Siglent SDS814X HD – 100MHz 4 Channel Digital Storage Oscilloscope
Key Features
- 12-bit High Resolution
- 12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s
- Front ends with 70 μVrms noise floor @ 200 MHz bandwidth
- 2/4 analog channels, up to 200 MHz bandwidth
- SPO technology
- Waveform capture rate up to 120,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
- Supports 256-level intensity grading and color temperature display modes
- Up to 100 Mpts record length
- Digital trigger system
- Intelligent trigger: Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video (HDTV supported) , Qualified, Nth edge, Delay, Setup/Hold time.
- Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN
- Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
Siglent SDS822X HD – 200MHz 2 Channel Digital Storage Oscilloscope
Key Features
- 12-bit High Resolution
- 12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s
- Front ends with 70 μVrms noise floor @ 200 MHz bandwidth
- 2/4 analog channels, up to 200 MHz bandwidth
- SPO technology
- Waveform capture rate up to 120,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
- Supports 256-level intensity grading and color temperature display modes
- Up to 100 Mpts record length
- Digital trigger system
- Intelligent trigger: Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video (HDTV supported) , Qualified, Nth edge, Delay, Setup/Hold time.
- Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN
- Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
Siglent SDS824X HD – 200MHz 4 Channel Digital Storage Oscilloscope
Key Features
- 12-bit High Resolution
- 12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s
- Front ends with 70 μVrms noise floor @ 200 MHz bandwidth
- 2/4 analog channels, up to 200 MHz bandwidth
- SPO technology
- Waveform capture rate up to 120,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
- Supports 256-level intensity grading and color temperature display modes
- Up to 100 Mpts record length
- Digital trigger system
- Intelligent trigger: Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video (HDTV supported) , Qualified, Nth edge, Delay, Setup/Hold time.
- Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN
- Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
Siglent SPD4323X – Programmable Linear DC Power Supply
Key Features
- Rated voltage: 32V, 12V, 30V; rated output power: 240W, 285W, 400W
- Up to four high-precision power supplies with independent controllable outputs, supporting CH2 and CH3 series and parallel connections
- Clear graphical interface with waveform and timer display modes
- 5-digit voltage and current display with minimum resolution of 1mV, 1mA
- Fast output response time: < 50us
- The high current channel support remote voltage compensation sense function. The maximum compensation voltage is 0.6V
- Overvoltage protection and overcurrent protection or safe and accurate operation
- Equipped with a 4.3-inch TFT-LCD display (480*272 resolution)
- USB and LAN standard communication
- USB-GPIB module is optional
Smart Resistor an Automated Resistance Standard
- Eight resistance Standards
- Constant temperature bath
- Environmental immunity
- Characterization of standards
- Corrected for drift
- Low thermal emf scanner
- Internal datalogger
SMC9-E2KAPC/E2KAPC – SM 9UM Launch cord (160M)
- SM 9UM Launch cord (160M)
- For E2KAPC/E2KAPC
TS100-PRO-BT-TDR – Fluke Networks Cable Fault Finder with PowerBT Bridge Tap
TS100 PRO CABLE FAULT FINDER TDR KIT W/ BRIDGE TAP DETECT
- TS 100 PRO Cable Fault Finder with PowerBT Bridge Tap
- Bridge tap detection for xDSL pre-qualification
- Reports distance to multiple bridge taps up to 3,200 feet (975 metres)
- Sees past bridge taps to the end of the cable
- Long-distance tester—tests opens and shorts up to 8,000 feet (2.4 kilometres)
- Patented SmartTone tone generator with five different tones for exact pair identification
- Built-in TDR (Time Domain Reflector)
- AC/DC voltage detection
- One-button testing
- Built-in toner
Benefits:
- Affordable bridge tap detection
- Improve xDSL network performance
- Five-in-one tool—distance to bridge taps, open and short circuits, voltage detector
TS54-A-09-TDR – Fluke Networks Test Set, TDR, ABN with Piercing Pin
- Headset Compatible
- Highly Portable
- Familiar Cell Phone Menu (Contacts, etc)
- No-Reverse Battery Design
WaterLeak Acoustic Detector – AD21 HIKMICRO
- Acoustic leak detector.
- Supports four ranges of selectable digital bandpass filters
- Frequency range 150 to 7500 Hz.
- 1024×600 resolution.
- 7″/17.8 cm LCD touch screen.
- Up to 11 hours continuous running.
Zone2 Intrinsically Safe Thermal Imager – BX20 HIKMICRO
ATEX: II 3 G Ex ic IIC T6 Gc, II 3 D Ex ic IIIC T85°C Dc
IECEx: Ex ic IIC T6 Gc, Ex ic IIIC T85°C Dc
Thermal Resolution: 256 x 192 (49,152 pixels)
Temperature Measurement Range : -20°C ~ 550°C (-4°F ~ 1022°F)
25Hz image frequency
3.2” LCD screen display
Up to 6 hours of continuous running