Close
Fluke 87V-MAX True RMS Digital Multimeter with built-in thermometer
Product Features:
- IP 67 waterproof and dustproof protection, completely sealed for use in harsh environments
- Tested to withstand 4 meter (13 feet) drop (with holster)
- Measure up to 1000 V, up to 10 A (20 A for 30 seconds), AC and DC
- True-RMS voltage and current for accurate measurements on non-linear signals
- 10,000 μF capacitance range, frequency to 200 kHz
- Extended AC voltage bandwidth- 15 Hz to 20 kHz
- Low-pass filter for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built in thermometer conveniently allows users to take temperature readings without having to carry a separate instrument
- Min/Max/Average recording, plus 150 μs Peak min-max to capture variations automatically
- Resistance, continuity and diode test
- Large display digits and 2 level bright white backlight with backlit keypad buttons
- Hi resolution 20,000 count display mode
- Relative mode to remove test lead resistance from low ohms measurements
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
- Long battery life (800 hours)
- Safety rated CAT IV 600 V/CAT III 1000 V
- Battery type: Three AA batteries
Applications
- Industrial and facilities maintenance
- Cement plants and electrical utilities
- Food processing and chemical processing
- Steel mills and foundries
- Mining (MHSA approval pending)
- Military, petrochemical
Close
Fluke 87V/IMSK Industrial Multimeter Service KIT with the i400
Features
- Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
- True-RMS AC voltage and current for measuring non-linear signals
- Captures intermittents as short as 250 µS
- Safety rated CAT III 1000 V, CAT IV 600 V
- Built-in thermometer and temperature probe
- Easy access door for fast battery changes without breaking the calibration seal
- Removable holster with built in test lead and probe storage for convenience
- Audible Input Alert warning against wrong use of input jacks
- Provides peak capture and min/max/avg recording
- 6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
- Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Includes an analog bargraph for fast changing or unstable signals
- Presents a large digit display with bright, two-level backlight for easier reading in low light
- Delivers 0.05% DC accuracy
- Measures up to 1000 VAC and DC
- 10,000 µF capacitance range for components and motor caps
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch hold to capture stable readings of noisy signals
- Two-level backlit display
Applications
- Motor drives
- Plant automation
- Power distribution
- Electromechanical equipement
Close
Fluke 289/IMSK Digital Multimeter with i400 Current Clamp Combo Kit
FLUKE 289 Multimeter
- Large 50,000 count, Multiple sets of measurement information can simultaneously displayed at the same time.
- NEW – Logging function with TrendCapture is an essential tool for documenting performance. It plots measurements as a single line to help detect signal anomalies over time, storing up to 10,000 readings. Using on-board TrendCapture, you can graphically view logged readings without a PC
- Log multiple sessions or log data continuously
- i-info button on board help screens for measurement functions
FLUKE AC72 Alligator Clip set
- Slide-on alligator clips (red, black) for TL71/TL75
- Jaws provide 8 mm opening
- CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
Close
Fluke 289 FlukeView Forms Combo Kit with ir3000 FC connector
Features
- Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and Fluke Connect mobile app)
- TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred
- Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times
- Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy
- Low pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment
- LoZ volts, low impedance voltage function for eliminating ghost voltages
- Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event
- Large 50,000 count, ¼ VGA dot matrix display with white backlight
- Logging function with expanded memory for unattended monitoring of signals over time
- Using on-board TrendCapture users can graphically review logged readings without needing a PC
- Store up to 15,000 recorded events
- Save multiple logging sessions before PC download is necessary
- Two terminal 50 Ω range with 1 MΩ resolution, 10 mA source current
- On board help screens for measurement functions
- Real time clock for automatic time stamping of saved readings
- Relative mode to remove test lead resistance from low ohms or capacitance measurements
- True RMS AC voltage and current for accurate measurements on non-linear signals
- Measure up to 10 A (20 A for 30 seconds)
- 100 mF capacitance range
- Peak capture to record transients as fast as 250 µs
- Works with optional FlukeView forms to enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents
Applications
- Electronics
- Plant automation
- Power distribution
- Electro-mechanical equipment
Close
FLUKE 287 NUC TRUE-RMS ELECTRONICS LOGGING MULTIMETER
Key features
- Now compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional ir3000 FC infrared connector (sold separately).
- Let your team see what you see in an instant with ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).
- TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred.
- Limited lifetime warranty.
Close
Fluke 179/EDA2 True RMS Digital Multimeter and Deluxe Accessory Combo Kit
Features 179
- A full-featured, precision multimeter for troubleshooting electrical and electronic systems
- Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
- Includes a built-in thermometer to measure temperature without having to carry a separate instrument
- Allows closed-case calibration through front panel
- Safety rated CAT III 1000 V, CAT IV 600 V
Features AC280
- One pair (red, black) of nickel plated clips
- (Profile narrows to 0.22″ (5.6 mm) at tip, hook opening 0.25″ (6.4 mm) at front, 0.08″ (2 mm) at base
- CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed
Features TL224
- DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
- Right angle connector on one end and straight connector on the other
- Reinforced strain relief
- 4.9′ (1.5 m) silicone-insulated wire resists heat and cold
- CAT IV 600 V, CAT III 1000 V, 10 A rating, UL listed
Features TPAK
- Powerful magnetic hanger allows you to hang your meter on any metallic surfaces
- 9″ (229 mm) hook and loop strap allows you to loop around pipes
- Hook hanger for hanging on non-magnetic surfaces
- General purpose hanger allows you to hang your meter on nails, hooks and many other objects
- Compatible with many Fluke instruments
Features 80BK-A
- Type-K thermocouple with standard shrouded banana jack
- Convenient one piece construction
- Compatible with DMMs with temperature measurement functions
- 3.3′ (1 m) lead
Features TL910
- Very small 1 mm tips to access hard to reach test points
- Probe tip length up to 100 mm, test lead length: 1 m
- CAT IV 600 V, CAT III 1000 V, 3 A rating
Features C35
- Durable polyester 600D case construction for long life
- Case top opens laterally to allow use of test tool without removing it from the case and includes a strap to secure the test tool
- Compatible with 20, 70, 11X, 170 Series digital multimeters and other similar format test tools
Close
Fluke A3002 FC Wireless AC/DC Current Module
Features
- Use as a standalone meter or as part of the system
- Logging function for recording and saving up to 65,000 readings
- Magnetic hanging strap
Close
Data Logging Software and RS232 Cable for TMA10A
• Real-time software logs and displays data from all measurement functions
• Record two channels simultaneously
• Air Flow and Temperature with TMA10 device
• Save results for subsequent analysis
• Automatic calculation of results including maximum, minimum, average, and standard deviation
Close
Fluke 721EX-1601 Dual Sensor Pressure Calibrator, 16 PSIG/100 PSIG
Features
- Can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
- Two isolated, stainless steel, pressure sensors with 0.025% accuracy
- Switch test on both pressure inputs
- Pressure displayed in the user’s choice of 19 engineering units: psi, bar, mbar, kPa, kgcm2, cmH2O @ 4°C, cmH2O @ 20°C, mH2O @ 4°C, mH2O @ 20°C, inH2O @ 4°C, inH2O @ 20°C, inH2O @ 60°F, mmHg @ 0°C, inHg @ 0°C, ftH2O @ 4°C, ftH2O @ 20°C, ftH2O @ 60°F
- Precision temperature measurement with optional RTD probe
- Measures 4 to 20 mA signals
- Large backlit graphic display shows up to three inputs simultaneously
- Store five instrument setups for recall and use
Close
Fluke 721EX-1603 Dual Sensor Pressure Calibrator, 16 PSIG/300 PSIG
Features
- Can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
- Two isolated, stainless steel, pressure sensors with 0.025% accuracy
- Switch test on both pressure inputs
- Pressure displayed in the user’s choice of 19 engineering units: psi, bar, mbar, kPa, kgcm2, cmH2O @ 4°C, cmH2O @ 20°C, mH2O @ 4°C, mH2O @ 20°C, inH2O @ 4°C, inH2O @ 20°C, inH2O @ 60°F, mmHg @ 0°C, inHg @ 0°C, ftH2O @ 4°C, ftH2O @ 20°C, ftH2O @ 60°F
- Precision temperature measurement with optional RTD probe
- Measures 4 to 20 mA signals
- Large backlit graphic display shows up to three inputs simultaneously
- Store five instrument setups for recall and use
Close
Fluke 721EX-1605 Dual Sensor Pressure Calibrator, 16 PSIG/500 PSIG
Features
- Can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
- Two isolated, stainless steel, pressure sensors with 0.025% accuracy
- Switch test on both pressure inputs
- Pressure displayed in the user’s choice of 19 engineering units: psi, bar, mbar, kPa, kgcm2, cmH2O @ 4°C, cmH2O @ 20°C, mH2O @ 4°C, mH2O @ 20°C, inH2O @ 4°C, inH2O @ 20°C, inH2O @ 60°F, mmHg @ 0°C, inHg @ 0°C, ftH2O @ 4°C, ftH2O @ 20°C, ftH2O @ 60°F
- Precision temperature measurement with optional RTD probe
- Measures 4 to 20 mA signals
- Large backlit graphic display shows up to three inputs simultaneously
- Store five instrument setups for recall and use
Close
Fluke 721EX-1610 Dual Sensor Pressure Calibrator, 16 PSIG/1000 PSIG
Features
- Can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
- Two isolated, stainless steel, pressure sensors with 0.025% accuracy
- Switch test on both pressure inputs
- Pressure displayed in the user’s choice of 19 engineering units: psi, bar, mbar, kPa, kgcm2, cmH2O @ 4°C, cmH2O @ 20°C, mH2O @ 4°C, mH2O @ 20°C, inH2O @ 4°C, inH2O @ 20°C, inH2O @ 60°F, mmHg @ 0°C, inHg @ 0°C, ftH2O @ 4°C, ftH2O @ 20°C, ftH2O @ 60°F
- Precision temperature measurement with optional RTD probe
- Measures 4 to 20 mA signals
- Large backlit graphic display shows up to three inputs simultaneously
- Store five instrument setups for recall and use
