Close
Fluke 750P06EX Pressure Module, 0-100 PSIG
Features
- Digital communication eliminates errors due to poor connections and electrical interference
- The modules are inherently temperature compensated from 0 to 50°C (32 to 122°F)
- The modules are fully interchangeable because all measurements are completed in the pressure module itself and then communicated to the calibrator in digitized form
- Modules are calibrated independently of the calibrator, and can be used with any 718Ex or 725Ex calibrator
- Each module has its own serial number to maintain independent traceability
- Rugged construction, urethane over molding protects against shock if dropped and seals against dirt, dust, and moisture ingress
- Pressure connections are ⅛” NPT female, easily converted using adapter set
- ¼” NPT Male, ¼” BSP/ISO and M20 male adapters are provided with each pressure module
- Convenient setup, one-meter cable between the pressure module and calibrator reduces the length of connecting tubing to the pressure source
- Three-year warranty, best in class compared to competitors one year warranty
- Added IEC-Ex certification for compliance in extended geographies
Comparing pressure module specifications, it is important to compare both the temperature range the time period the specifications apply. Matching the pressure range to the application is critical for best performance in performing a calibration.
Applications
- Instrument Maintenance
- Control Systems
- Safety Systems
- Process and Environmental Monitors
Close
Fluke 750P05EX Pressure Module, 0-30 PSIG
Features
- Digital communication eliminates errors due to poor connections and electrical interference
- The modules are inherently temperature compensated from 0 to 50°C (32 to 122°F)
- The modules are fully interchangeable because all measurements are completed in the pressure module itself and then communicated to the calibrator in digitized form
- Modules are calibrated independently of the calibrator, and can be used with any 718Ex or 725Ex calibrator
- Each module has its own serial number to maintain independent traceability
- Rugged construction, urethane over molding protects against shock if dropped and seals against dirt, dust, and moisture ingress
- Pressure connections are ⅛” NPT female, easily converted using adapter set
- ¼” NPT Male, ¼” BSP/ISO and M20 male adapters are provided with each pressure module
- Convenient setup, one-meter cable between the pressure module and calibrator reduces the length of connecting tubing to the pressure source
- Three-year warranty, best in class compared to competitors one year warranty
- Added IEC-Ex certification for compliance in extended geographies
Comparing pressure module specifications, it is important to compare both the temperature range the time period the specifications apply. Matching the pressure range to the application is critical for best performance in performing a calibration.
Close
Fluke 750P01EX Pressure Module, 0-10 in H20 DIFF
Features
- Digital communication eliminates errors due to poor connections and electrical interference
- The modules are inherently temperature compensated from 0 to 50°C (32 to 122°F)
- The modules are fully interchangeable because all measurements are completed in the pressure module itself and then communicated to the calibrator in digitized form
- Modules are calibrated independently of the calibrator, and can be used with any 718Ex or 725Ex calibrator
- Each module has its own serial number to maintain independent traceability
- Rugged construction, urethane over molding protects against shock if dropped and seals against dirt, dust, and moisture ingress
- Pressure connections are ⅛” NPT female, easily converted using adapter set
- ¼” NPT Male, ¼” BSP/ISO and M20 male adapters are provided with each pressure module
- Convenient setup, one-meter cable between the pressure module and calibrator reduces the length of connecting tubing to the pressure source
- Three-year warranty, best in class compared to competitors one year warranty
- Added IEC-Ex certification for compliance in extended geographies
Comparing pressure module specifications, it is important to compare both the temperature range the time period the specifications apply. Matching the pressure range to the application is critical for best performance in performing a calibration.
Applications
- Instrument Maintenance
- Control Systems
- Safety Systems
- Process and Environmental Monitors
Close
Fluke 750SW DPCTrack2 Software
Features
- Improved user interface – The improved user interface allows for easy navigation with multi-window functionality. After logging in, explore the improved graphical user interface. This manual also explains some of the new features that enhance usability and productivity. For more information, please see the DPC/TRACK2™ User Manual located on the CD-ROM.
- Improved Multi-COM port support -Communicate with your Fluke Documenting Process Calibrators (DPCs) easily and without configuration file changes through USB or RS232 Serial ports.
- Drywell source mode support – The Software now supports calibrations performed with Drywell test standards.Reminders Screen – Use automatically-generated reminders to stay informed on all work items needing attention including Calibrations Awaiting Finalization, Calibrations Due, Records Awaiting Approval, and more.
- DPCTrack Explorer – Use this feature to easily navigate through all of the Software’s item records and view calibrations that are coming due.
- User Defined Labels and Variables -The Software features an unprecedented level of customization ability with the ability to redefine most field names and create user-defined variables to ensure the Software functions as necessary.
- Keep on Schedule and End of Month scheduling – These scheduling features give a greater degree of control when rolling calibration frequencies.
- More Reports – Powered by Crystal Reports 11, DPC/TRACK2™ reporting system contains over 40 standard loaded reports that can be printed or exported to multiple file formats.
- Equipment/Loops – Track asset configurations with Loops and Equipment, allowing associated items to be managed as a group or individually.
- Advanced Query Capability – Powerful query capabilities allow advanced searches to easily locate desired records.
- Set Required Fields – Define what fields must be completed when entering new records.
- Multiple Test Point ranges – Multiple Test Point groups allow for advanced calibration procedures with an easy to use interface.
Close
Fluke FLUKE-729/750SW BU 729 Automatic Pressure Calibrator and DPC/TRACK2 Software Bundle
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- Build instrumentation maintenance routes and load to Fluke 729 Automatic Pressure Calibrators
- Select downloaded tasks in the field configured to match field the instruments being calibrated
- Upload calibration results with field documented calibrations
- Track asset and loop configurations, allowing associated items to be managed as a group or individually
- Graphical user interface featuring DPC/TRACK Explorer. Use DPC/TRACK Explorer to easily navigate through all of the records and view calibrations that are coming due
Applications
- Oil & Gas
- Food & Beverage
- Water/Wastewater
- Pharmaceuticals
Close
Fluke 729/750SW BU 729 Automatic Pressure Calibrator and DPC/TRACK2 Software Bundle
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- Build instrumentation maintenance routes and load to Fluke 729 Automatic Pressure Calibrators
- Select downloaded tasks in the field configured to match field the instruments being calibrated
- Upload calibration results with field documented calibrations
- Track asset and loop configurations, allowing associated items to be managed as a group or individually
- Graphical user interface featuring DPC/TRACK Explorer. Use DPC/TRACK Explorer to easily navigate through all of the records and view calibrations that are coming due
Applications
- Oil & Gas
- Food & Beverage
- Water/Wastewater
- Pharmaceuticals
Close
Fluke 729 300G FC Pressure Calibrator, 300 PSI, 20 Bar with Fluke Connect
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
Close
Fluke 729 300G Pressure Calibrator, 300 PSI, 20 Bar
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
Close
Fluke 729 150G FC Pressure Calibrator, 150 PSI, 10 Bar with Fluke Connect
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
Close
Fluke 729 150G Pressure Calibrator, 150 PSI, 10 Bar
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
Close
Fluke 729 30G FC Pressure Calibrator, 30 PSI, 2 Bar with Fluke Connect
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
Close
Fluke 729 30G Pressure Calibrator, 30 PSI, 2 Bar
Features
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility. Measure temperature with optional 720RTD probe. On FC Models Only.
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software
- Innovative semi-rigid carrying case designed for field work
Applications
- Process Technicians
- Calibration Labs
- Pressure Sourcing
- Control and Measurement
