Close
Fluke H3 Clamp Meter Holster
- Fabric holster absorbs shocks and protects meter from rough handling
- Built-in pocket for lead storage
- 3 in. belt-loop with snap
- For use with 330 Series
Close
Fluke H5 Electrical Tester Holster
Product Features:
- Rugged fabric holster
- Flap for lead storage
- Built-in belt loop
- For use with Fluke Electrical Testers and Laser Distance Meters
Close
Fluke H80M Protective Holster with Magnetic Hanging Strap
- Yellow protective holster for all 80 series DMM’s (new as well as old)
- General purpose hanger
- Hook and loop straps
- Hanging magnet
- Dimensions (HxWxD): 190 mm x 95 mm x 43 mm (7.5 in x 3.7 in x 1.7 in)
Close
Fluke H900 Test Lead Holder
Features
- Mounting holes for securing to wall or surface
- 10.98 x 3.5 x 1.26 inches (27.9 x 8.9 x 3.2 cm)
- 1-year warranty
Close
Fluke HART DRYWELL CABLE Control Kit
This control kit includes a null modem to connect the Fluke 754 with Fluke Calibration dry wells and micro baths
Close
Fluke HC120-II Hook Clips, set of 2
Fluke HC120-II Specifications
- Maximum Voltage – 600 V rms CAT III per IEC 1010-2-031
- Maximum Wire Size – 2.5 mm
- Contact Material – Nickel plated steel
Close
Fluke HC80 Holster Case
Features
- Padded
- Inside pockets
- High quality polyester exterior
- One Year Warranty
The HC80 Holster Case is compatible with the following Fluke mainframe products
- Multimeters: 113, 114, 115, 116, 117, 77-4, 175, 177, 179, 83-V, 87-V, 233, 287, 289, 3000 FC
- Thermometers: 51-II, 52-II, 53-II, 54-II
- Clamp meters: 323, 324, 325
- Process calibrators and meters: 712, 712B, 714, 714B, 715, 787, 787B, 789
Close
Fluke HH290 Hanging Hook
Hanging Hook for ScopeMeter 190-Series II.
Close
Fluke HL-200 EX Intrinsically Safe Headlamp
Product Features:
- Light Output: High: 200 lumens, Low: 100 lumens
- Beam Distance: High: 100 meters, Low: 75 meters
- Light modes: High/Low/Off
- Run Time: High: 5 hours, Low: 12 hours
- Battery Size: 3xAAA
- Light Source: Cree XP-G2 LED
- IP Rating: IP67
- Intrinsically safe
- Dimensions: 80 x 50 x 45 mm
- UL USA: E336598, Class 1 div 1 and 2 Group ABCD, Class II div 1 and 2 Group EFG, Class III T4 IP67
- One-year warranty
Applications
- Oil and gas
- Mining
Close
Fluke I1000s AC Current Clamp
Features
- 10, 100, & 1000A nominal AC current ranges
- Continuous current ranges
- 0.1 to 10A (100mV/A output)
- 0.1 to 100A (10mV/A output)
- 1 to 1000A (1mV/A output)
- 1% +1A (48 to 65Hz) %reading + floorspec accuracy
- 2000A maximum non-destructive current
- CAT III 600V & CAT IV 300V
- 1-year warranty
Description
- Allows accurate measurement of currents from 100 mA to 1000 A rms, 5 Hz to 100 kHz without breaking into the circuit
- A passive filter eliminates noise and ring on rapidly rising di/dt waveform, ensuring accurate screen displays
- Connects directly to an oscilloscope through a reinforced coaxial cable and an insulated BNC connector
- Can be used with multimeters with optional PM9081/001 BNC/Banana adapter (sold separately)
Close
Fluke i1010 AC/DC Current Clamp
Features
- Hall sensor with 1mV/A output level
- 2% + 0.5A accuracy
- 1000A maximum non-destructive current
- 10kHz useable frequency
- Zero error adjustment
- Shrouded banana plug connector
- Optional kit includes carrying case
- CAT III 600V Safety rating
Close
Fluke i1010-KIT Current Clamp Kit
Product Features:
- AC/DC current range: 1A to 400A AC/DC
- Frequency range: 3 kHz
- Safety rating(s): CAT III 600V
- On/Off LED indicator
