Close
Fluke C115 Soft Carrying Case
Product Features:
- Includes two padded pockets for protection of two test tools
- Durable polyester 600D case construction for long life
- Pouch for test leads and accessories
- For use with many Fluke instruments
Close
Fluke i310S AC/DC Current Clamp
- Current Ranges: 30 A and 300 A ACrms or ±45 A and 450 A DC
- Measuring Ranges: ±45 A and 450 A
- Output Sensitivity: 10 mV/A (40 A) to 1 mV/A (400 A)
- Resolution: ±50 mA (40 A) to ±100 mA (400 A)
- Load Impedance: > 10 k Ohms and 100 pF
- Frequency Range (small signal): DC to 20 kHz (- 3 dB)
- Phase Shift below 1 kHz, < 2 degrees
- Temperature Coefficient: ±0.1% of reading / ±C
- Power Supply: 9 V Alkaline
Close
Fluke i30s AC/DC Current Clamp
Features
- Usable current range
- 5mA to 30A DC
- 30mA to 20A AC RMS
- ±1% of reading ±2mA (@25°C)
- 100mV/A output sensitivity
- ±1mA resolution
- 1.4in crest factor
- >100kΩ load impedance
- 100kHz frequency
Close
Fluke i30 AC/DC Current Clamp
- AC current range: 30mA to 20Arms
- DC current range: 30mA to 30A DC
- Frequency range: DC to 20 kHz (-0.5 dB)
- Safety rating(s): CAT III 300V
Close
Fluke 80i-110s AC/DC Current Clamp
Features
- 10 or 100A AC/DC nominal current range
- Continuous current range
- 0.1 to 10A AC/DC (100mV/A output)
- 1 to 100A AC/DC (10mV/A output)
- ±3% of reading +50mA (100mV/A, 50mA to 10A)
- ±4% of reading +50mA (10mV/A, 50mA to 40A)
- ±12% of reading +50mA (40 to 80A)
- ±15% of reading (80 to 100A)
- Maximum non-destructive current of 140A (2kHz)
- Lowest measurable current of 0.1A
- 100kHz useable frequency
- CAT II 600V & CAT III 300V
- 1-year warranty
Close
Fluke i1010 AC/DC Current Clamp
Features
- Hall sensor with 1mV/A output level
- 2% + 0.5A accuracy
- 1000A maximum non-destructive current
- 10kHz useable frequency
- Zero error adjustment
- Shrouded banana plug connector
- Optional kit includes carrying case
- CAT III 600V Safety rating
Close
Fluke i410 AC/DC Current Clamp
Features
- Battery-powered Hall-effect probe measures 1 to 400 A
- 1 mV/Amp output guarantees easy reading on your meter
- Take accurate current readings without breaking the circuit
- Maximum conductor Ø 32 mm
- CAT III 600 V safety rating
Close
Fluke i3000s AC Current Clamp
Features
- For measurement on power distribution systems
- Current ranges with 2% + 2A basic accuracy
- 1 to 30A (10mV/A output)
- 1 to 300A (1mV/A output)
- 1 to 3000A (0.1mV/A output)
- 4000A maximum non-destructive current
- 10Hz to 100kHz usable frequency
- 64mm maximum conductor diameter
- CAT III 600V safety rating
- 1-year warranty
Close
Fluke i200 AC Current Clamp
-
Fluke I200 Offers
Features
- Companion to a DMM for measuring up to 200 A AC
- 1 mA per Amp output guarantees easy reading on you meter
- Take accurate current readings without breaking the circuit
- Max. conductor Ø 0.8″ (20 mm)
- CAT III 600 V safety rating
Close
Fluke i6000s Flex AC Current Clamp
Features
- AC RMS current ranges with ±1% accuracy
- 60A (50mV/A output)
- 600A (5mV/A output)
- 6000A (0.5mV/A output)
- 10Hz to 50kHz frequency
- 100kΩ minimum load impedance
- CAT III 600V safety rating
Close
Fluke I1000s AC Current Clamp
Features
- 10, 100, & 1000A nominal AC current ranges
- Continuous current ranges
- 0.1 to 10A (100mV/A output)
- 0.1 to 100A (10mV/A output)
- 1 to 1000A (1mV/A output)
- 1% +1A (48 to 65Hz) %reading + floorspec accuracy
- 2000A maximum non-destructive current
- CAT III 600V & CAT IV 300V
- 1-year warranty
Description
- Allows accurate measurement of currents from 100 mA to 1000 A rms, 5 Hz to 100 kHz without breaking into the circuit
- A passive filter eliminates noise and ring on rapidly rising di/dt waveform, ensuring accurate screen displays
- Connects directly to an oscilloscope through a reinforced coaxial cable and an insulated BNC connector
- Can be used with multimeters with optional PM9081/001 BNC/Banana adapter (sold separately)
Close
Fluke i400s AC Current Clamp
Features
- Take current readings without breaking the circuit
- 0.5 to 40A (10mV/A output)
- 2% + 0.015A accuracy
- 5 to 400A (1mV/A output)
- 2% + 0.04A accuracy
- 32mm maximum conductor diameter
- Soft non-slippery overmold handle
- 1-year warranty
Compatible with
- Fluke 114 Electrical Multimeter
- Fluke 117 Electrician’s Multimeter with Non-Contact Voltage
- Fluke 434-II and 435-II Power Quality and Energy Analyzers
- Fluke 438-II Power Quality Analyzer and Motor Analyzer
- Fluke PQ400 Electrical Measurement Window
