Fluke TL27 Test Leads
Product Features:
- Safety shrouded, standard diameter banana plugs
- Heavy duty EPDM insulation
- Length 1.5 m
- Safety rating(s): CAT III 1000V, 10A
- UL listed
Fluke TL28A Automotive Test Lead Set
Features
- Large jaws, long leads and a piercing needle inside the jaws
- Solid, spring-loaded copper clips with a wide 0.50″ (12.7 mm) jaw opening and serrated teeth
- Large piercing needle for penetrating larger gauge wires located inside the jaws
- 60″ (1.5 m), silicone-insulated leads, useable from -112 to 158°F (-80 to 70°C)
- Rated for 30 V, 10 A
Fluke TL2X4W-PT7 2 x 4 Wire Ohms Test Lead, 1000V
Fluke TL2X4W-PT7 Offers
Features
- Two conductors per lead (one source and one measure)
- Perform 4 wire measurements with only two test leads
- 1000 volts maximum voltage between test lead and ground
- 1000 volts maximum transient over voltage and input voltage combined
Fluke TL2X4W-TWZ
Fluke TL2X4W-TWZ Offers
2X4 WIRE OHMS SMD TEST TWEEZER
Fluke TL40 Retractable Tip Test Lead Set
Product Features:
- Sharp needle point lead tips
- Adjustable to 76 mm
- Extra hard probe tips provide long service life
- Flexible silicone insulated test leads
- Safety rating(s): CAT II 600V, 3A
Fluke TL71 Test Lead Set
Fluke TL71 Offers
Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL71 premium test lead set has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V.
Features
- One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads
- Recommended for µV measurements
- CAT II 1000 V, 10 A rating
- CAT III 1000 V, CAT IV 600V only with protective cap
- One year warranty
Applications
- Test and measurement
- Oil and gas
- R&D
- Electronics design
- Electronics service
- Repair and maintenance
- Electrical
- Industrial
Fluke TL75 Hard Point Test Lead Set
Product Features:
- Comfort grip probes
- 48 in. PVC insulated test leads with right-angle shrouded banana plugs
- Recommended for general purpose measurements
- Safety rating(s): CAT II 1000V, 10A; CAT IV 600V, CAT III 1000V only with protective cap
- CSA listed
Fluke TL76 Test Lead Set
Features
- Removable, insulated IC caps allow probing on closely spaced leads and compliance with GS38
- CAT II 1000 V, 10 A rating
- CAT III 1000 V, CAT IV 600V only with protective cap
Fluke TL80A Basic Electronic Test Lead Kit
Fluke TL80A Offers
Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL80A Basic Electronic Test Lead Kit has the fundamental accessories for testing electronics. Includes the Fluke TL71 premium test lead set which has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V. The TL80A comes with the C75 accessory case to easily store your test leads.
Features
- One pair (red, black) each 1 meter long silicone test lead set, alligator clip and probe tip extender
- Probe tip size: 2 mm
- C75 soft carrying case
- CAT II 300 V. UL listed
- One year warranty
Fluke TL81A Deluxe Electronic Test Lead Kit
Fluke TL81A Offers
The Fluke TL81A Deluxe Electronic Test lead kit is ideal for testing electronic equipment. It offers test versatility with modular test probes, alligator clips, test clips and other accessories included and can attach directly to the SureGrip™ test leads. The kit consists of a quad fold nylon pouch containing 11 items.
Features
- Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures
- Insulated alligator clip rated up to 5A
- Insulated probe tip extender rated up to 3A
- Modular test probe with banana connector in the handle, rated up to 10A
- Modular hook-style clip test lead with banana connector, rated up to 5A
- Modular pinch-style clip test lead with banana connector, rated up to 5A
- Modular alligator clip with banana connector, rated up to 5A
- Slide-on IC probe tip adapter (rated up to 3A) and test lead couplers
- Bare spade lug with banana connector, rated up to 10A
- One year warranty
Applications
- Test and Measurement
- Oil and Gas
- R&D
- Electronics Design
- Electronics Service
- Repair and Maintenance
- Electrical
- Industrial
Fluke TL82 Automotive Pin & Socket Adapter Set
- Retractable shrouded test leads
- Complete set of 8 pin-and-socket adapters with flexible tips
- For work on Asian or European vehicles
- Collection of male and female adapters allows you to make firm connection to pin and socket connectors
- Useful when making voltage, frequency, duty cycle or resistance measurements
- A must for measuring current requiring meter be placed in circuit series
- Size 22 contact 0.030 in (0.76 mm) rated 5 A
- Size 20 contact 0.040 in. (1.02 mm) rated 7.5A
- Size 16 contact 0.063 in. (1.60 mm) rated 13
- Tested to 60 V DC
- Size 12 contact 0.093 in. (2.36 mm) rated 23
Fluke TL910 Electronic Test Probes
Product Features:
- 1 mm tips access hard to reach test points
- Probe tip length up to 100 mm
- Test lead length: 1 m
- 3 sets of spring loaded gold tips
- 2 sets of stainless steel tips
- Safety rating(s): CAT II 1000V, 3A
Fluke TL930 Patch Cords
Fluke TL930 Offers
- 1 pair (red, black) multi-stacking 4 mm banana plug patch cords
- Nickel-plated banana plugs
- 61 cm long PVC insulated leads
- 30 V rms or 60 V DC, 15 A
- One year warranty
Fluke TL932 Patch Cords
Fluke TL932 Offers
- 1 pair (red, black) multi-stacking 4 mm banana plug patch cords
- Nickel-plated banana plugs
- 90 cm long PVC insulated leads
- 30 V rms or 60 V DC, 15 A
- One year warranty
Fluke TL935 Patch Cords
Fluke TL935 Offers
- 3 sets (red and black pairs) of multi-stacking 4 mm banana plug patch cords
- Nickel-plated banana plugs
- 60 cm, 90 cm, 120 cm long PVC insulated leads
- 30 V rms or 60 V DC, 15 A
- One year warranty
- 1 – Patch Cord, 60 cm (Red)
- 1 – Patch Cord, 60 cm (Black)
- 1 – Patch Cord, 90 cm (Red)
- 1 – Patch Cord, 90 cm (Black)
- 1 – Patch Cord, 120 cm (Red)
- 1 – Patch Cord, 120 cm (Black)
Fluke TL940 Mini-Hook Test Leads
Fluke TL940 Offers
- 1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks
- Mini-hooks attach to component leads up to 1.5 mm diameter
- 90 cm long PVC insulated leads
- 30 V rms or 60 V DC, 15 A
- One year warranty
Fluke TL950 Mini-Pincer Test Leads
Fluke TL950 Offers
- 1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers
- Mini-pincers open to 2.3 mm
- 90 cm long PVC insulated leads
- 30 V rms or 60 V DC, 15 A
- One year warranty
Fluke TL960 Micro-Hook Test Lead Set
Fluke TL960 Offers
- 1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks
- Micro-hooks attach to component leads up to 1 mm diameter
- 90 cm long PVC insulated leads
- 30 V rms or 60 V DC, 15 A
- One year warranty
Fluke TL970 Hook and Pincer Kit
Product Features:
- TL940:
- Multi-stacking 4 mm banana plugs and mini-hooks
- Mini-hooks attach to component leads up to 1.5 mm diameter
- 90 cm PVC insulated leads
- Safety rating(s): 30Vrms or 60V DC, 3A
- TL950:
- Multi-stacking 4 mm banana plugs and mini-pincers
- Mini-pincers open to 2.3 mm
- 90 cm PVC insulated leads
- Safety rating(s): 30Vrms or 60V DC, 3A
- TL960:
- Multi-stacking 4 mm banana plugs and micro-hooks
- Micro-hooks attach to component leads up to 1 mm diameter
- 90 cm PVC insulated leads
- Safety rating(s): 30Vrms or 60V DC, 3A
Fluke TLK-220 SureGrip Industrial Test Lead Kit
Features
- 5-piece kit used for industrial applications
- CAT IV 600V & CAT III 1000V safety rating
- AC220 SureGrip alligator clips
- AC285 SureGrip large jaw alligator clips
- TP74 lantern tip test probes
- TL224 SureGrip insulated test leads
- C116 zippered soft case with moveable divider
Fluke TLK-225 SureGrip Master Accessory Set
- AC220 SureGrip alligator clips
- AC280 SureGrip hook clips
- AC283 SureGrip pincer clips
- AC285 SureGrip alligator clips
- TP220 SureGrip industrial test probes
- TL224 SureGrip insulated test leads
- Six-pocket storage pouch
Fluke TLK1550-RTLC Integral Test Lead &10 KV Clamp
Product Features:
- 10Kv clamp
- For use with Models 1550B, 1550C and 1555
Fluke TLK281 SureGrip Automotive Test Lead Kit
- Tested to 60V DC
Kit contains:
- TP81 Insulation Piercing Clip Set
- TL224 Suregrip™ Silicone Test Lead Set
- TP220 Suregrip™ Test Probe Set
- AC220 Suregrip™ Alligator Clip Set
- AC285 Suregrip™ Large Jaw Alligator Clip Set
- Soft Case
Fluke TLK282 Deluxe Automotive Test Lead Kit
Kit contains:
- TP81 Insulation Piercing Clip Set
- TP40 Automotive Back Probe Pins (five)
- TL224 Suregrip™ Silicone Test Lead Set
- TP220 Suregrip™ Test Probe Set
- AC220 Suregrip™ Alligator Clip Set
- AC285 Suregrip™ Large Jaw Alligator Clip Set
- AC280 Suregrip™ Hook Clip Set
- Soft Case
Fluke TLK287 Electronics Master Test Lead Set
Product Features:
- Designed for electronic testing and design
- Precision electronic probes with multiple spring-loaded sharp tips maximize contact with SMD test points
- Micro-grabbers and leads enable fine SMD testing
- Mini-alligator clips, grabbers and probes for virtually every electronics need
- Modular test leads and lead-probe combinations for versatility
- Couplers for long lead applications
Fluke TLK289 Test Lead Set
What’s included with the Fluke TLK289
- Test Lead Set
- Test Probes
- Alligator Clips
- Hook Clips
- Integrated Digital Multimeter Temperature Probe
- Magnetic Hanger
- Carrying Case
Fluke TLK290 Probe Set
Features
- Test probe set to be used on motor and three phase sockets
- Probes have flexible test points that fits securely between 0.16 to 0.3″ (4 and 8 mm) sockets
- For use with 0.16″ (4 mm) shrouded test leads
- Safe contact (for example, in CEE 16 A und CEE 32 A plugs)
- Probe CAT II 1000 V, 8 A; Alligator CAT III 1000 V, 16 A
Fluke TLK291 Fused Test Probe Set
Features
- Provides firm and secure contact
- 32 to 104°F (0 to 40°C) operating temp
- 80% RH max
- CAT III 1000V, 0.5A rated
- Pollution degree 2
Fluke TLS430 Test Leads and Alligator Clips
Features
- CAT IV 600V safety rating
- CAT III 1000V safety rating
- For use with 430 Series
Fluke TP1 Slim Reach Test Probes
Features
- One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals
- Hard stainless steel probe tips
- Flat blade design to hold securely in blade type electrical wall sockets
- CAT II 1000V, 10 A rating
Fluke TP165X Probe
Features
- Probe designed for 1500 and 1650 series
- Tip length up to 0.735in
- Tip diameter of 0.04in
- Slim probe with test button keeps your eyes on the panel while probing hard to reach points.
Fluke TP175 TwistGuard™ Test Probes 2mm Diameter Probe Tips
Key features
- Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements
- Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
Fluke TP175E Twistguard Test Probes – 2mm Diameter Probe Tips with 4mm Adapters
Product Features:
- Adjustable tip length for increases safety and precision
- Conforms to EN61010-031
- Safety rating(s): CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2
- UL listed
- For use with TL220 Series and Models TL238 and TL27
Fluke TP2 Slim Reach Test Probes
Features
- CAT II 1000V safety rated
- CAT III 1000V & CAT IV 600V with protective cap
- 10A rating
- UL listed
- 1-year warranty
Fluke TP220 SureGrip Test Probes
Product Features:
- Designed for probing closely spaced or recessed terminals
- Hard stainless steel probe tips
- Flat blade design holds securely in blade type electrical wall sockets
- Safety rating(s): CAT IV 600V, CAT III 1000V, 10A
- UL listed
- Rubber overmolded surfaces and finger-hugging curves
- Sharp, 12 mm stainless tip provides reliable contact
- For use with Models TL222 and TL224
- 1 – SureGrip Industrial Test Probe (Red)
- 1 – SureGrip Industrial Test Probe (Black)
Fluke TP38 Slim Reach Test Probes
Features
- 0.95in (24mm) tip length (includes insulated part)
- Only 0.16in (4mm) of tip is exposed
- CAT IV 600V & CAT III 1000V safety rating
- 10A rated & UL listed
- 1-year warranty