Close
Fluke 5502A Multi-Product Calibrator
Key Features :
- Calibrates a wide variety of electrical test equipment
- Robust protection circuits prevent costly damage from operator error
- Ergonomically designed carrying handles make the 5502A easy to transport
- Rugged carrying case with built-in handles and wheels and removable front/rear access doors for in-situ calibration in almost any environment
- Current output that extends to 120 A when paired with the 52120A Transconductance Amplifier
- Remarkably affordable
Close
Fluke VisiFault Visual Fault Locator
- Locates visual faults including tight bends, breaks and bad connectors
- Accelerates end-to-end fiber checks
- Easily verifies polarity and identifies fibers
- Features continuous and flashing modes
- Ergonomic case survives drops, impacts and vibrations
Close
DESMO LT240A15 – CAT IV Single Phase Loadtester
Features & Benefits
- Voltage: 240 – 250V max. 1Ø
- Load: 1100W – 4.5amp.
- Internal Fusing: 7amp.
- Safety Rating: Cat IV 600V – Cat III 1000V.
- Compliant to: AS: 61010.1: 2003.
- Weight: 420gm.
- Leads: Silicon with internal white wear indicator layer.
- Test Probes: Cat III 1000V.
- Motor: 1100W with thermal cut-out.
- Grills: Black Nylon 15% Glass Filled.
- Cable Grommet: TPE 90A Shore.
- Body: PC-ABS Fire Retardant – spark finish.
- Hook: Polished 316 S/S that allows hands free operation.
- Product Code: LT240A15
Close
Fluke 1551A-12 Intrinsically Safe Stik Thermometer, 12″
Features
- Intrinsically-safe, battery operated, portable reference thermometer
- Provides accuracy of ±0.09°F (±0.05°C) over full range
- Features intrinsically-safe operation (ATEX and IECEx compliant)
- Measures -58 to 320°F (-50 to 160°C)
- Provides user-configurable temperature with Trend/Stability indicator
- Displays temperature in °C or °F
- Delivers 300-hour battery life
- Shows percent battery-life and low-battery indicators
Close
Fluke 6109A – Portable Calibration Bath, 35°C to 250°C
Features
- Four times more calibration throughput with twice the accuracy of Micro-Baths and dry-block calibrators
- Calibrate up to four tri-clamp sanitary sensors at a time instead of just one
- Increase calibration efficiency and reduce production downtime.
- Excellent display accuracy of ±0.1°C provides 4:1 test uncertainty ratio (TUR) for critical applications
- Easy to transport up-stairs and across catwalks
- Clean room compatible. Stainless steel casing withstands sterilizing chemicals and is rust proof
Close
Fluke 6102 – Liquid Bath Calibrator, 35 to 200°C
Fluke 6102-256Liquid Bath Calibrator, 35 to 200°C Offers
Features
- World’s smallest portable calibration baths can be transported with the fluid in them
- Stable to ±0.03°C or better, depending on the fluid you use
- Uniformity is ±0.02°C or better for low uncertainties using a reference thermometer
- Display accuracy has been improved to ±0.25°C for quick calibrations without a reference thermometer
- With a 48mm (1.9″) diameter, 140mm (5.5″) deep tank, user can calibrate any type of sensor including short, square, or odd-shaped sensors
Close
Fluke 9009 – Dual Range Dry-Block Calibrator, Black
Fluke 9009 Dual Range Dry-Block Calibrator Offers
Features
- Two independently controlled temperature blocks, one for heating and one for cooling with a combined range of -15 to 350°C
- Unique dual unit allows you to calibrate your sensor in the heated well while the cool well stabilizes; this eliminates the need to wait for multiple temperature points during calibration
- Hot block provides temperatures from 50 to 350°C (122 to 662°F), while the cold block covers the range of -15 to 110°C (5 to 230°F)
- Each block is controlled by a precision Hart Scientific temperature controller
- Cold block is calibrated to within ±0.2°C with stability of ±0.05°C
- Hot block’s display is accurate to ±0.6°C with stability of ±0.05°C
- NIST-traceable calibration is included for each of the two test blocks
- Each temperature block includes two wells with removable inserts; calibrate four probes at once, or calibrate two probes at the same time with an external reference, or use the two temperature wells to get quick “zero” and “span” references for transmitter calibrations
Close
Fluke 9103 – Low Temperature Field Drywell
Fluke 9103 Offers
Features
- Lightweight and very portable
- Accuracy to ±0.25°C
- Easy to recalibrate
Close
Fluke 9102S-256 Low Temperature Dry Block Calibrator
Features
- For work in the temperature range of -10 to 122°C
- Stable to ±0.05°C
- Includes a NIST-traceable calibration
- Excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient
- Two wells so you can use one for a reference thermometer to increase accuracy.
- Both wells are 1/2″ in diameter, and each has inserts available for almost any sensor size
- Battery pack option that gives you approximately four hours of field use when AC power is unavailable
- Removable insert sleeves 1/2″ O.D. x 4″ deep (13 mm x 102mm) and comes complete with 1/4″ and 3/16″ inserts (order additional insert sizes as needed)
Close
Fluke 9100S – Dry Block Calibrator
Features
- Compact design
- Ranges from 95 to 707°F (35 to 375°C)
- Accuracy to ±0.25°C, stability of ±0.25°C at 122°F (50°C)
- RS-232 interface with 9930 Interface-it v3.81 software (Optional )
Close
Fluke 9144 – High Temperature Field Drywell
Key features
- Lightweight, portable, and fast
- Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current
- True reference thermometry with accuracy to ±0.01 °C
- On-board automation and documentation
- Metrology performance in accuracy, stability, uniformity, and loading
Close
Fluke 9143 – Mid Temperature Field Drywell
Key features
- Lightweight, portable, and fast
- Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current
- True reference thermometry with accuracy to ±0.01 °C
- On-board automation and documentation
- Metrology performance in accuracy, stability, uniformity, and loading
