III 600 V safety rated
- Accommodates conductors up to 1.37 inches (35 mm)
Close
Fluke Amprobe AMP-25 Mini-Clamp
-
Amprobe AMP-25 Offers
Features
- True-RMS for noisy environments provides accuracy and dependability
- AC/DC current to 300 A (10 mA resolution)
- Low pass filter for variable frequency drives
- Inrush current for motor start-up monitoring
- Non-contact voltage detection (NCV)
- Jaw opening to 1 in (25 mm)
- Auto-ranging
- DCA zero and data hold
- Auto power off
- Large LCD backlit display
- Safety Rated CAT III 600 V
Applications
- Facilities maintenance
- Engineers and technicians
- Electricians
- Light industrial users
- General purpose electrical maintenance
- Troubleshooting
- Motor start-up monitoring
Close
Fluke Amprobe AMP-220 600A AC/DC TRMS Clamp Meter
- Measures AC/DC Current to 600 A and AC/DC Voltage to 600 V
- Features True-RMS sensing for accurate voltage measurements in noisy electrical environments
- Amp-Tip delivers precise low AC current measurements – 0 to 60 A
- Includes a low pass filter to accurately measure voltage and current on variable frequency drives
- Capacitance measurement, continuity beeper and diode test
- Provides resistance and continuity measurement capabilities to verify the quality of electrical connections and the proper operation of motor and transformer coils
- Offers data hold and relative zero for quick analysis
- Maximizes battery life with auto power off and low battery indicator
- Backlit display for easy measurement viewing in bright and dim environments
- Accommodates conductors up to 1.37 in (35 mm)
- CAT III 600 V safety rated
Close
Fluke Amprobe AMB-50-KIT1 Test Lead Set
- Test Lead Set
- Colors: Black, Green, Red
- For AMB-50
Close
Amprobe AMB-45 Insulation Resistance Tester
- Features
- Tests insulation of wires, cables, transformers and electrical motors
- Comes as a complete kit including test leads and PC software
- Selectable test voltages 250V, 500V and 1000V
- Programmable timer to perform the Dielectric Absorption Ratio Test
- Sensitive Ohmmeter for checking resistance of motor windings
- Built in voltmeter
- Fast and easy to use, rugged durable design
- Internal memory to store measurements for future reference
- Data download to PC
Close
Fluke Amprobe AMB-25 Digital Insulation Resistance Tester
- Tests insulation of wires, cables, transformers and electrical motors
- Selectable test voltages 250 V, 500 V and 1000 V
- Programmable timer to perform the dielectric absorption ratio test
- Sensitive ohmmeter for checking resistance of motor windings
