Showing 169–180 of 1378 results

Show sidebar
Placeholder
Close

Fluke 2700G-G35M Reference Pressure Gauge, 0 to 5000 psi

$1,813.00
Excluding GST 10%

Features

  • Improved measurement accuracy for a wide variety of applications
  • Precision pressure measurement from 100 kPa (15 psi, 1 bar) to 70 MPa (10 000 psi, 700 bar)
  • Accuracy to 0.02% of full scale
  • Easy-to-use, rugged construction for reliable performance
  • Combine with the 700PTPK or 700HTPK pump kits for a complete portable pressure testing solution for up to 600 psi with the PTP-1 pneumatic pump and up to 10 000 psi with the HTP-2 hydraulic pump
  • Combine with the P5510, P5513, P5514, or P5515 Comparison Test Pumps for a complete bench top pressure calibration solution
  • Test port is ¼ NPT Male. ¼ BSP and M20 X 1.5 adaptors are included standard
  • USB communications cable and universal power supply provided standard
  • Can be used with COMPASS for Pressure software for automated recording of pressure calibration data
Placeholder
Close

Fluke 2700G-G35M/C Reference Pressure Gauge with Accreditation, 0 to 5000 PSI

$2,248.00
Excluding GST 10%

Features

  • Easy-to-use interface that allows you to configure the sampling rate, tare value, damping, and auto-off time interval as well as reset the min/max pressure
  • View the remaining battery life
  • Select from 21 different standard engineering units, including bar, in H2O, kPa, MPa, and psi
Placeholder
Close

Fluke 2700G-G70M Reference Pressure Gauge, 0 to 10 000 psi

$1,813.00
Excluding GST 10%

Features

  • Improved measurement accuracy for a wide variety of applications
  • Precision pressure measurement from 100 kPa (15 psi, 1 bar) to 70 MPa (10 000 psi, 700 bar)
  • Accuracy to 0.02% of full scale
  • Easy-to-use, rugged construction for reliable performance
  • Combine with the 700PTPK or 700HTPK pump kits for a complete portable pressure testing solution for up to 600 psi with the PTP-1 pneumatic pump and up to 10 000 psi with the HTP-2 hydraulic pump
  • Combine with the P5510, P5513, P5514, or P5515 Comparison Test Pumps for a complete bench top pressure calibration solution
  • Test port is ¼ NPT Male. ¼ BSP and M20 X 1.5 adaptors are included standard
  • USB communications cable and universal power supply provided standard
  • Can be used with COMPASS for Pressure software for automated recording of pressure calibration data

 

Placeholder
Close

Fluke 2700G-G70M/C Reference Pressure Gauge with Accreditation, 0 to 10 000 PSI

$2,248.00
Excluding GST 10%

Features

  • Easy-to-use interface that allows you to configure the sampling rate, tare value, damping, and auto-off time interval as well as reset the min/max pressure
  • View the remaining battery life
  • Select from 21 different standard engineering units, including bar, in H2O, kPa, MPa, and psi
Close

Fluke 279FC I/B Wireless True RMS Thermal Multimeter with iFlex and extra battery

$1,796.00
Excluding GST 10%
  • Product Features:

    • True RMS measurements
    • Built-in Fluke Connect button
    • Fully-featured multimeter with built-in thermal imager
    • 15 measurement functions including AC voltage with low-pass filter, DC voltage, resistance, continuity, capacitance, diode test, Min/Max/Avg, AC current (with iFlex), frequency
    • Thermal imaging reveals many electrical issues quickly and safely, eliminating need for time-consuming testing and validation
    • Two-in-one tool designed to increase productivity
    • iFlex expands measurement capabilities
    • Get into tight, hard-to-reach spaces for current measurement (up to 2500 A AC)
    • Designed to withstand 3 m (9.8 ft) drop
    • Double insulated with raised rubber holster for increased protection
    • Save measurements and images while communicating wirelessly with smart phone up to 20 feet (6.1 m) away (without obstructions)
    • Image resolution 80 x 60
    • 3.5 in. (8.89cm) color LCD screen
    • Rechargeable lithium ion battery allows for full work day (10+ hours, under normal conditions)
    • Auto power off saves battery life
    • CAT III 1000 V, CAT IV 600 V measurement category

    Applications

    • Industrial electricians
    • Facilities maintenance
    • Field service
    • General purpose electrical maintenance
    • Preventive and predictive maintenance
    • Troubleshooting

    Fluke Connect Mobile App

    • AutoRecord measurements: Take measurements automatically and instantly save them to your phone; wirelessly save measurements to Fluke Cloud and add text or audio annotations
    • TrendIt graphs: Trend measurements from a single session in a time series graph
    • ShareLive video call: View live tool measurements, video and audio to collaborate in real time with your entire team, without leaving the field
    • Fluke Cloud storage: Securely store up to 5 GB of data securely, per user
    • Reports: Create reports with accurate and traceable maintenance data
Close

Fluke 279FC Wireless TRMS Thermal Multimeter

$1,957.00
Excluding GST 10%
  • Full-featured multimeter with built-in thermal imager
  • 15 measurement functions including: AC voltage with low-pass filter, DC voltage, Resistance, Continuity, Capacitance, Diode test, Min/Max/Avg, AC current (with iFlex), Frequency
  • Thermal imaging reveals many electrical issues quickly and safely, eliminating the need for time-consuming testing and validation
  • Two-in-one tool is designed to increase productivity– no need to go back to the truck or office to retrieve a shared camera or wait for the thermographer do more in less time!
  • Designed for durability, built to withstand a 3 m (9.8Ft) drop, double insulated with raised rubber holster for increased protection
  • Save measurements and images while communicating wirelessly with a smart phone up to 20 feet/6.1 m away (no obstructions)
  • Image resolution–80 x 60
  • 3.5″/8.89 cm color LCD screen
  • Rechargeable lithium ion battery allows for a for a full work day (10+ hours) under normal conditions
  • Assembled in the USA
  • Three year standard warranty
  • Auto power off to save battery power
  • CAT III 1000 V, CAT IV 600 V measurement category
Close

Fluke 28 II Rugged Digital Multimeter

$862.00
Excluding GST 10%
  • Measure up to 1000 V AC and DC
  • Measure up to 10 A (20 A for 30 seconds)
  • 10,000 μF capacitance range
  • Frequency to 200 kHz
  • Extended AC voltage bandwidth– 15 Hz to 20 kHz
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Resistance, continuity and diode test
  • Min/Max and average recording to capture variations automatically
  • Peak min-max
  • Hi resolution 20,000 count display mode
  • True-rms ac voltage and current for accurate measurements on non linear signals
  • Backlit keypad buttons allow for easy visibility in low-lit areas
  • Large display digits and 2 level bright white backlight for increased visibility
  • Reversible holster for added protection when not in use
Placeholder
Close

Fluke 28-II TRMS Industrial Multimeter with IP67 Rating

$981.00
Excluding GST 10%

Features:

  • Measure up to 1000 V ac and dc
  • Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
  • Frequency to 200 kHz
  • Extended ac voltage bandwidth – 40 Hz to 30 kHz
  • Resistance, continuity and diode test
  • Min/Max and average recording to capture variations automatically
  • Peak min-max
  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
  • IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
  • Designed to withstand 3 meter drop (with holster)
  • True-rms ac voltage and current for accurate measurements on non-linear loads
  • Hi resolution 20,000 count display mode
  • Backlit keypad buttons allow for easy visibility in lowlit areas
  • Large display digits and 2 level bright white backlight for increased visibility
  • Reversible holster for added protection when not in use
  • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
  • Long battery life (800 hours)
  • Relative mode to remove test lead resistance from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
  • MSHA approval (pending)
Close

FLUKE 287 NUC TRUE-RMS ELECTRONICS LOGGING MULTIMETER

$1,444.00
Excluding GST 10%

Key features

  • Now compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional ir3000 FC infrared connector (sold separately).
  • Let your team see what you see in an instant with ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).
  • TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred.
  • Limited lifetime warranty.
Close

Fluke 287 True-RMS Electronics Logging Multimeter

$1,334.00
Excluding GST 10%
  • On board help screens for measurement functions.
  • Saved measurements allow you to name and recall measurements made in the field.
  • Multi-lingual interface.
  • Multiple logging sessions possible without download.
  • 0.025% basic DC accuracy.
  • 100 kHz AC bandwidth.
  • Real time clock for automatic time stamping of saved readings.
  • True-RMS AC voltage and current for accurate measurements on complex signals or non-linear loads. AC bandwidth specified to 100 kHz.
  • Measure up to 10 A (20 A for 30 seconds).
  • 100 mF capacitance range.
  • Temperature function.
  • Relative mode to remove test lead resistance from low ohms or capacitance measurements. • Peak capture to record transients as fast as 250 μs
Close

Fluke 287/FVF FlukeView Forms Combo Kit

$1,602.00
Excluding GST 10%

Fluke 287/FVF Offers

Features

  • Compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional IR3000 FC infrared connector (sold separately)
  • ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector which is sold separately)
  • TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred
  • Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times
  • Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy
  • Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event
  • Large 50,000 count, ¼ VGA display with white backlight
  • Multiple sets of measurement information can be simultaneously displayed at the same time
  • Logging function with expanded memory for unattended monitoring of signals over time
  • Using on-board TrendCapture users can graphically review logged readings without needing a PC that stores up to 15,000 recorded events
  • On board help screens for measurement functions
  • Saved measurements allow you to name and recall measurements made in the field
  • Multi-lingual interface
  • Multiple logging sessions possible without download
  • 0.025% basic DC accuracy
  • 100 kHz AC bandwidth
  • Real time clock for automatic time stamping of saved readings
  • True RMS AC voltage and current for accurate measurements on complex signals or non-linear loads
  • AC bandwidth specified to 100 kHz
  • Measure up to 10 A (20 A for 30 seconds)
  • 100 mF capacitance range
  • Temperature function
  • Relative mode to remove test lead resistance from low ohms or capacitance measurements
  • Peak capture to record transients as fast as 250 µs
  • FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents

Applications

  • R&D
  • Maintenance
  • Manufacture
  • Design of electronic circuits or systems
Close

Fluke 287/FVF/IR3000 FlukeView Forms Combo Kit with IR3000 FC Connector

$1,670.00
Excluding GST 10%

Features

  • Compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional IR3000 FC infrared connector (sold separately)
  • ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector which is sold separately)
  • TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred
  • Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times
  • Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy
  • Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event
  • Large 50,000 count, ¼ VGA display with white backlight
  • Multiple sets of measurement information can be simultaneously displayed at the same time
  • Logging function with expanded memory for unattended monitoring of signals over time
  • Using on-board TrendCapture users can graphically review logged readings without needing a PC that stores up to 15,000 recorded events
  • On board help screens for measurement functions
  • Saved measurements allow you to name and recall measurements made in the field
  • Multi-lingual interface
  • Multiple logging sessions possible without download
  • 0.025% basic DC accuracy
  • 100 kHz AC bandwidth
  • Real time clock for automatic time stamping of saved readings
  • True RMS AC voltage and current for accurate measurements on complex signals or non-linear loads
  • AC bandwidth specified to 100 kHz
  • Measure up to 10 A (20 A for 30 seconds)
  • 100 mF capacitance range
  • Temperature function
  • Relative mode to remove test lead resistance from low ohms or capacitance measurements
  • Peak capture to record transients as fast as 250 µs
  • FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents